Chimney liner installation in Yulee by local liner pros

Cracked tiles or no liner at all? Local liner pros inspect your Yulee flue free and fit a listed stainless liner sized to the appliance.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Local liner experts for Yulee fireplaces and stoves

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

A liner in Yulee is sized to what burns in the fireplace or stove, never to whatever is in stock.

Free inspection and estimateWe sweep and measure the flue in Yulee at no charge before any liner is ordered.
Upfront pricing, no hidden feesLiner size, alloy, insulation and cap are one written price, set before the order goes in.
Workmanship warrantyHow we install the liner is covered by our workmanship warranty, and the maker's terms come in writing.

Call (904) 920-5495 Free Inspection

Sound tile, wrong size

Relining is not only for broken flues. A clay-tiled flue in good condition can still be the wrong size for what now burns below it, for example when a stove replaces an open fire or a new gas appliance replaces an old one.

In that case the tile stays where it is, and the liner runs inside it at the size the appliance needs. The tile becomes a protective sleeve around the new flue. The sizing is explained to Yulee homeowners so the reason for relining a sound flue is clear. Nothing is broken out that does not need to be. Book the free flue measurement for your Yulee home at (904) 920-5495.

Yulee falls within Nassau County. Yulee had 14,195 residents at the 2020 Census.

A liner job from sweep to cap

Liner diameter taken from the collar or the opening
Stainless alloy picked for the fuel you burn
Round liner pressed oval where the tile is narrow
Screened liner cap fastened at the top plate

Call (904) 920-5495 Free Inspection

How chimney relining runs

Sweep and prove the flue
The flue is swept clean, then a test piece or cone is lowered to make sure the liner will pass every bend.
Size and alloy chosen
The diameter comes from the appliance collar or the fireplace opening, and the alloy from the fuel.
Liner run down and joined
The liner goes down with its insulation where the listing asks, and joins the stove, insert or smoke chamber below.
Top plate, cap and record
The top plate is clamped and sealed, the cap fastened, and you get the installation record.

Short chimneys and liners in Yulee

Liner systems are listed for a range of chimney heights, and a very short chimney may not draw well even when lined.

We measure the height of your Yulee chimney and check it against the liner's listing before ordering.

10% off any service booked within 72 hours of inspection

Relining is a larger job, and it earns the discount just as a sweep does.

Call (904) 920-5495 Free Inspection

Chimney height and the liner listing

Liner systems are listed for a range of chimney heights, and one maker's instructions call for a chimney at least 10 feet high. Below that, the draft a liner can produce may not be enough for the appliance.

The code sets its own height rule at the roof: at least 3 feet above where the chimney passes through, and 2 feet above anything on the building inside a 10-foot radius (FBC R1003.9). Where the chimney meets neither rule, a liner alone does not fix it. A short chimney is pointed out before any liner is priced.

The crown under a new top plate

A top plate sits on the crown and seals to it, so the crown's condition matters to the liner. A crown with open cracks lets water into the masonry around the new flue, and water trapped between old tile and liner can stain the chimney and rust fasteners.

When the crown is sound except for small cracks, a crown sealer before the plate goes on may be enough. When it is broken up or missing its overhang, repair or recasting comes first. Either way the crown work is its own line on the estimate, so the liner price stays the liner price.

The smoke chamber below a fireplace liner

For an open fireplace, the liner's lower end starts above the throat, and the smoke chamber below still has to guide smoke from the wide firebox into the smaller liner opening. That chamber needs sound, reasonably smooth walls to do it.

Stepped brick, open joints or missing mortar in the chamber slow the smoke and let heat into the masonry, and a new liner above does not change that. The relining inspection looks at the chamber for this reason. Where the walls have failed, smoke chamber repair is listed with the liner, so the new flue gets a clean feed from below.