
Fireplace repair in Brooklyn by local experts
Refractory mortar, firebrick and maker's parts, used as the code and listings require for Brooklyn fireplaces. The inspection is free.
- Family owned and operated
- Free inspection and estimate
- Same-day service available
- Upfront pricing, no hidden fees
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
or call (904) 920-5495
Why Choose Us
Local fireplace experts for Brooklyn homes
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off when you book today
When a fault makes the fireplace unsafe, it goes at the top of the estimate in plain words.
- Locally owned and operatedA locally owned business shows you the failing part of your Brooklyn fireplace before any price.
- Upfront pricing, no hidden feesSafety repairs come first on the estimate, and items that can wait are priced on their own lines.
- 100% satisfaction guaranteedIf the fireplace still smokes or sticks after the repair we quoted for it, we come back.
Smoke in the living room
Smoke that spills into the room can have more than one cause at once. A damper that opens only part way, a flue that starts cold, a kitchen fan pulling air through the house and an opening too tall for its flue each push smoke out in their own way. A short test fire separates them in the Brooklyn living room: damper position first, then a window cracked open, then the fans switched off. The result points to the fix that matches, whether that is a damper repair, an outside air supply or a metal guard that lowers the opening. We bring the likely parts to the free fireplace check in Brooklyn; call (904) 920-5495.
By straight-line distance, Brooklyn is more than about six miles from the coast. About 6 miles, as the crow flies, separate Brooklyn from Jacksonville.
What's Included
Fireplace repairs for Brooklyn homes
- Masonry or factory-built settled before any part is named
- Damper plate, pivot and handle worked and repaired
- Rusted lintel over the opening checked for movement
- Unsafe items for your Brooklyn fireplace flagged in writing
How It Works
How our fireplace pros repair a fireplace in Brooklyn
-
Masonry or factory-built checked
We read the firebox and the rating plate first, since the answer sets which rules and parts apply.
-
Firebox, damper and hearth tested
Joints are probed, the damper is worked from shut to open, and the hearth and trim distances are measured.
-
Refractory work or listed parts
A masonry firebox gets firebrick and refractory mortar. A factory-built unit gets the maker's parts by model number.
-
Test fire and walk-through
A small test fire shows the draft, and you hear exactly what was fixed.
Local Conditions
What wears out fireplaces in Brooklyn
At more than about six miles from the coast, Brooklyn is far enough inland that salt has little to do with fireplace wear here. Heat does most of it. Firebox joints erode, firebrick cracks, and a damper plate warps over years of fires.
Most of these are small repairs when they are caught early.
10% off your first service when you book today
Ask for the first-service offer and 10% comes off the fireplace work.
Refractory mortar and the bag-mortar mistake
The mortar in a firebox is not the mortar in a brick wall. ASTM C199 covers refractory mortars, and the code calls for the medium-duty grade between firebricks. Ordinary masonry mortar is made to handle weather rather than a fire burning against it hour after hour, and a firebox patched with it breaks down again under the heat. Premixed fireplace patch in a tube has a place for hairline gaps where its maker says so, but a joint that has washed out needs to be raked and refilled. When we open a firebox that has been patched before, the wrong material comes out before the right one goes in.
Raised hearths and the thinner extension
When the floor of the firebox sits at least 8 inches above the hearth extension, the code allows the extension to be thinner: at least 3/8 inch of approved noncombustible material instead of the 2 inches it otherwise requires. That exception is why a raised hearth can carry a thin stone or tile apron. It does not change how far the extension has to reach. A raised hearth that has been lowered, or a room where new flooring has built up the floor level, can take the fireplace out of the exception, so we measure the height as it stands today.
Soot on the brick above the opening
A dark fan of soot on the brick above the opening is a record of smoke spilling out of the fireplace. Cleaning it off is easy, but the stain comes back unless the cause is found. The shape helps. Staining across the full width of the opening points to an opening too tall for its draft, while staining on one side can point to a damper that opens unevenly or a fire built off center. We read the stain, run a test fire to confirm, and the fix for the cause comes with cleaning the face with a cleaner that suits the brick or stone.
Free Inspection
Tested in Brooklyn before a fireplace repair is priced
- Refractory panels ordered by model number from the rating plate
- Outside air inlet screen and damper checked on factory-built units
- Grate size compared with the firebox and the maker's instructions
- Spark screen checked for gaps and replaced with the listed part
FAQ
Before the firebox is opened up
Is refractory mortar really different from regular mortar?
Yes. Refractory mortar is made to take firebox heat, and the code calls for the medium-duty grade under ASTM C199 between firebricks. Regular masonry mortar breaks down when a fire burns against it.
Do you repair factory-built fireplaces as well as brick ones?
Yes. Factory-built units are repaired with the maker's parts, ordered from the model on the rating plate, so the fireplace stays within its listing. Brick fireplaces are repaired with firebrick and refractory mortar to the building code.
Our Services
More services in Brooklyn
-
Gas Fireplace Repair and Service Gas units that will not light, stay lit or burn right, plus service.
-
Chimney Masonry Repair Cracks, open joints and damaged brick repaired with matched mortar.
-
Chimney Sweep and Chimney Cleaning Soot and early creosote brushed out of the flue, smoke chamber and firebox.
-
Gas Fireplace Installation Direct-vent and B-vent gas fireplaces, framed and vented to the manual.
-
Chimney Cap Installation and Replacement Rain, animals and embers kept out of the flue by a fitted cap.
-
Chimney Crown Repair The concrete top of the chimney, sealed or recast so it sheds water again.
Learn more about fireplace repair and serviceAll services in Brooklyn
A safe, working fireplace in Brooklyn
Damper stuck or firebrick cracked in Brooklyn? Our specialist looks at no charge.
Free Inspection