Recessed electric fireplaces installed in Riverside
A bracket on drywall or a framed recess with trim, Riverside electric fireplace installs are built to the unit's manual.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Local electric fireplace pros for Riverside homes
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Every function is tested with you watching before we call the job finished.
- Free inspection and estimateThe wall and circuit at your Riverside home are checked against the unit's manual at no charge.
- 100% satisfaction guaranteedA unit left crooked, loose or not working to its manual gets a return visit and a fix at no cost.
- Family owned and operatedThe family crew that measures your wall is the one that mounts the unit, so nothing gets lost between visits.
The breaker trips when the heat comes on
The heater in an electric fireplace draws a steady, heavy load, and a circuit already feeding lamps, a television and a space heater can trip when it switches on. The fireplace is fine. The circuit is full. Sometimes the answer is as simple as moving another appliance to a different circuit.
We check what else runs on that circuit and compare it with the unit's rating label. Where the manual or the load calls for a dedicated circuit, an electrician adds one and it is priced as its own line. Breaker tripping with a new fireplace in Riverside? Phone (904) 920-5495, and the circuit check is free.
The coastline lies beyond Riverside. Cummer Museum of Art and Gardens lies within Riverside.
Mount, frame, insert, test
- Recessed openings framed to the manual's rough size
- Rating label checked against the circuit
- Electrician work planned and listed separately
- Trim fitted and airflow paths kept clear
How our installers fit an electric fireplace in Riverside
-
Manual read in advance
Send the model number, and the installation section is read before we arrive.
-
Wall and circuit checked
Studs, wall contents, clearances and the circuit are checked against the manual.
-
Mounted, framed or inserted
The unit is hung, set into a framed recess or placed in a prepared firebox, with electrician work done in sequence.
-
Tested and handed over
Flame, heat, remote and cycling are tested with you, and the controls explained.
Replacing old electric units in Riverside
Older electric fireplaces wear out, and new models rarely match their size or mounting.
We measure the old install in Riverside against the new unit's manual and price any changes.
10% off any service booked within 72 hours of inspection
A wall-hung unit or an electric insert, either install comes 10% off.
Hanging a wall-mounted unit level
A wall-mounted electric fireplace hangs on a bracket supplied with the unit. The manual says how that bracket must be fastened, usually into studs or with anchors it approves, and the unit's weight decides how much holding power is needed.
We find the studs, mark the height you want within the manual's clearances, and fasten the bracket level. The unit is hung, checked for level again and secured as the manual shows. A fireplace that tilts even slightly shows it in the flame effect, so level is checked at more than one point. We also check the wall surface for flatness, since a bowed wall can leave a gap behind one side of the unit.
Shelves and mantels over the heater
A shelf or mantel above an electric fireplace is a common wish, and the manual sets how far above the heater outlet it must sit and how far it may project. Warm air rising from the outlet is the reason.
We mark the minimum height on the wall during the install, so anyone adding a shelf later knows where it may go. Building mantels is not part of our installation work. What we make sure of is that the fireplace is placed so a shelf can be added within the manual's limits if you want one. The height is marked lightly so it can be painted over once you have made your plans.
Testing everything before we leave
An installation is finished when the unit works as the manual says. We run the flame effect through its settings, run the heater long enough to watch it cycle, test the remote and thermostat and confirm the unit is secure and level.
For inserts, we check that the flue closure holds and the trim sits tight. For recessed units, we check the trim gaps and the airflow paths. You see each test, and any fault is dealt with before we pack up. The manual and any warranty card from the maker stay with you. We also show you how to switch the unit off completely for cleaning or a long absence.
What we check on the wall in Riverside
- Installation method: wall mount, framed recess or firebox insert
- Electrician work listed apart: circuits, outlets, hardwired connections
- Heater outlet clearances marked for shelves and screens
- Old unit removed and hauled away, where one is replaced
Before the unit goes in
Can you install a unit I already bought?
Yes. Many of our installs are units the owner has chosen. The model number tells us what the manual requires, so share it before the visit.
Can the fireplace go on the same wall as my television?
Often, within the clearances the manual gives for objects near the heater outlet. We check which way your model blows its heat and lay out the wall so both fit.
More services in Riverside
-
-
-
-
-
-
Learn more about electric fireplace installationAll services in Riverside
An electric fireplace set flush on your Riverside wall
Mounting, framing or inserting your electric fireplace in Riverside is done by our own family crew, after a free first visit.
Free Inspection