Local chimney masonry repair in Brooklyn

Stair-step cracks and sandy joints on a chimney in Brooklyn, inspected free and repaired once the movement has stopped.

Family owned and operated
Free inspection and estimate
Same-day service available
Upfront pricing, no hidden fees

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

or call (904) 920-5495

Why Choose Us

Chimney masonry experts who match the old wall

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off when you book today

Masonry on your Brooklyn chimney is repaired with mortar no harder than the wall, so the brick stays the part that lasts.

Locally owned and operatedA locally owned business answers for the brick and mortar work on your Brooklyn chimney.
Upfront pricing, no hidden feesEach area of the stack is priced on its own line, so you can see what each repair costs.
100% satisfaction guaranteedIf the repair does not look or hold the way we agreed, we come back and make it right.

Call (904) 920-5495 Free Inspection

Stone and veneer chimneys

Not every masonry chimney is brick. Natural stone chimneys are laid in mortar like brick, but their units are irregular and their joints wider. Manufactured stone veneer is a thin facing adhered over a backing and a water-resistive barrier. Loose stones, open joints and stains appear on both, but the repair differs, and the barrier behind the veneer has to stay intact through the repair so water behind the facing can still get out. For a stone chimney in Brooklyn we identify which type it is before quoting, and the details that matter for each type are described on the stone chimney repair page. Describe what you can see from the yard in Brooklyn on the phone at (904) 920-5495.

Brooklyn is one of the named neighborhoods of Jacksonville. Brooklyn falls within Duval County.

What's Included

Brick and mortar repairs for Brooklyn homes

Repointing mortar pre-hydrated and packed in layers
Cured test batch checked against the old color
New joints tooled to the old profile
Fresh joints covered from rain at your Brooklyn home

Call (904) 920-5495 Free Inspection

How It Works

How chimney masonry repair runs

Water path traced first
We check the crown, the cap, the shoulders, the weather side and the flashing before pricing joints or brick.
Joints raked, bad brick cut out
Worn mortar is raked back to sound depth, and cracked or spalled units come out without thinning the wall.
Matched mortar packed and tooled
Pre-hydrated mortar of the type on your estimate goes in, with salvaged or new brick matched for size and color.
Brick cleaned the gentle way
Smears come off with a brush and water while they are fresh, and no harsh acid touches the brick.

Local Conditions

Painted brick chimneys in Brooklyn

Paint on brick slows the escape of moisture. Water that gets in through a crack dries more slowly behind the film, and the face can peel or crumble underneath.

When a painted chimney in Brooklyn needs repair, we explain the options for the coating before any mortar work starts.

10% off your first service when you book today

Loose brick or crumbling mortar? Book today and save 10% on your first service.

Call (904) 920-5495 Free Inspection

Type N, Type S and the stack above the roof

The Brick Industry Association's mortar selection table covers chimneys directly. For parapets and chimneys, which stand exposed above the roof, it recommends Type N mortar and lists Type S as the alternate. Type N is an all-purpose mix with good bond and workability; Type S has higher compressive and flexural bond strength, and masons use the two interchangeably where the job's strength needs are met. What the table does not recommend for an exposed stack are the extremes: the hard, stiff Type M and the soft Type O.

We name the type so another mason could check the choice. A mortar sold as extra strong is not the upgrade it sounds like on a chimney.

Repair mortar no harder than the wall

When new mortar goes into an old wall, it has to work with the brick and mortar already there. BIA's guidance for repointing sets the rule: the compressive strength of the repair mortar should be equal to or less than that of the existing mortar.

A harder repair mix does not share movement with the soft mortar around it. Instead it pushes stress onto the edges of the brick, and BIA names the outcome as spalling. That is why a bag of the strongest mix is not the default choice, and why we look at the existing joints before choosing what goes into them.

Keeping the wall at its code thickness

Florida's residential code sets a minimum thickness for the walls of a masonry chimney: 4 inches nominal, built of solid units or of hollow units grouted solid. That minimum does not relax during a repair.

When a brick is cut out and replaced, the new unit fills the full depth of the old one, and the joints around it are packed full. Thin slips of brick glued to the face, or a pocket left half empty behind a new face, would thin the wall. We cut out and replace full units so the stack keeps its required thickness everywhere we have worked on it.

Free Inspection

Mapped on the brick in Brooklyn

Sand and color match, confirmed with a cured test batch
Joint raking depth and the tool used at the head joints
Source of replacement brick: salvaged from the stack or new
The point where repair gives way to a partial rebuild

FAQ

Before the joints are repointed

Can you repair only the damaged part of the chimney?

Yes, where the rest of the stack is sound. We repair the areas that have failed and close the water path that caused them. The estimate shows each area separately, which makes it clear what is included.

Is repointing the same as masonry repair?

Repointing is one part of it: renewing mortar joints. Masonry repair also covers cracked or flaking brick, loose courses and shoulders, and it may include repointing where the joints need it.

Our Services