Recessed electric fireplaces installed in Neptune Beach

A flush, level, working electric fireplace in your Neptune Beach room, installed under our 100% satisfaction guarantee.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Installers who read the manual first

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

Electrician work is named and priced apart, so you see exactly who does what.

Free inspection and estimateThe wall and circuit at your Neptune Beach home are checked against the unit's manual at no charge.
100% satisfaction guaranteedA unit left crooked, loose or not working to its manual gets a return visit and a fix at no cost.
Family owned and operatedThe family crew that measures your wall is the one that mounts the unit, so nothing gets lost between visits.

Call (904) 920-5495 Free Inspection

Retiring a fireplace you no longer burn

A masonry fireplace that has not seen a fire in years can hold an electric insert instead. The insert slides into the opening, plugs in as its manual directs and gives the room a flame effect and heat at the push of a button. The insert's trim is chosen to cover the gap between the unit and the old fireplace face.

First the firebox gets cleaned out, the chimney above is shut off so air and damp stay out, and the opening is measured against the insert's size range. Ready to convert an old fireplace in Neptune Beach? Phone (904) 920-5495, and our family crew will check the firebox for free.

Neptune Beach is part of Duval County. The 2020 Census count for Neptune Beach was 7,217 people.

Mount, frame, insert, test

Inserts set into a cleaned, closed-off firebox
Old units removed and hauled away
Heater run and cycle checked before we leave
Manual read before the first visit

Call (904) 920-5495 Free Inspection

How electric fireplace installation runs

Manual read in advance
Send the model number, and the installation section is read before we arrive.
Wall and circuit checked
Studs, wall contents, clearances and the circuit are checked against the manual.
Mounted, framed or inserted
The unit is hung, set into a framed recess or placed in a prepared firebox, with electrician work done in sequence.
Tested and handed over
Flame, heat, remote and cycling are tested with you, and the controls explained.

The retired chimney above an insert in Neptune Beach

An electric insert leaves the chimney above it idle, but on the coast its cap still faces salt air and storm wind. A rusted cap lets rain in toward the insert below.

When we install an insert in Neptune Beach, the cap is checked and a stainless one priced where the old one has failed.

10% off any service booked within 72 hours of inspection

Mounting, trim and the finish around the unit are all discounted.

Call (904) 920-5495 Free Inspection

Hanging a wall-mounted unit level

A wall-mounted electric fireplace hangs on a bracket supplied with the unit. The manual says how that bracket must be fastened, usually into studs or with anchors it approves, and the unit's weight decides how much holding power is needed.

We find the studs, mark the height you want within the manual's clearances, and fasten the bracket level. The unit is hung, checked for level again and secured as the manual shows. A fireplace that tilts even slightly shows it in the flame effect, so level is checked at more than one point. We also check the wall surface for flatness, since a bowed wall can leave a gap behind one side of the unit.

Placing a fireplace near a television

Many rooms put the fireplace and the television on the same wall. Electric units make that simpler because there is no flue or combustion heat, but the heater outlet still pushes out warm air, and the manual lists clearances for objects above or below it.

We check which way your model's heater blows and how far any screen must sit from it, then lay out the wall with both in mind. Cords for both are planned together so neither shows. Where a model directs heat upward, the layout usually puts the screen at a height the manual allows. Screens are sensitive to heat, so we take the manual's clearance as a minimum rather than a target.

Who does which part of the job

Two trades often share an electric fireplace install. We do the mounting, framing, flue closure, cord routing and trim. An electrician does new circuits, new outlets and hardwired connections under NFPA 70.

The estimate lists both parts and the order they happen in, so nobody waits on anyone else. We share the unit's manual and the planned position with the electrician, and we coordinate the dates. You deal with us for the whole job, with the electrician's work clearly named. If a permit or inspection applies to the electrical work, that sits with the electrician's part of the job.

What we check on the wall in Neptune Beach

Rough opening and clearances taken from the unit's manual
Electrician work listed apart: circuits, outlets, hardwired connections
Trim supplied with the unit fitted and gaps checked
Cleanup of dust and packaging before we leave

Before the unit goes in

Can an electric insert go into my old wood fireplace?

Usually, if the opening falls within the insert's size range. We clean the firebox, shut the chimney off above it, set the insert and run the cord tidily.

Do you charge for the first visit in Neptune Beach?

No. The first visit to check the wall and circuit is free, and the install is priced line by line. Book it within 72 hours of that visit, and 10% comes off.