Local chimney inspection for Sandalwood homes

A free inspection in Sandalwood that measures clearances, reads the flue end to end and flags any needed work.

Family owned and operated
Free inspection and estimate
Same-day service available
Upfront pricing, no hidden fees

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

or call (904) 920-5495

Why Choose Us

Chimney inspection specialists who explain every finding

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off when you book today

You can look at what we saw on your Sandalwood chimney, from the flue tile to the flashing.

Free inspection and estimateThe chimney inspection at your Sandalwood home costs nothing, and a clean result is reported as clean.
Locally owned and operatedA locally owned business shows you what it sees, so the findings are yours to check.
No hidden feesAny repair that comes out of the inspection gets its own line and price before you decide.

Call (904) 920-5495 Free Inspection

Before a new stove or insert goes in

Connecting a new appliance changes what the chimney has to do, and NFPA 211 treats that change as a reason for a closer look than the yearly check. The questions are practical. Is the flue the right size for the new appliance's collar, or far too large? Is the lining suited to the fuel? Will the connector keep its clearances where it passes through the wall?

The answers decide whether the chimney can take the appliance as it stands or needs a liner first. It is easier to learn that before the stove arrives in your Sandalwood living room than after. Anything you have noticed goes first on our list in Sandalwood; mention it at (904) 920-5495.

The county for Sandalwood is Duval County. Sandalwood sits inland, more than about six miles from the coast.

What's Included

Inspection work we handle in Sandalwood

Firebrick and back wall checked for through cracks
Crown, cap and flashing checked from the roof
Attic airspace and fireblocking checked where reachable
Findings for your Sandalwood home explained on site

Call (904) 920-5495 Free Inspection

How It Works

From firebox to cap in Sandalwood

Firebox, damper and throat first
We start where the fire sits, checking the firebrick, the hearth, the damper and the chamber above it.
Flue checked end to end
A strong light and a mirror from below, and a look from the top where footing is safe, show the full run of tile.
Clearances, attic and roof
Gaps to framing are measured where we can reach them, then the crown, cap, flashing and height are checked up top.
Findings shown, repairs ranked
You see each finding on site, and any repair goes on a written estimate ranked by how soon it matters.

Local Conditions

The yearly check in Sandalwood

NFPA 211 calls for a chimney to be inspected every year. The check confirms the chimney is sound, free of deposits and clear of anything that would stop it working.

For most chimneys in Sandalwood that is a short visit, and a clean result is written down as clean.

10% off your first service when you book today

Inspection first, then 10% off your first repair when you book today.

Call (904) 920-5495 Free Inspection

Fireblocking at each floor and ceiling

At every floor or ceiling the chimney passes, the gap between the masonry and the framing is supposed to be closed with noncombustible material fastened in place, so a fire cannot race up the void beside the chimney (FBC R1003.19). Against wood joists, the code says that fireblocking must support itself or rest on strips of metal or metal lath.

In an attic or an unfinished lower level, the inspection looks for that material. Open gaps, missing pieces, or combustible fill such as wood scraps or paper-faced insulation are recorded as findings. Gaps are measured so any repair can be sized from the findings.

Flue size measured against the fireplace opening

An open masonry fireplace needs a flue big enough to carry away what its opening produces. The code ties the two together: a round flue at least one-twelfth the area of the opening, a square one at least one-tenth (FBC R1003.15.1). The inspection measures the opening's width and height and the flue's inside dimensions, then does the arithmetic.

A flue that comes up short explains smoke rolling out at the top of the opening. One far too large for a stove later set into the fireplace explains heavy deposit. Either result goes into the findings with the numbers. The measurements are kept, so any later liner estimate starts from them.

Chimney height against the roof around it

Height is set by code: a chimney has to rise 3 feet or more above its roof penetration, and 2 feet or more above anything on the building within a 10-foot radius (FBC R1003.9). A stack that falls short can struggle to draw when wind crosses the roof or when a taller part of the house sits close by.

The inspection measures from the roof at the chimney and checks the circle around it, which is where an addition or a raised roof section can put a once-compliant chimney out of line. A short stack is recorded with the height it lacks.

Free Inspection

Firebox, flue, roof and attic

Smoke chamber walls examined for gaps, loose courses and deposit
Crown slope, drip edge and the bond break at the flue looked at
Stove connector support, joints, pitch and thimble condition recorded
A plain list of anything that could not be reached, and why

FAQ

Inspection questions from Sandalwood

Will you need to get into the attic?

If the chimney passes through an attic, yes, because the attic is where clearances to framing and fireblocking can be seen. If there is no safe access, the findings say what could not be checked.

Do I get the findings in writing?

Yes. After they are explained on site, anything that needs work is written up on an estimate, one finding per line, with its repair and its urgency.

Our Services