Chimney crown repair in Sawgrass by local masons
From crack map to cure time, your Sawgrass crown repair is planned by local masons on a free inspection.
- Family owned and operated
- Free inspection and estimate
- Same-day service available
- Upfront pricing, no hidden fees
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
or call (904) 920-5495
Why Choose Us
Crown repair specialists who seal or recast in Sawgrass
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off when you book today
Hairline cracks on a sound slab get sealed, which keeps the job smaller and the price lower.
- Free inspection and estimateWe map the cracks on your Sawgrass crown and check the brick under it at no charge.
- Upfront pricing, no hidden feesCoating and recasting are both priced on paper, so you see the difference before choosing.
- 100% satisfaction guaranteedIf the finished crown is not right, tell us and we come back to put it right.
Precast crowns
Precast crowns are made on the ground in a form, cured there, then lifted onto the chimney and set on a mortar bed. The Brick Industry Association's Technical Note 19B rates precast caps as generally performing better than ones cast in place, because a cap made on the ground is easier to make water-resistant.
Precast suits a regular-sized chimney in Sawgrass, and it shortens the time on the roof. Odd-sized stacks, multiple flues or limited access can favor casting in place. We say which method we propose and why. Both routes end with the same overhang, drip groove and bond break. Call (904) 920-5495 with your Sawgrass street, and we will book a dry-weather visit to the crown.
Census takers counted 5,385 people in Sawgrass in 2020. Sawgrass sits on the coastline.
What's Included
Crown repair jobs we handle in Sawgrass
- Flue tiles taped so the coating ends in a clean line
- Loose top courses relaid before the new crown is cast
- Reinforcement placed inside the slab to control cracking
- Coat or recast decision for your Sawgrass crown in writing
How It Works
From crack map to cured crown in Sawgrass
-
Crown checked from the roof
We look at the slab, the brick right under it and the seal around each flue, then write down the option that fits with its price.
-
Old top cleaned or torn off
For a coating, the crown is cleaned and the wider cracks filled. For a recast, the old top comes off down to sound brick.
-
Coating brushed on or crown poured
A coating goes on in dry weather inside the maker's temperature range. A recast is formed with a slope, an overhang, a drip groove and a sealed joint at every flue.
-
Curing, then the cap goes back
New concrete stays covered and damp while it cures. The cap is refastened once the crown can hold it, and we show you the finished top.
Local Conditions
Crown steel by the water in Sawgrass
Sawgrass touches the ocean, and chlorides from salt spray settle on a crown and work into the concrete. When they reach ordinary reinforcing steel, it rusts and swells, and the crown splits from the inside.
Crowns we cast in Sawgrass keep the steel deep inside the slab with full concrete cover, and a crack map at the yearly check shows early if anything is moving.
10% off your first service when you book today
Your first crown repair at an address in Sawgrass gets 10% off when booked today.
Crowns around more than one flue
When a chimney has two or more flues, the crown has to drain between them as well as off the outside edges. The space between flue tiles is a natural low point, and a flat area there will hold water against both tiles.
Each tile needs its own bond break and its own check for height and cracks. Where the tiles are close together, forming the crown between them takes care so the concrete fills fully without voids. A cap that covers several flues sits on the finished crown, and its fastening is planned before the pour. Each flue's findings are recorded separately.
Fastening the cap to a new crown
A chimney cap has to be held down against wind, and how it is held matters to the crown. Screws driven down through the crown make holes that need sealing and can let water into the core of the chimney.
Where the cap design allows, its mount grips the flue tile instead, leaving the concrete with no holes in it. Where a cap must be fixed to the crown, the fasteners go in only after the concrete can take them, into sealed holes, and how the cap is attached is recorded. A cap that has worked loose before is checked for why.
Reinforcing steel in crowns near salt water
Close to the coast, chlorides from salt spray settle on a crown and work into the concrete. When they reach ordinary reinforcing steel, the steel rusts, and rust takes up more room than the steel it came from. The expansion splits the crown from inside, along the line of the bars.
For crowns in this band we keep reinforcement well inside the concrete, choose a dense mix, and consider reinforcement that does not rust where the design allows it. The concrete code, ACI 318, treats chloride exposure as its own durability category, and we build the crown with that exposure in mind.
Free Inspection
Coat or recast, and the reasons
- Crown type found: mortar wash, cast-in-place or precast
- Removal of the failed top down to sound brick
- Reinforcement and concrete mix for a cast crown
- Bond break material around each flue tile
FAQ
Crown repair questions from Sawgrass
When does a crown coating need to be redone?
The coating maker's data sheet gives the guidance, and the yearly check tells us in practice. A coating that has stayed flexible and firmly attached can be left; one that has cracked or peeled is cleaned off and renewed.
Can a drip edge be added to my existing crown?
Not in a way that lasts. A drip edge has to be formed into the underside of an overhang, and a crown without an overhang has nowhere to put one. The fix is a new crown formed wider than the chimney.
Our Services
More services in Sawgrass
-
-
-
-
-
-
Learn more about chimney crown repairAll services in Sawgrass
Cracked crown, free check
Hairline cracks can take a coating, while a broken slab needs a recast. Our masonry experts tell you which one your crown in Sawgrass needs.
Free Inspection