
Chimney sweep in Switzerland by local pros
Drop cloths down, opening sealed, vacuum running. Your Switzerland chimney sweep leaves the room as it found it, and the inspection is free.
- Family owned and operated
- Free inspection and estimate
- Same-day service available
- Upfront pricing, no hidden fees
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
or call (904) 920-5495
Why Choose Us
Sweep pros who keep Switzerland living rooms clean
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off when you book today
Soot stays inside the firebox during a sweep in Switzerland, because the vacuum works at the sealed opening.
- No hidden feesThe sweep price for your Switzerland fireplace is set before the brush goes in, and it stays that way.
- Same-day service availableA sweep can happen the same day you call, whenever the schedule has an opening.
- 100% satisfaction guaranteedIf the room is not left as clean as we found it, we come back and clean it.
What to tell us when booking a sweep
When you call about a sweep, a few answers shape the visit. Is it an open fireplace, a wood stove or an insert? When was the last fire, and roughly how many fires since the last cleaning? Does the chimney have more than one flue, and can the roof be walked?
Those details decide which rods, heads and ladders come off the truck, and how long to hold on the schedule. Give us the make and model of any stove or insert, because its manual decides whether it comes out. With that, your Switzerland sweep starts on time and ends without a second trip. Fireplace not drawing in Switzerland? Call (904) 920-5495 and book a sweep.
About 14 miles, as the crow flies, separate Switzerland from Jacksonville. Switzerland is in St. Johns County.
What's Included
Sweeping work we handle in Switzerland
- Damper plate and frame cleaned until it seats
- Stainless liners brushed with soft bristles
- Soot bagged and carried out of your Switzerland home
- Written record of what the brushes found in Switzerland
How It Works
How your Switzerland sweep goes
-
Room covered, opening sealed
Drop cloths go down, the fireplace opening is closed off and a filtered vacuum runs at it.
-
Flue brushed with a matched head
Rods carry a brush shaped and sized to your tile or liner up the full height, around any offset.
-
Damper and chamber walls scraped
The sloped walls, the smoke shelf and the damper plate are cleared by hand, with the shelf last.
-
Clean-up and a written note
Debris is bagged and carried out, and you get a note on the deposit and anything the brushes uncovered.
Local Conditions
Nests in Switzerland chimneys
An open flue is a nesting spot for birds and small animals. Chimney swifts nest in masonry flues and are protected while they do.
Before any brush goes into a flue in Switzerland, we check for signs of life, and an active nest waits for its season to end.
10% off your first service when you book today
Call today about chimney sweep in Switzerland and save 10% on your first service.
Why a round brush fails in a square tile
Clay flue tile comes in square and rectangular shapes, and the corners are where deposit sits deepest, because smoke moves slowest there. A round brush in a square tile cleans a circle and leaves four stripes of creosote running the height of the flue.
The answer is a head cut to the tile's shape and size, with bristles long enough to reach into each corner under light pressure. For rectangular tile the head is matched to both dimensions, so it bears on the long walls as well as the short ones. Heads wear down, and a worn head stops reaching the corners, so each one is checked against the tile before the first pass.
Checking for occupants before brushing
A brush pushed into an occupied flue helps nobody. Before any rod goes in, the flue is checked for signs of life: sounds, droppings on the smoke shelf, fresh nesting material.
Federal law, the Migratory Bird Treaty Act, protects chimney swifts, and Florida rules bar excluding bats during their maternity season, so a live occupant can change what is allowed and when. If something is there, the sweep is rescheduled and the animal question handled first. The debris comes out once the flue is empty. The check takes minutes and happens on every sweep, cap or no cap, since a torn screen or a loose cap lets animals in.
Sweeping a metal chimney the maker's way
The chimney on a factory-built fireplace is a stack of listed metal sections, and its maker's manual sets how it may be cleaned, including the brush and the tools to avoid so the inner wall is not dented or a joint pulled apart. The sweep follows that page.
As the brush passes, each section is checked for dents, rust streaks and joints that have separated, and the firestop spacers at each ceiling are looked at where they can be seen. Anything out of order is noted by the maker's part name, since those chimneys are repaired only with listed parts. The cap on top, called a termination in the manuals, is part of the listed system and gets checked the same way.
Free Inspection
Checked during a sweep in Switzerland
- Cap screen cleared of soot and the cap reset square on the flue
- Nesting material and leaves removed once the flue is confirmed empty
- Factory-built chimney brushed with the tool its manual names
- Clean-out door or tee cap emptied at the base of a lined flue
FAQ
Before the brushes go in
Do you sweep chimneys in Switzerland?
We do. Tell us the fireplace type and when it was last used, and we give you a time window for the sweep in Switzerland.
Do you sweep factory-built fireplaces?
Yes, following the maker's manual for the brush and method. Damaged chimney sections are noted by part name, since those units are repaired with the maker's listed parts only.
Our Services
More services in Switzerland
-
Gas Fireplace Installation Direct-vent and B-vent gas fireplaces, framed and vented to the manual.
-
Fireplace Installation New and replacement fireplaces, factory-built or masonry, with their chimneys.
-
Chimney Flashing Repair The metal joint between roof and chimney, re-formed so rain runs past it.
-
Chimney Liner Installation and Relining A listed stainless liner sized to the appliance and run the full flue height.
-
Chimney Cap Installation and Replacement Rain, animals and embers kept out of the flue by a fitted cap.
-
Chimney Rebuild Loose, cracked or leaning masonry taken down to sound brick and relaid.
Learn more about chimney sweep and chimney cleaningAll services in Switzerland
Book a clean flue for your Switzerland fireplace
Our family business sends sweep professionals to your Switzerland fireplace, with the price given before the brush goes in.
Free Inspection