Fireplace damper repair for Neptune Beach fireplaces

A stripped crank, a warped plate or a frame rusted through, our family crew in Neptune Beach matches the fix to the part that failed.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Family-owned damper experts serving Neptune Beach

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

Replacement plates are matched to your frame by measurement, so they swing and seat properly.

Free inspection and estimateYour Neptune Beach damper is run through its full travel and checked with a light at no charge.
100% satisfaction guaranteedIf the repaired damper does not open fully and close flat, we come back and make it right.
Family owned and operatedA family business does the diagnosis and the repair, so the person who quoted it answers for it.

Call (904) 920-5495 Free Inspection

A crank that turns and turns

Rotary damper controls pass a crank through the face of the fireplace to a gear or threaded rod at the plate. When the crank spins without resistance, the gear has stripped, the rod has broken or the coupling between them has slipped.

The plate can be left in any position when that happens, so we check where it sits before anything else. Replacement control assemblies are made to fit the frame they drive, and we match yours by measuring the frame and the crank location. Crank spinning free on your fireplace in Neptune Beach? Call (904) 920-5495 and our damper specialists will diagnose it at no charge.

The county for Neptune Beach is Duval County. At the 2020 Census, Neptune Beach was home to 7,217 people.

Plate, frame, pivots and control

Seized plates freed and pivots worked loose
Debris cleared off the smoke shelf behind the plate
Cracked or rusted-out frames cut out and replaced
Top seal priced where a throat swap is impractical

Call (904) 920-5495 Free Inspection

Test, free, match, seal

Handle and plate tested
With the fireplace cold, the control is worked through its travel and the plate checked from below with a light.
Failed part named
Pivots, plate, frame or control, the part that failed is written down with the repair options and prices.
Freed, rehung or replaced
Sound parts are cleaned and freed, a plate is matched to its frame, or a new damper is set at code height.
Travel and seal confirmed
The plate must open fully and close flat under the light before the job is done.

Damper rust at the edge of the ocean in Neptune Beach

Neptune Beach sits on the coast, and moist air carrying chloride speeds up rust on bare iron. A damper plate below an open flue meets that air and any rain that falls straight down.

On dampers in Neptune Beach we look hard at the top face and the pivots, and a cap over the flue goes on the estimate when there is none.

10% off any service booked within 72 hours of inspection

The damper visit in Neptune Beach costs nothing, and a repair booked in the 72 hours after it is 10% off.

Call (904) 920-5495 Free Inspection

Matching a new plate to an old frame

A plate fits a frame by its outside size, the spacing and style of its pivots, and the position of the lug where the handle attaches. Two frames that look alike from the room can differ on any of these.

We measure the frame and the old plate on the inspection and match against what is still made. Some frames have a plate available and the job stays small. Others were made by companies that are gone, and a new plate would have to be adapted, which rarely seals well. In that case we price a new damper or a top seal instead, and say why.

When a top seal beats a new throat damper

Mounted on the last flue tile, a top-sealing damper closes with a lid held shut by a cable anchored inside the firebox. It avoids cutting a rusted frame out of the throat, and many models close on a gasket.

It is a separate job with its own parts, and it suits some chimneys better than others, depending on the flue top and how the fireplace is used. When a throat damper replacement would disturb a lot of masonry, we price the top seal beside it so you can compare. The old throat plate is then fixed open or removed, as the top damper's maker directs.

Damper rust close to the ocean

Chloride carried in moist air is one of the factors the corrosion standard ISO 9223 uses to rate how aggressive an atmosphere is to metal, and bare iron rusts faster where chloride deposits keep it damp. A damper plate sits in the path of whatever air and rain come down an uncapped flue.

For chimneys near the coast we check the top side of the plate and the pivots closely, since that is where rust starts unseen. A cap over the flue and a damper kept closed between fires cut the wet air reaching the metal. A replacement plate is still cast iron or steel, as the code requires, so keeping it dry matters more than the metal chosen.

Damper findings written down before pricing

Control checked: poker rod, notch bracket or rotary crank and gear
Frame replacement scope: firebrick disturbed and refractory mortar used
Any damper clamp for a decorative appliance recorded and left in place
Handle positions marked so open and closed are clear

Damper questions from Neptune Beach homeowners

Do you repair fireplace dampers in Neptune Beach?

Yes. Our crew frees, rehangs and replaces throat dampers across Duval County, Neptune Beach included. Describe what the handle does when you call, and the right parts come along to the free inspection.

Does a repaired throat damper seal like a top damper?

Not quite. A throat damper closes metal on metal, while many top dampers close on a gasket. A repaired throat damper still stops the steady draw of an open flue, and we price both when both would work.