Fireplace repair in Sandalwood by local experts

Each repair on a fireplace in Sandalwood follows a free inspection and upfront pricing, with no hidden fees.

Family owned and operated
Free inspection and estimate
Same-day service available
Upfront pricing, no hidden fees

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

or call (904) 920-5495

Why Choose Us

Fireplace repair pros for Sandalwood homes

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off when you book today

A fireplace repair in Sandalwood starts by settling whether the unit is masonry or factory-built, since the rules differ.

Locally owned and operatedA locally owned business shows you the failing part of your Sandalwood fireplace before any price.
Upfront pricing, no hidden feesSafety repairs come first on the estimate, and items that can wait are priced on their own lines.
100% satisfaction guaranteedIf the fireplace still smokes or sticks after the repair we quoted for it, we come back.

Call (904) 920-5495 Free Inspection

Same-day visits in Sandalwood, when the schedule allows

Same-day service is available, and it means what it says: when the schedule has an opening, we can come the day you call. It is not a promise for every call. If your fireplace has a problem that makes it unsafe to use, such as a damper stuck shut or a firebox wall coming apart, tell us on the phone so the call is sorted by urgency. Whether the visit is the same day or later, you get the same result, a written estimate with the cause and the repair, and the work happens only after you approve it. We bring the likely parts to the free fireplace check in Sandalwood; call (904) 920-5495.

Sandalwood lies inland, over six miles from the coast. The direct distance from Jacksonville to Sandalwood is about 6 miles.

What's Included

Fireplace repairs for Sandalwood homes

Masonry or factory-built settled before any part is named
Refractory panels ordered by the model on the rating plate
Damper plate, pivot and handle worked and repaired
Rough smoke chamber parged smooth

Call (904) 920-5495 Free Inspection

How It Works

How our fireplace pros repair a fireplace in Sandalwood

Masonry or factory-built checked
We read the firebox and the rating plate first, since the answer sets which rules and parts apply.
Firebox, damper and hearth tested
Joints are probed, the damper is worked from shut to open, and the hearth and trim distances are measured.
Refractory work or listed parts
A masonry firebox gets firebrick and refractory mortar. A factory-built unit gets the maker's parts by model number.
Test fire and walk-through
A small test fire shows the draft, and you hear exactly what was fixed.

Local Conditions

Smoke coming into the room in Sandalwood

Smoke spilling out of the opening has a handful of causes: a damper not fully open, a cold flue, a house short of air or an opening too big for its flue.

A short test fire at your Sandalwood home shows which one it is, and each has a fix far smaller than a rebuild.

10% off your first service when you book today

First fireplace repair with us? It is 10% off.

Call (904) 920-5495 Free Inspection

A damper plate that has rusted thin

A throat damper is a cast iron or steel plate on a pivot, sitting in a frame at the top of the firebox. Rust works on it from both sides, with moisture coming down the flue from above and ash and condensation below.

Once the plate thins, it warps, stops seating in its frame and eventually breaks at the pivot. We check the plate by feel and by tapping, since a coat of soot can hide how much metal is left. A plate with sound metal is cleaned and its pivot freed, and a thin one is replaced with a damper sized to the throat.

Loose tile at the front edge of the hearth

The front edge of the hearth extension takes the heat of the fire and the traffic of the room, and tile there can loosen when the adhesive under it was not meant for the heat. A hollow sound when you tap the tile is the sign. The repair lifts the loose pieces, removes the old adhesive down to a clean noncombustible base, and resets the tile in a setting material rated for the temperature at that spot. Matching an older tile can be the hard part, so you know whether we are resetting your original pieces or need replacements.

Soot on the brick above the opening

A dark fan of soot on the brick above the opening is a record of smoke spilling out of the fireplace. Cleaning it off is easy, but the stain comes back unless the cause is found. The shape helps. Staining across the full width of the opening points to an opening too tall for its draft, while staining on one side can point to a damper that opens unevenly or a fire built off center. We read the stain, run a test fire to confirm, and the fix for the cause comes with cleaning the face with a cleaner that suits the brick or stone.

Free Inspection

Tested in Sandalwood before a fireplace repair is priced

Cracked or loose firebrick cut out and replaced, counted brick by brick
Test fire with the damper open, and the smoke path noted
Lintel over the opening checked for rust and lifted brick
Gas or electric faults noted and routed to the right repair

FAQ

Before the firebox is opened up

Do you repair factory-built fireplaces as well as brick ones?

Yes. Factory-built units are repaired with the maker's parts, ordered from the model on the rating plate, so the fireplace stays within its listing. Brick fireplaces are repaired with firebrick and refractory mortar to the building code.

Can a smoking fireplace be fixed without rebuilding it?

It can, once the cause is known. A test fire separates a damper problem, a cold flue, a house short of air and an opening too big for the flue, and each has a fix far smaller than a rebuild.

Our Services