Proudly American ยท Family-Owned & Operated

Call (904) 920-5495

Call(904) 920-5495

Local chimney inspection for Arlington homes

A free Arlington chimney inspection that ends with answers on what is sound, what needs work now and what can wait.

  • Family owned and operated
  • Free inspection and estimate
  • Same-day service available
  • Upfront pricing, no hidden fees

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

10%OFF TODAY

or call (904) 920-5495

Why Choose Us

Local inspection experts for Arlington homes

  • Locally owned in Jacksonville
  • Family owned and operated
  • 100% satisfaction guaranteed
  • Free inspection and estimate
  • Same-day service available
  • 10% off when you book today

You can look at what we saw on your Arlington chimney, from the flue tile to the flashing.

  • Free inspection and estimateThe chimney inspection at your Arlington home costs nothing, and a clean result is reported as clean.
  • Locally owned and operatedA locally owned business shows you what it sees, so the findings are yours to check.
  • No hidden feesAny repair that comes out of the inspection gets its own line and price before you decide.

Tracing water stains near the chimney

A stain on a ceiling, or on the wall next to the chimney, says water got in; it does not say where. The inspection works from the top down: crown cracks and the seal around the flue tile, cap fit, flashing laps, and the brick faces and joints above the roof. Inside, the damper, the firebox walls and the attic framing around the stack show how far the water traveled.

Each likely entry point is noted with the evidence for it, so the repair aims at the source in your Arlington house rather than the stain. Buying or selling in Arlington? Call (904) 920-5495 and tell us the closing date.

Arlington is a neighborhood inside Jacksonville city limits. Arlington sits in Duval County.

What's Included

Inspection work we handle in Arlington

  • Firebrick and back wall checked for through cracks
  • Deposit in the flue graded
  • Attic airspace and fireblocking checked where reachable
  • Factory-built units checked against their listing label

How It Works

From firebox to cap in Arlington

  1. Firebox, damper and throat first

    We start where the fire sits, checking the firebrick, the hearth, the damper and the chamber above it.

  2. Flue checked end to end

    A strong light and a mirror from below, and a look from the top where footing is safe, show the full run of tile.

  3. Clearances, attic and roof

    Gaps to framing are measured where we can reach them, then the crown, cap, flashing and height are checked up top.

  4. Findings shown, repairs ranked

    You see each finding on site, and any repair goes on a written estimate ranked by how soon it matters.

Local Conditions

Factory-built fireplaces in Arlington

A factory-built fireplace is tested as a unit, and its listing label names the parts and clearances that keep it safe.

We read the label during inspections in Arlington and check the firebox panels, the pipe and the chase top against the maker's manual.

10% off your first service when you book today

Book a chimney inspection in Arlington today, and any first repair with us is 10% off.

Checking the hearth extension against the opening

The hearth extension is the noncombustible floor in front of and beside the fireplace, and its size follows the size of the opening. For an opening smaller than 6 square feet the code asks for 16 inches in front and 8 inches to each side; at 6 square feet or more, 20 inches in front and 12 to each side (FBC R1001.10).

The inspection measures the opening and the extension, and checks the extension for cracks or loose tiles that could let an ember reach wood below. A short extension is recorded with the amount it falls short by. Raised hearths are measured the same way, at floor level in front.

Flue area against an appliance connector

For a stove, furnace or other appliance, the flue it vents into may not be smaller in area than the connector feeding it (FBC R1003.14). The inspection reads the connector size and compares it with the flue or liner. Too small restricts the exhaust; much too large lets it slow and cool. For gas appliances, sizing comes from NFPA 54 and the appliance's installation manual instead.

When two appliances share one flue, each connection is checked, since the combination changes what the flue has to carry. The manual for each appliance is asked for at booking so the check has the right numbers.

Flashing where the chimney meets the roof

The joint between chimney and roof is covered by two layers of metal: base or step flashing worked in with the roofing, and counterflashing let into the brick that laps over it. The inspection looks for counterflashing pulled out of its joint, sealant used in place of a proper lap, gaps at the corners, and rust or holes in the metal.

The code covers roof flashing in its roofing chapter, chapter 9 of the Residential volume, alongside the roofing maker's details. The findings describe the flashing only; the condition of the roof covering itself is left to a roofer. Loose or missing counterflashing is measured along each side of the stack.

Free Inspection

Firebox, flue, roof and attic

  1. Smoke chamber walls examined for gaps, loose courses and deposit
  2. Flue area compared with the fireplace opening or the appliance connector
  3. Crown slope, drip edge and the bond break at the flue looked at
  4. Flashing and masonry above the roof examined for gaps and loose brick

FAQ

Inspection questions from Arlington

Do you inspect chimneys in Arlington?

We do inspections in Arlington. Tell us why you want one and what the fireplace burns, and we plan the visit around that.

If the inspection is free, where does the 10% off come in?

The inspection itself costs nothing. If it turns up work and that work is your first service with us, 10% comes off that job. Ask for it on the call.

Firebox to cap, free

Closing on a house or planning the first fire? Tell us the date when you call (904) 920-5495, and the inspection in Arlington is set around it.

Free Inspection

Call the chimney and fireplace experts

(904) 920-5495

Free inspection and written estimate

Call (904) 920-5495