Chimney mortar repair for homes in Yulee
Sandy joints in Yulee rebuilt by hand, head joints chiseled rather than ground, with our workmanship warranty.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Local repointing pros for Yulee chimneys
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Deep joints are filled in layers and tooled, not skimmed over.
- Free inspection and estimateEvery face of your Yulee chimney is scratch-tested and sketched at no charge.
- 100% satisfaction guaranteedIf the new joints are not sound, full and matched as agreed, we come back and fix them.
- Family owned and operatedA family masonry crew does the survey and the work, so the person who priced a face is the one who repoints it.
Staining after an earlier repointing
A chimney repointed carelessly can end up with gray haze and mortar smears across the brick faces. Mortar left to harden on brick is hard to remove without damaging the surface.
Clean work depends on timing: excess mortar is brushed off once it has firmed but before it sets hard. We keep the faces clean as we go, and where old haze is present, we test a small area before any cleaning. Mortar smears on the brick of your chimney in Yulee? Phone (904) 920-5495 for a free look from our masons.
Yulee had 14,195 residents at the 2020 Census. Yulee is an inland community.
Repointing work we do in Yulee
- Head joints cut by hand to protect brick edges
- Deep joints filled in layers, not one pass
- Color matched from a cured sample
- A repointing sketch of your Yulee chimney, free
How chimney tuckpointing runs
-
Every face surveyed
Joints are scratch-tested at several heights and the failed courses marked on a sketch.
-
Joints raked and cleaned
Old mortar comes out to sound depth, head joints by hand, then joints are cleaned and dampened.
-
Filled in layers and tooled
Matched mortar goes in stage by stage, then is tooled to the original profile.
-
Cured and cleaned up
Fresh joints are protected while they cure, the faces brushed and the roof cleared.
Earlier repairs on Yulee chimneys
A patchwork of old repairs is common on chimneys everywhere: caulk here, hard gray mortar there.
In Yulee we sort out which old patches are sound and which have to come out before repointing.
10% off any service booked within 72 hours of inspection
For a home in Yulee with several faces to repoint, every face booked in the 72 hours is discounted.
Cleaning and dampening raked joints
Raking leaves dust and loose grit in the joint, and fresh mortar laid on that grit has nothing firm to hold. So each joint is brushed or blown clean down to firm mortar and brick.
Next the joint is dampened, because dry brick pulls water out of fresh mortar and weakens it. Preservation Brief 2 describes masonry that is damp but without standing water. On a hot day that may mean dampening again just ahead of the trowel. It is a small step that decides whether the new joint bonds or cracks loose. A joint that is still dusty when the trowel arrives is cleaned again, however long it takes.
Curing new joints slowly
Fresh mortar gains strength by curing, and it cures best when it dries slowly. Hot sun, wind and dry brick all pull water out too fast, leaving a weak, powdery surface.
Preservation Brief 2 describes keeping new work damp while it cures. We shade and mist fresh joints as needed and time the work to avoid the harshest part of the day on sun-facing sides. The estimate tells you how long to wait before the chimney is used, based on the mortar and the weather while we work. Curing is not dramatic work, yet it separates joints that stay hard from joints that dust away within a few seasons.
Fixing the water before the joints
Water from above is the main reason chimney mortar breaks down. A cracked chimney top, a missing cap or failed metal at the roof line lets water into the masonry, and new joints below a leak get soaked just like the old ones.
So the survey includes the top of the chimney and where it meets the roof. Anything letting water in is priced alongside the repointing, and we recommend doing those repairs in the same visit or before. That way the new mortar starts its life dry. New joints under a dry top can be expected to wear slowly, the way sound mortar should.
What goes on a repointing sketch in Yulee
- Raking depth for each face, set by joint width
- Loose top courses that need relaying rather than repointing
- Chimney top and roof metal defects priced as separate lines
- Days on site and the wait before the next fire
Before the joints are raked
What if you find loose bricks while raking?
We stop and show you. A loose brick or course needs relaying or replacement, which is priced as its own item before we continue.
What does the repointing survey in Yulee cost?
The survey and estimate are free. Book the repointing within 72 hours of the survey and 10% comes off.
More services in Yulee
-
-
-
-
-
-
Get the joints on your Yulee chimney sound again
Raking and repointing the chimney at your Yulee home is work for our own family masons, after a free survey.
Free Inspection