
Chimney inspection in Neptune Beach by local experts
Findings shown to you on site in Neptune Beach, sorted by how soon they matter, and the inspection itself is free.
- Family owned and operated
- Free inspection and estimate
- Same-day service available
- Upfront pricing, no hidden fees
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
or call (904) 920-5495
Why Choose Us
Local inspection experts for Neptune Beach homes
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off when you book today
Buying or selling in Neptune Beach? We plan the inspection around the closing date.
- Free inspection and estimateThe chimney inspection at your Neptune Beach home costs nothing, and a clean result is reported as clean.
- Locally owned and operatedA locally owned business shows you what it sees, so the findings are yours to check.
- No hidden feesAny repair that comes out of the inspection gets its own line and price before you decide.
Why findings are explained at the chimney
A written line such as 'crown cracked at the northeast corner' means more once you have seen the crack. So the findings are explained where they are: at the firebox with a light on the back wall, in the attic beside the stack, or from the roof edge where it can be reached safely.
You can ask questions while the thing in question is in front of you, and the written estimate that follows uses the same words you heard on site. Nothing on it should surprise you after the Neptune Beach visit. If you cannot be there, the walk-through can happen by phone before the estimate is sent. A free chimney inspection in Neptune Beach is one call away at (904) 920-5495.
Neptune Beach falls within Duval County. In the 2020 Census, Neptune Beach counted 7,217 residents.
What's Included
The whole system, firebox to cap
- Hearth extension measured against the opening
- Deposit in the flue graded
- Brick and joints above the roofline looked over
- Factory-built units checked against their listing label
How It Works
How your Neptune Beach inspection runs
-
Firebox, damper and throat first
We start where the fire sits, checking the firebrick, the hearth, the damper and the chamber above it.
-
Flue checked end to end
A strong light and a mirror from below, and a look from the top where footing is safe, show the full run of tile.
-
Clearances, attic and roof
Gaps to framing are measured where we can reach them, then the crown, cap, flashing and height are checked up top.
-
Findings shown, repairs ranked
You see each finding on site, and any repair goes on a written estimate ranked by how soon it matters.
Local Conditions
White deposits on coastal brick in Neptune Beach
A white bloom on chimney brick is salt left by water drying at the face. Near the ocean some of it may ride in on the rain, but a bloom that keeps coming means water is moving through the masonry.
The inspection in Neptune Beach notes where the bloom sits, since it points toward the leak.
10% off your first service when you book today
Inspection first, then 10% off your first repair when you book today.
Grading what is in the flue
Freedom from deposits is one of the three things NFPA 211 asks the yearly inspection to confirm, so the deposit is graded as well as noticed. Dry soot is normal after use. Crunchy, flaky creosote means the flue is due for brushing. A shiny, tar-like glaze means a brush will not remove it, and the fireplace should rest until it is dealt with.
The grade and the location, smoke chamber, lower flue or top, both go into the findings, because they show how the fires have been burning as well as what the flue needs. A sweep follows when the grade calls for one, and the findings say so.
Flue size measured against the fireplace opening
An open masonry fireplace needs a flue big enough to carry away what its opening produces. The code ties the two together: a round flue at least one-twelfth the area of the opening, a square one at least one-tenth (FBC R1003.15.1). The inspection measures the opening's width and height and the flue's inside dimensions, then does the arithmetic.
A flue that comes up short explains smoke rolling out at the top of the opening. One far too large for a stove later set into the fireplace explains heavy deposit. Either result goes into the findings with the numbers. The measurements are kept, so any later liner estimate starts from them.
Refractory panels in a factory-built firebox
Instead of firebrick, a factory-built fireplace lines its firebox with refractory panels. They crack with heat over time, and the maker's manual sets the limit for replacement, by the crack's width or by whether a piece has come loose. The inspection compares what it sees with that limit.
Panels that have crumbled at the edges, or that show the metal behind them, are marked urgent, since the steel shell of the firebox is not meant to take the fire directly. Replacement panels come from the maker's own parts list for that model, and each one is listed by its part name. Panels are checked with the unit cold and the grate out.
Free Inspection
Checked on every inspection in Neptune Beach
- Flue tiles and joints viewed from both ends where access allows
- Flue area compared with the fireplace opening or the appliance connector
- Cap fit, fasteners and screen condition checked on each flue
- Chimney height measured against any roof or wall within 10 feet
FAQ
Before your chimney is inspected
Will you need to get into the attic?
If the chimney passes through an attic, yes, because the attic is where clearances to framing and fireblocking can be seen. If there is no safe access, the findings say what could not be checked.
Can you inspect the top if the roof is not walkable?
Yes. The top is examined from a ladder at the eave or from the ground with good optics. The findings say which parts were seen close up and which were not, so nothing is guessed at.
Our Services
More services in Neptune Beach
-
Chimney Liner Installation and Relining A listed stainless liner sized to the appliance and run the full flue height.
-
Chimney Repair Any failed part of the chimney, found, named and fixed in a sensible order.
-
Chimney Sweep and Chimney Cleaning Soot and early creosote brushed out of the flue, smoke chamber and firebox.
-
Chimney Crown Repair The concrete top of the chimney, sealed or recast so it sheds water again.
-
Chimney Masonry Repair Cracks, open joints and damaged brick repaired with matched mortar.
-
Chimney Leak Repair Water coming in at the chimney, traced by testing and stopped where it enters.
Learn more about chimney and fireplace inspectionAll services in Neptune Beach
Get your Neptune Beach chimney checked end to end
A local inspection specialist walks you through what your Neptune Beach chimney needs, and what it does not.
Free Inspection