A top sealing damper fitted to your chimney in Switzerland
A handle in the firebox, a lid at the top: Switzerland top dampers fitted, adjusted and explained by local pros.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Local pros who fit chimney top dampers in Switzerland
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
The lid is adjusted until it closes evenly on its gasket.
- Free inspection and estimateYour flue tile in Switzerland is measured and the crown checked on a free visit before any damper is ordered.
- Upfront pricing, no hidden feesThe model, the handle position and any tile or crown work are priced in writing up front.
- 100% satisfaction guaranteedIf the lid does not seal or open the way we showed you, we return and adjust it.
A smoky smell when the fireplace is cold
When a house draws air down the chimney, the air picks up the smell of old soot on the way. With a leaky throat damper, that smell reaches the room even when nobody has had a fire in weeks. The smell can be stronger while exhaust fans are running.
A gasketed top damper stops the air movement at the top of the flue, which stops most of the smell with it. We check the flue and smoke chamber of your fireplace in Switzerland for deposits too, and tell you whether a sweep should come first.
Switzerland falls within St. Johns County. The coastline lies beyond Switzerland.
From the tile measurement to the handle
- Flue tiles measured for the right damper size
- Cables run clean from lid to firebox
- Handle brackets anchored where you can reach them
- Cracked tile rims repaired before fitting
How our crew fits a top damper in Switzerland
-
Tile measured on the roof
The flue tile's outside size, height and rim are checked on a free visit, with the crown around it.
-
Model ordered to fit
The damper is chosen from the maker's size chart for your tile and approved on the estimate first.
-
Frame set, cable run
The frame is set in the maker's adhesive, the old plate made safe and the cable run to the handle.
-
Adjusted and demonstrated
The lid is adjusted to seal, and you try the handle before we leave, with the cure time written down.
Animals and idle flues in Switzerland
An idle flue in Switzerland is shelter for birds and animals whatever the distance to the beach. A closed top damper takes that shelter away.
Anything already in the flue has to be out before the damper goes on.
10% off any service booked within 72 hours of inspection
The damper, the cable and the fitting are all discounted.
Keeping animals out of a closed flue
A closed top damper shuts the flue opening, so birds and animals cannot move in while the fireplace is idle. While the lid stands open during a fire, heat and smoke keep animals away from the flue.
Anything already living in the flue has to be removed before the damper is fitted, and some birds and bats are protected by wildlife rules that set the timing. We check the flue before fitting and tell you if that step comes first. Where the chimney also carries an appliance flue, that flue keeps its own screened cap against animals.
Top dampers and chimney plugs compared
An inflatable plug or a draft stopper closes the flue from below and has to be taken out before a fire. A top damper closes the flue from above and opens with its handle. Either can be left closed by mistake, and neither should be.
A top damper's handle sits in the firebox, where it is hard to miss before lighting, and it seals the whole flue from the weather. We explain both options, and fit the damper where it suits how you use the fireplace. Some owners keep a plug as well as a top damper; the plug still has to come out before a fire.
What the damper estimate lists
Our estimate for a top damper names the model and its size, the tile measurement it is based on, what happens to the old throat damper, the handle position, and any crown or tile repair needed first. Each is priced on its own line.
The damper's cure time and the date it can be used go on the ticket after installation. If the day brings a surprise, such as a cracked tile hidden under the old frame, you see it before we continue. The old throat damper's condition is described too, so you can see why it is being replaced.
What we check before fitting a top damper in Switzerland
- Tile height above the crown checked against the maker's minimum
- Frame set in the maker's adhesive, with the cure time written down
- Cable routed clear of tile joints and old damper edges
- Lid adjusted to close evenly on its gasket
Before the damper is ordered
What if I forget to open it?
The handle hangs in the firebox where it is easy to see, and we show you how to check the lid before lighting. Smoke at the opening is the sign it is closed, so put the fire out and open the damper.
Will it need maintenance?
Very little. The gasket, spring and cable are checked when the chimney is swept, and the maker's parts replace them when they wear.
More services in Switzerland
-
-
-
-
-
-
Learn more about top-sealing damper installationAll services in Switzerland
Measure, order, set, adjust, done
Repair the old damper or seal the top? Our specialists in Switzerland price both when both make sense.
Free Inspection