Family-owned stone chimney repair in Switzerland
A local family business for stone chimneys in Switzerland, with 10% off stone work you book inside three days of the inspection.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Stone repair experts who identify the build first
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Stones reset and replaced on your Switzerland chimney are counted on the ticket.
- Free inspection and estimateWhether your Switzerland chimney is full stone or veneer is settled on a free visit, before any price.
- Upfront pricing, no hidden feesStones, joints and veneer area are priced in writing one line at a time.
- Family owned and operatedOur family-owned masons approve the mortar sample with you before the first joint is filled.
Rust streaks coming out of the stone
Orange streaks leaking from joints in stone veneer can come from metal behind it: corroding lath, ties or fasteners. Rusting metal loses its hold and swells as it rusts, which is how veneer starts to loosen from the inside. Rust stains can also show up at the base, where a corroding screed bleeds onto the stone.
We open a small area on the chimney in Switzerland to see the metal before pricing. If the lath or ties are failing, the estimate covers taking the veneer off that area, replacing the backing and resetting the stone.
The county for Switzerland is St. Johns County. Switzerland does not reach the coast.
From one loose stone to a veneer reinstall
- Base drainage exits opened and restored
- Veneer cut back from the roof surface
- Stone cleaned by tested, gentle methods
- Every stone reset on your Switzerland chimney counted on the ticket
From the first loose stone to the last tooled joint in Switzerland
-
Describe what moved
Tell us what has shifted or fallen, and the free visit comes equipped for it.
-
Build and backing confirmed
Corners, joints and the base show the build, and a loose piece shows what is behind the veneer.
-
Reset, repoint or reinstall
Stones go back on fresh beds, joints fill in layers, and veneer returns to a repaired backing.
-
Matched and cured
An approved mortar sample and the old joint profile guide the finish, and the cure time is written down.
Cleaning an inland stone chimney in Switzerland
Inland in Switzerland, stains on stone come from water, smoke and plant growth rather than salt. Gentle cleaning, tested first, takes most of it off.
If a stain keeps coming back, we look for the water or smoke behind it.
10% off any service booked within 72 hours of inspection
Stone chimney work in Switzerland takes the discount on full stone and veneer alike.
Tooling joints to match
Stone joints are finished in several ways: raked back so the stone edges stand proud, struck flush with the face, weathered at an angle to shed water, or brushed for a rough texture. Each gives the chimney a different look, and a repair in the wrong profile shows from the street.
The existing profile is read before repointing and matched with the right tool at the right moment in the cure. Where the old joints were raked deep enough to hold water on the stone ledges, we tell you, and the estimate offers a profile that sheds water better. A small test area in a spot you choose lets you see the finished profile before the whole run is done.
Taking veneer off and putting it back
When a section of veneer has lost its backing, the fix is to take that section off, repair the water barrier and lath, and set the stones back. Pieces are numbered as they come off where the pattern matters, cleaned of old mortar and reset with the setting mortar their maker specifies, buttered over the whole back.
The edges of the repaired area are feathered into the sound veneer so the joints run through. We price the area in square feet and say how many stones we expect to reuse, since breakage during removal is part of the job. New lath and barrier are lapped into the old ones at the edges of the opening, so water keeps draining the right way.
The cap on top of a stone chimney
The top of a stone chimney follows R1003.9.1 like any masonry chimney: a cap of concrete, metal or stone that slopes water away, overhangs to a drip, and meets the flue liner at a sealed joint that lets the two move apart. A flat mortar wash across the top stones meets none of that.
Water that leaves the top the wrong way runs down the stone and into the joints below. We check the cap on every stone chimney we work on and price crown work separately, in the order that keeps the new stone work dry. A stone cap made from a single slab or a few large pieces also needs a drip edge cut or formed underneath it.
Stone, joints, backing and base, in writing
- Joints raked to sound mortar and filled in layers
- Mortar mix and sand matched, with a cured sample to approve
- Veneer backing opened and checked where bulging or loose
- Cleaning method tested on the stone and named on the ticket
Stone chimney questions from Switzerland
How do I know whether my chimney is full stone or veneer?
The corners, the depth of the joints and the base can show it, and a loose piece shows the backing directly. We confirm it on the free visit and write down how we know.
What happens if a reset stone in Switzerland works loose?
Our satisfaction guarantee covers the stone work we quote. If a stone we reset works loose or the joints we filled fail, we return and redo them.
More services in Switzerland
-
-
-
-
-
-
Learn more about stone chimney repairAll services in Switzerland
Loose stones or failing veneer in Switzerland?
Book the free stone chimney inspection in Switzerland; stone work agreed in the three days after it comes 10% off.
Free Inspection