
Local chimney contractor for Arlington, Duval County
Before any repair starts in Arlington, a free inspection gets you a plain explanation of the problem and the price.
- Family owned and operated
- Free inspection and estimate
- Same-day service available
- Upfront pricing, no hidden fees
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
or call (904) 920-5495
Why Choose Us
Why Arlington homeowners call our chimney pros
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off when you book today
Our Services
Chimney and fireplace services in Arlington
-
Chimney Sweep in Arlington Soot and early creosote brushed out of the flue, smoke chamber and firebox.
-
Gas Fireplace Repair in Arlington Gas units that will not light, stay lit or burn right, plus service.
-
Chimney Repair in Arlington Any failed part of the chimney, found, named and fixed in a sensible order.
-
Fireplace Repair in Arlington Firebox, damper, hearth, surround and smoke problems on any fireplace.
-
Chimney Inspection in Arlington The whole system checked against NFPA 211, with findings shown on site.
-
Chimney Cap in Arlington Rain, animals and embers kept out of the flue by a fitted cap.
- Flashing Repair in ArlingtonThe metal joint between roof and chimney, re-formed so rain runs past it.
- Chimney Leak Repair in ArlingtonWater coming in at the chimney, traced by testing and stopped where it enters.
- Crown Repair in ArlingtonThe concrete top of the chimney, sealed or recast so it sheds water again.
- Chimney Masonry in ArlingtonCracks, open joints and damaged brick repaired with matched mortar.
- Chimney Liner in ArlingtonA listed stainless liner sized to the appliance and run the full flue height.
- Waterproofing in ArlingtonBrick that soaks up rain treated with a breathable repellent.
- Chimney Rebuild in ArlingtonLoose, cracked or leaning masonry taken down to sound brick and relaid.
- Chase Cover in ArlingtonA rusted or ponding chase top replaced with one that drains.
- Fireplace Installation in ArlingtonNew and replacement fireplaces, factory-built or masonry, with their chimneys.
- Gas Fireplace Install in ArlingtonDirect-vent and B-vent gas fireplaces, framed and vented to the manual.
- Animal Removal in ArlingtonAnimals and nests cleared from the flue, debris cleaned out, entry closed off.
10% off your first service when you book today
First visit with us? The first service is 10% off.
Working with us in Arlington
Permits come up in Arlington for some chimney and fireplace jobs and not for others, and the local building department decides which. As a general pattern, work that changes the structure or adds an appliance is the kind that goes through a permit. That covers rebuilding a chimney, adding a new fireplace or factory-built chimney, and installing a new gas appliance with its venting and gas connection.
Work that replaces a part like for like, such as a new cap on an existing flue or repointing a few joints, is the kind that may not. Rules change and vary between jurisdictions, so we check before the work is scheduled rather than guessing from memory. When a permit applies, the estimate says so, names who applies for it, and shows the permit time in the schedule.
The work is then built to the code and the listing, and the building department's final inspection closes the permit. If a gas supply line or a new electrical circuit is part of the job, that trade handles its own permit and inspection, and the paperwork shows who does which part.
Unpermitted work from a past owner sometimes turns up during our visits, such as a gas appliance added to an old flue, and when we see it, we tell you what we saw and what it would take to put right. We do not quote code sections we have not checked against the current edition, and when a question is really for the building department, we say so.
Keep the permit card and the final inspection record with your house papers, since a buyer may ask to see them later. Work done under a permit also leaves an inspection record, which is useful the day the house is sold and a buyer's inspector asks how the chimney was repaired. For permitted jobs such as rebuilds and new fireplaces, the estimate names who applies for the permit.
Give us a call at (904) 920-5495; the inspection in Arlington is free and the estimate comes in writing.
About Arlington
- Arlington is one of the named neighborhoods of Jacksonville.
- Arlington is part of Duval County.
- More than about six miles separate Arlington from the coast.
- Jacksonville University is located in Arlington.
- About 4 miles, as the crow flies, separate Arlington from Jacksonville.
Sources: Wikipedia; 2020 Census; Census TIGER/Line 2020; computed from coordinates

How It Works
Four simple steps
-
You call or send the form
A person answers, asks what you are seeing and sets a time that works for you.
-
We look before we price
We inspect the parts involved, from the firebox up to the top of the flue, and show you what we find.
-
Written estimate
You get the scope and the price in writing before any work starts. No charge for the estimate.
-
The work, then a walk-through
We do the job we wrote down, clean up, and walk you through what changed.
FAQ
Questions from Arlington
What counts as an emergency for the 24/7 line?
Water coming into the house at the chimney, a cap or chase cover blown loose, an animal trapped in the flue, or a chimney that needs checking after the fire department has put out a chimney fire. If you smell gas, see smoke in the room or hear a carbon monoxide alarm, get everyone outside and call 911 or the gas utility first. Then call our 24/7 emergency line.
Do you work on gas and electric fireplaces in Arlington?
Yes. We service and repair vented gas fireplaces, gas inserts and log sets, vent-free units and electric fireplaces. Gas supply lines and new electrical circuits are separate trades, and the estimate says who does that part. Our work covers the appliance, its venting and its setup.
Can you work alongside my roofer?
Yes, and it can save a second trip up the roof. When a roof is being replaced, the chimney flashing is the joint where our work and the roofer's meet, so we agree beforehand who installs the step flashing and who cuts in the counter flashing. We do not replace roof coverings. If the roof itself has failed around the chimney, we say so and leave that part to the roofer.
Book your free inspection
One call gets you a time slot and a free inspection. No pressure to decide on the day.
Free Inspection