Local chimney repointing in Oceanway
A free survey of every face in Oceanway, same day if the calendar allows, and 10% off repointing you book within 72 hours.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Family-owned mortar specialists serving Oceanway
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
If a joint we repointed in Oceanway lets go, the same family crew returns to fix it.
- Free inspection and estimateEvery face of your Oceanway chimney is scratch-tested and sketched at no charge.
- 100% satisfaction guaranteedIf the new joints are not sound, full and matched as agreed, we come back and fix them.
- Family owned and operatedA family masonry crew does the survey and the work, so the person who priced a face is the one who repoints it.
Worn joints only near the top
The courses near the top of a chimney stand above the roof on all sides, exposed to every direction of rain and sun. It is common for their joints to wear well before those lower down.
When the damage stops a few courses below the top, repointing only those courses is a fair repair. We scratch-test the lower rows to be sure, and the quote covers only the courses that need it. Worn mortar at the top of your Oceanway chimney? Call (904) 920-5495 and our masons will map it for free.
Oceanway is inland. Oceanway is a neighborhood inside Jacksonville city limits.
Raked, filled, tooled and cured
- Every face scratch-tested and sketched
- Mortar type chosen to suit the brick
- Brick faces brushed clean as we go
- Joints on your Oceanway chimney priced face by face
From the scratch test to cured joints in Oceanway
-
Every face surveyed
Joints are scratch-tested at several heights and the failed courses marked on a sketch.
-
Joints raked and cleaned
Old mortar comes out to sound depth, head joints by hand, then joints are cleaned and dampened.
-
Filled in layers and tooled
Matched mortar goes in stage by stage, then is tooled to the original profile.
-
Cured and cleaned up
Fresh joints are protected while they cure, the faces brushed and the roof cleared.
Settling and stair-step cracks in Oceanway
Stair-step cracks through the joints come from movement, and the cause is in the chimney's footing, not the town.
In Oceanway we check whether the chimney is still moving before repointing a crack like that.
10% off any service booked within 72 hours of inspection
Sandy joints? Book the repointing within 72 hours of the survey and 10% comes off.
Keeping the original joint width
New joints should be the width of the old ones. A joint widened by a careless grinder or a chipped brick edge shows as a thick line of mortar, and the wider joint carries more of the wall's movement than it was designed to.
Preservation Brief 2 treats keeping the original width as part of a good repointing job. We cut inside the old mortar, stop at the brick edge and repair any chipped edge before filling. Where earlier work has already widened joints, we note it and fill them neatly rather than making them wider still.
Why a skim coat over joints fails
The quick fix for worn joints is to butter mortar or caulk across them without raking. It looks tidy for a while. But the thin layer sits on top of crumbling mortar and dust, and there is nothing solid behind it to hold.
Within a few seasons it cracks, lifts and falls away, and while it is there it hides how far back the joint has failed. It can also trap water behind it. Where we find a skim or caulk patch, it comes off and the joint behind it is raked and rebuilt properly, and the estimate lists that removal.
Stair-step cracks mean movement, not wear
Zigzag cracking that steps through the joints usually means the masonry has moved: a footing settled, the chimney shifted or something pushed against it. Repointing that crack fills it, but it does not stop the movement.
When we see a stair-step crack, the cause gets checked before any tuckpointing is priced. A stable chimney with an old crack may need nothing more than repointing. If it is still moving, the structure is dealt with first, and the quote shows the two jobs on separate lines.
Joint findings written down before pricing
- Mortar type under ASTM C270 and the reason for it
- Spalled or cracked bricks to replace before their joints
- Days on site and the wait before the next fire
- Joints that can wait a season, and how to watch them
Repointing questions from Oceanway
Do you repoint chimneys in Oceanway?
Yes. Our masons repoint chimneys across Duval County, Oceanway included. Mention the sandy sides on the phone, and those faces are surveyed first, at no charge.
How close will the new mortar color be?
A sample batch is mixed, cured beside your brick and checked in daylight before any joint is filled. New joints can still look slightly fresher at first, and we show you the sample so you know what to expect.
More services in Oceanway
-
-
-
-
-
-
Learn more about chimney tuckpointingAll services in Oceanway
Book a joint survey before the next storm
From a few top courses to the whole stack, repointing in Oceanway is priced face by face before work begins.
Free Inspection