Cracked firebox repair in Yulee

The back wall, the side walls and the floor of your Yulee firebox, each checked free and quoted separately.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Firebox specialists who test every brick in Yulee

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

A relining is measured against the firebox depth first, so the fireplace stays within the code.

Free inspection and estimateEvery wall of the firebox in Yulee is tapped and probed cold, and the failed bricks and joints are marked at no charge.
Upfront pricing, no hidden feesEach wall is quoted for what it needs, a few joints, a few bricks or a full reline, so a small repair stays small.
100% satisfaction guaranteedIf a joint we repointed opens again after it has cured and been used as the ticket says, we come back and redo it.

Call (904) 920-5495 Free Inspection

The back wall leans into the room

When the back wall of a firebox bows forward, the problem is bigger than a few joints. The lining has pulled away from the masonry behind it, or the wall itself has moved. Repointing the face of a bowed wall would only hide the movement for a while.

We check how far the wall has moved, whether the masonry behind it is sound and whether the damper frame above is affected, and then write up a relining or a rebuild of that one wall. Back wall bowing in your Yulee firebox? Leave the fireplace unlit and call (904) 920-5495 first.

Yulee is in Nassau County. In the 2020 Census, Yulee counted 14,195 residents.

Firebox work for Yulee fireplaces

Hollow-sounding bricks reset in a full mortar bed
Firebox floor bricks lifted and reset flat
Gaps along the base of the walls repointed
Rumford fireboxes relined to their original angles

Call (904) 920-5495 Free Inspection

How firebox repair runs

Keep the firebox cold
Let the fireplace go unused for several hours ahead of our visit, so each wall is cool to the touch.
Tap, probe and mark
Each brick is sounded, each joint probed, and the failed ones marked and written up by wall.
Rake, rebrick or reline
Joints are raked and repointed, failed bricks replaced and worn walls relined in C199 mortar.
Cure date on the ticket
The mortar maker's drying time sets the date of the first small fire, written down before we leave.

Firebox joints far from the water

Inland in Yulee, the mortar in a firebox fails from heat and age rather than salt. One early sign is sandy grit on the grate or the floor after a fire.

Raking and repointing those joints in medium-duty refractory mortar is often the whole job.

10% off any service booked within 72 hours of inspection

Open firebox joints? The repair you book before three days are out is 10% off.

Call (904) 920-5495 Free Inspection

Reading the label on a tub of fireplace cement

Tubs of premixed fireplace cement are sold for firebrick repair, and their labels are worth a close look. One widely sold premixed refractory cement is rated to 2,000 degrees Fahrenheit and lists ASTM E136, a test of whether a material burns, rather than the C199 pier test. It is also made for joints of a quarter inch or less, with a sixteenth of an inch as its minimum.

A product like that has its place, but it is not automatically the medium-duty mortar R1001.5 calls for between firebricks. We compare each product's stated standard with the code before choosing it for a joint.

Doors, inlets and a hotter firebox

Fireplace doors closed during a fire, or an outside air inlet blowing fast into the firebox, can raise the temperature inside it. The Brick Industry Association warns that higher temperatures of that kind can warp grates and lead to early breakdown of the firebox mortar joints.

When a lining shows wear out of step with its age, we look at how the fireplace is run as well as at the brick. The repair still uses the same firebrick and mortar, but the estimate notes the likely cause so the new joints are not lost the same way. Opening the doors during a fire, or partly closing an inlet, are the usual changes to talk through.

Temperature limits on the day of the repair

Mortar makers set weather limits for their products. One medium-duty refractory mortar is not to be applied when the temperature will drop below 40 degrees Fahrenheit within 48 hours, or onto frozen or frost-filled surfaces.

A firebox sits inside the house, but its masonry is tied to the chimney and cold air can come down the flue on a still night. On a cold day we check the product limits before starting and, where they cannot be met, move the repair to a better day instead of risking joints that do not cure. The ticket records the product and the date it went in.

Checked in Yulee before any brick comes out

Firebox depth measured before any relining is planned
Floor firebricks lifted, rebedded and reset flat
Back wall slope and throat height kept on any rebuild
Water marks traced to their source and listed separately

Before the first fire after a repair

Can you replace just the bad firebricks in Yulee?

Yes. Cracked, hollow or worn-through firebricks come out individually and new ones go in, and the sound bricks around them stay. A full reline is written up only when a whole wall has worn.

Why not fill the cracks and paint over them?

Paint does nothing for the lining and keeps new mortar from bonding. Open joints need raking and refilling, and cracked bricks need replacing, so the repair lasts.