Family-run chimney tuckpointing in Riverside
Your Riverside chimney gets new joints that read as one wall, color checked against a cured sample.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Masons who survey every face first
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
If a joint we repointed in Riverside lets go, the same family crew returns to fix it.
- Free inspection and estimateEvery face of your Riverside chimney is scratch-tested and sketched at no charge.
- 100% satisfaction guaranteedIf the new joints are not sound, full and matched as agreed, we come back and fix them.
- Family owned and operatedA family masonry crew does the survey and the work, so the person who priced a face is the one who repoints it.
A stain that points back to the joints
Ceiling or wall stains near a chimney can come from several places. Open mortar joints are one of them, because water that gets into the wall can travel down inside it and appear far from where it entered.
We check the joints alongside the other water paths, so repointing is not sold as a leak fix when the real source is somewhere else. Where the joints are part of the problem, their repair goes on the estimate with the other items. Water stain near the chimney in Riverside? Call (904) 920-5495 for a free inspection.
Cummer Museum of Art and Gardens can be found in Riverside. Riverside is a neighborhood within the City of Jacksonville.
Repointing work we do in Riverside
- Joints tooled to match and shed water
- Roof and yard protected, debris cleaned up
- Joints on your Riverside chimney priced face by face
- A repointing sketch of your Riverside chimney, free
Survey, rake, fill, tool
-
Every face surveyed
Joints are scratch-tested at several heights and the failed courses marked on a sketch.
-
Joints raked and cleaned
Old mortar comes out to sound depth, head joints by hand, then joints are cleaned and dampened.
-
Filled in layers and tooled
Matched mortar goes in stage by stage, then is tooled to the original profile.
-
Cured and cleaned up
Fresh joints are protected while they cure, the faces brushed and the roof cleared.
Older chimneys and softer brick in Riverside
The age of the chimney, not the town, decides how soft its brick and mortar are. Older chimneys need a softer mortar and gentler raking.
We check the brick on every Riverside chimney before choosing the mix.
10% off any service booked within 72 hours of inspection
Repointing earns the discount whether or not you have used our masons before.
Why a skim coat over joints fails
The quick fix for worn joints is to butter mortar or caulk across them without raking. It looks tidy for a while. But the thin layer sits on top of crumbling mortar and dust, and there is nothing solid behind it to hold.
Within a few seasons it cracks, lifts and falls away, and while it is there it hides how far back the joint has failed. It can also trap water behind it. Where we find a skim or caulk patch, it comes off and the joint behind it is raked and rebuilt properly, and the estimate lists that removal.
Cleaning mortar off the brick faces
Some mortar lands on the brick during repointing. Removed at the right moment, once it has firmed but before it sets hard, it brushes off with a stiff natural bristle brush and leaves no mark.
Left to harden, it has to be scrubbed or washed with cleaners that can stain or etch brick. Preservation Brief 2 warns against harsh cleaning of historic masonry. So we brush the faces as we work, and where an old haze needs cleaning, we test the gentlest method on a small patch first and show you the result. A brick face scarred by aggressive cleaning cannot be put back, which is why the test patch comes first.
Mortar inside the house and attic
The exterior of a chimney gets the attention, but the section inside the house and attic has mortar joints too. There, a failed joint is not only a cosmetic issue, since the chimney wall sits close to the framing.
Where the chimney is visible in the attic or a closet, we check those joints with a light. Sandy or open joints on the interior are repointed with the same care as outside, with the space protected from dust. They are listed separately on the estimate because the access and cleanup are different. Any joint there that looks scorched or blackened is noted for a flue check as well, since it may point to a leak from inside.
Joint findings written down before pricing
- Faces and courses needing repointing, marked on a sketch of the chimney
- Head joints cut by hand, and where a grinder is used
- Chimney top and roof metal defects priced as separate lines
- Roof protection, debris collection and gutter cleanup
Repointing questions from Riverside
Do you repoint chimneys in Riverside?
Yes. Our masons repoint chimneys across Duval County, Riverside included. Mention the sandy sides on the phone, and those faces are surveyed first, at no charge.
What if you find loose bricks while raking?
We stop and show you. A loose brick or course needs relaying or replacement, which is priced as its own item before we continue.
More services in Riverside
-
-
-
-
-
-
Learn more about chimney tuckpointingAll services in Riverside
Repoint a worn chimney in Riverside
Mortar crumbling in Riverside? Tell us which sides at (904) 920-5495, and we start the survey there.
Free Inspection