Chimney damper replacement for Brooklyn homes

Your Brooklyn fireplace gets a damper that opens wide for the fire and shuts snug after it, with our satisfaction guarantee.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Family-owned damper experts serving Brooklyn

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

The damper at your Brooklyn home is diagnosed by the people who will fix it, not passed along.

Free inspection and estimateYour Brooklyn damper is run through its full travel and checked with a light at no charge.
100% satisfaction guaranteedIf the repaired damper does not open fully and close flat, we come back and make it right.
Family owned and operatedA family business does the diagnosis and the repair, so the person who quoted it answers for it.

Call (904) 920-5495 Free Inspection

Rust flakes on the firebox floor

Orange flakes and brown streaks on the firebox floor fall from above, and the first metal over the fire is the damper plate. Rain that falls down a flue with no cap lands on the plate, sits in the frame and rusts both from the top side, where nobody looks.

We grade the metal by how much has flaked away at the pivots and the seating edge. Surface rust cleans off. Metal that has thinned or holed needs a new plate or a new damper, and a cap goes on the estimate so the new one stays dry. Rust dropping into your Brooklyn fireplace? Book a free damper check at (904) 920-5495.

Brooklyn is one of the named neighborhoods of Jacksonville. Brooklyn is in Duval County.

What a damper visit covers in Brooklyn

Warped or holed plates replaced to fit the frame
Rotary cranks and gear drives replaced
Debris cleared off the smoke shelf behind the plate
Cracked or rusted-out frames cut out and replaced

Call (904) 920-5495 Free Inspection

How chimney damper replacement runs

Handle and plate tested
With the fireplace cold, the control is worked through its travel and the plate checked from below with a light.
Failed part named
Pivots, plate, frame or control, the part that failed is written down with the repair options and prices.
Freed, rehung or replaced
Sound parts are cleaned and freed, a plate is matched to its frame, or a new damper is set at code height.
Travel and seal confirmed
The plate must open fully and close flat under the light before the job is done.

Draft through a leaky damper in Brooklyn

A cooled room loses air through a damper that no longer seals, and that happens wherever the house is. Inland or not, the fix starts with the seat and the plate.

On visits in Brooklyn we show you the gaps with a light from below, then price the part that closes them.

10% off any service booked within 72 hours of inspection

A new handle, a rehung plate or a whole new damper, each one comes 10% off.

Call (904) 920-5495 Free Inspection

What sits behind the damper plate

Behind a throat damper is a ledge, the smoke shelf, where anything falling down the flue comes to rest. Mortar crumbs, flakes of rust, leaves and pieces of tile collect there, and a thick pile can wedge the plate when it swings back.

We clear the shelf when the damper is worked on, because a plate freed over a full shelf jams again. What comes off the shelf is worth a look too. Broken flue tile or a lot of mortar sand means damage higher in the chimney, and that is noted for a separate check rather than folded into the damper price.

Using the fireplace while a part is on order

Some damper repairs need a part ordered, a matched plate or a control assembly that fits the frame. Whether a fire can be lit while you wait depends on where the plate is stuck.

A plate held fully open lets a fire burn safely, though room air escapes between fires. A plate stuck closed or partway closed means no fire until the repair is done. Where we can, we leave the plate secured fully open so the fireplace stays usable while the part arrives, and we tell you which situation you are in before we leave the house.

Controls you can reach without leaning in

The code asks that a damper be operable from the room, and in practice that means a handle or crank a person can work without reaching into the firebox. Older installations sometimes put the handle deep inside the opening, where it gets hot and sooty.

When a damper or its control is replaced, the new handle is placed where it can be reached safely at the front of the firebox or through the face. A poker rod gets a clear notch bracket. A crank exits the face at a comfortable height. The small detail decides whether the damper actually gets closed after the fire.

What we measure on dampers in Brooklyn

Damper type identified: throat damper, top seal or factory-built unit
Full travel measured, with where the plate stops and why
Handle positions marked so open and closed are clear
Old parts removed and the firebox cleaned before we leave

Before a damper part is ordered

Why is there a clamp on my damper?

It is probably there for a vented decorative gas appliance, whose instructions require the damper to stay partly open. We leave it while that appliance is installed and remove it only when the fireplace returns to wood.

Does a repaired throat damper seal like a top damper?

Not quite. A throat damper closes metal on metal, while many top dampers close on a gasket. A repaired throat damper still stops the steady draw of an open flue, and we price both when both would work.