Local chimney cap replacement in Sandalwood
One free visit in Sandalwood to measure, then a cap fastened the way its maker specifies by our local crew.
- Family owned and operated
- Free inspection and estimate
- Same-day service available
- Upfront pricing, no hidden fees
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
or call (904) 920-5495
Why Choose Us
Chimney cap specialists who measure in Sandalwood first
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off when you book today
Nests and debris come out before the cap goes on, so nothing is trapped inside the flue.
- Free inspection and estimateWe measure every flue on your Sandalwood chimney at no charge before any cap is ordered.
- Upfront pricing, no hidden feesThe cap model, its metal and the fastening are priced together, so the total is clear.
- Workmanship warrantyOur fitting and fastening carry the workmanship warranty, with the cap maker's terms in writing.
A fireplace that sits unused
An unused fireplace still has an open flue unless something closes it. Rain runs down the inside, the damper rusts in place, and the smoke shelf turns into a nesting ledge for whatever finds it. Where your Sandalwood fireplace rarely sees a fire, a cap is the smallest step that keeps water and animals out while leaving the flue ready for use later. If you would rather seal the flue more tightly than a screened cap allows, a top-sealing damper is the other option we price, and the two can be priced side by side with what each one does. The flue gets measured on the free visit in Sandalwood, before any cap is ordered; call (904) 920-5495.
Sandalwood is one of the named neighborhoods of Jacksonville. Sandalwood is in Duval County.
What's Included
Cap replacement work for Sandalwood homes
- Tile height above the crown checked for a secure fit
- Fasteners in a metal that matches the cap
- Lid or screen that comes off for the sweep
- Crown condition noted under a full-crown cap
How It Works
How chimney cap replacement runs
-
Every flue tile measured
On the free visit we measure each tile inside and out, and how far it stands above the crown.
-
Cap picked from the maker's chart
Model, metal grade and screen come from the sizing chart and our own numbers, never from the old cap.
-
Old cap off, new cap fastened
Set screws, a clamp band or masonry anchors are tightened to the maker's instructions, firm enough for a hard blow without cracking the clay.
-
Screen checked, debris hauled off
We check the mesh along every edge, clear out any nest material, haul away the old cap and show you the finished top.
Local Conditions
Caps on furnace and water heater flues in Sandalwood
When a masonry flue carries exhaust from a furnace or water heater, that appliance's instructions govern what sits on top of it. Some rule out a fine screen.
We read those instructions before capping an appliance flue in Sandalwood.
10% off your first service when you book today
Cap missing or rusted? Book today and save 10% on your first service.
Anchoring a full-crown cap into sound concrete
An outside-mount cap covers the whole crown and fastens down through its own flange or legs into the crown or the top course of brick. The anchors are masonry anchors set into drilled holes, in a metal compatible with the cap so the fasteners do not corrode against it. Their hold depends entirely on what they are set into. Crown concrete that powders when drilled, or edges that are already cracked, will not keep an anchor tight through years of wind load. Testing the crown with the drill before committing to this cap type is part of our visit, and if the concrete fails that test, crown repair is written up as the first line and the cap second.
Hood height and the draft it leaves
The gap between the top of the flue tile and the underside of the cap's hood is the path smoke takes out of the chimney. Too small a gap throttles the flow; too large a gap lets rain blow in under the hood. Cap makers publish the hood height for each model and size, and BIA's residential chimney note advises getting the maker's information on how a cap affects gas flow before choosing one.
We set the cap so the tile top sits within the range the maker gives, measured rather than judged by eye. That measurement is recorded, so if the draft ever changes, the first thing to check is already written down.
Soot-clogged mesh and a lazy fire
Screen mesh sits in the path of every bit of soot and creosote that leaves a wood fire. Over a season the deposit narrows the openings, and a mesh that met the open-area rule when new may fall short. The symptoms show inside the house: a fire that is slow to catch, smoke that curls out at the top of the opening, and a smell of smoke in the room the next day. Brushing the mesh during a sweep clears it. When the mesh size is within the code, a screen that clogs again quickly usually points to how the fires are burned, with wet wood or too little air, rather than to a fault in the cap.
Free Inspection
Tile sizes we take in Sandalwood before ordering
- Height of each tile above the crown, and whether it can hold a cap
- Cap model and maker, chosen from the sizing chart for your tiles
- Metal and grade named: galvanized, a stainless type, or copper
- Access for sweeping: which part lifts off and how it refastens
FAQ
Before a new cap is ordered
Do you replace chimney caps in Sandalwood?
We do. Call or send the form, tell us what you see at the top of the chimney, and we set a time to measure in Sandalwood.
Should the replacement cap match the old one's size?
Only if the old one fit. We size from the tile and crown as they are now, using the maker's chart, and the estimate lists the measurements.
Our Services
More services in Sandalwood
-
-
-
-
-
-
Learn more about chimney cap installation and replacementAll services in Sandalwood
Get your Sandalwood chimney capped properly
Family-owned chimney professionals fit the cap in Sandalwood themselves, and the first look is free.
Free Inspection