Local chimney crown repair in Switzerland
From crack map to cure time, your Switzerland crown repair is planned by local masons on a free inspection.
- Family owned and operated
- Free inspection and estimate
- Same-day service available
- Upfront pricing, no hidden fees
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
or call (904) 920-5495
Why Choose Us
Crown repair experts for Switzerland chimneys
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off when you book today
Thin mortar washes are replaced with a real cast crown instead of being skimmed over.
- Free inspection and estimateWe map the cracks on your Switzerland crown and check the brick under it at no charge.
- Upfront pricing, no hidden feesCoating and recasting are both priced on paper, so you see the difference before choosing.
- 100% satisfaction guaranteedIf the finished crown is not right, tell us and we come back to put it right.
The brick under the crown
Months of water through a failed crown leave damage in the brick right under it. The top courses stay wettest, so their joints wash out and their faces flake first. Casting a new crown on top of loose or soft brick gives the new concrete a bad base.
Once the old crown is off, the top courses of your Switzerland chimney are checked by hand. Loose brick is relaid and open joints repointed before the forms go up, and that masonry work is priced separately with the reason beside it. Cracks on top of the chimney in Switzerland? Our masons tell you coat or recast after one look, so call (904) 920-5495.
The county for Switzerland is St. Johns County. Switzerland is inland, more than about six miles from the coast.
What's Included
Crown repair jobs we handle in Switzerland
- Failed mortar washes broken out down to sound brick
- Fresh concrete kept damp and covered while it cures
- Chimney cap refastened once the new crown can hold it
- Roof and gutters cleared of crown debris at your Switzerland home
How It Works
Map, prep, coat or pour, cure
-
Crown checked from the roof
We look at the slab, the brick right under it and the seal around each flue, then write down the option that fits with its price.
-
Old top cleaned or torn off
For a coating, the crown is cleaned and the wider cracks filled. For a recast, the old top comes off down to sound brick.
-
Coating brushed on or crown poured
A coating goes on in dry weather inside the maker's temperature range. A recast is formed with a slope, an overhang, a drip groove and a sealed joint at every flue.
-
Curing, then the cap goes back
New concrete stays covered and damp while it cures. The cap is refastened once the crown can hold it, and we show you the finished top.
Local Conditions
Debris that keeps crowns wet in Switzerland
Leaves, grit and green growth on a crown hold rain against the concrete and feed it into every crack. On chimneys in Switzerland we clear the crown at every visit to the roof.
A clean crown also lets us see new cracks early, while a coating can still handle them.
10% off your first service when you book today
A first crown coating or recast with us comes 10% off. Just ask when you call.
Weather windows for a crown coating
A crown coating is only as good as the day it goes on. The coating maker's data sheet sets the rules: a surface and air temperature range, a clean and dry surface, and no rain due before the coating has had time to set, unless the crown can be protected.
That means crown coatings are scheduled for dry spells, and a day that looked fine can be called off if showers move in. We also cool a sun-heated crown with a light mist where the data sheet allows it, since a hot surface can make the coating skin over too fast.
Keeping new concrete damp while it cures
Concrete gains strength through a chemical reaction that needs water, and a crown on a sunny, breezy roof dries out fast. If the surface dries too early, it can craze and dust, and the crown ends up weaker than its mix should give.
After the pour, the crown is covered and kept damp for the curing period the mix calls for, and it is protected from rain until it has set. The forms come off once the concrete can hold its edges. Those steps are why a crown recast can take more than one visit, and you know in advance when each one happens.
Crowns around a stainless liner top plate
After a flue is relined with a stainless steel liner, a top plate sits on the crown and the liner passes through it. The plate is sealed to the crown so water cannot run down between the old flue tile and the new liner.
Repairing the crown on a relined chimney means taking that plate off, repairing or recasting the crown, and resealing the plate to the finished surface with a sealant rated for the job. The liner itself is left undisturbed. If the plate is corroded or the seal has failed repeatedly, that becomes a separate line.
Free Inspection
Coat or recast, and the reasons
- Bond break material around each flue tile
- Chimney cap removal and reinstallation, with how it is fastened
- Rain protection for fresh concrete while it sets
- Other findings on flue tile or brick, listed as separate lines
FAQ
Crown repair questions from Switzerland
Can I tell from the ground whether my crown is a mortar wash?
Sometimes. A thin gray layer that tapers to the edge with no overhang is likely a wash, while a thicker slab that projects past the brick is likely a cast crown. We confirm it from the roof.
Does crown work mean the chimney cap comes off?
For a recast, yes. For a coating, it depends on how the cap is mounted. The estimate says which applies to your chimney.
Our Services
More services in Switzerland
-
-
-
-
-
-
Learn more about chimney crown repairAll services in Switzerland
Seal or recast your crown in Switzerland
Our crown pros map the cracks on your Switzerland chimney and write both options down. Call (904) 920-5495.
Free Inspection