Local hearth tile and slab repair in Lakeside

An extension too small for the opening gets measured to code in Lakeside and priced on a free inspection.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Local hearth repair pros for Lakeside homes

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

Stone and tile go down on full beds, which is why they stay solid under a tap.

Free inspection and estimateYour hearth in Lakeside is sounded, leveled and measured on a free visit before any price is written.
100% satisfaction guaranteedA tile or stone we set that comes loose is ours to fix, and we return to reset it.
Family owned and operatedA family-owned local crew explains each layer of the repair, from the support to the grout line.

Call (904) 920-5495 Free Inspection

Checking the hearth before an insert goes in

A wood insert set into a masonry fireplace brings its own manual, and that manual sets the floor protection in front of the unit. It can ask for a deeper extension, or a stated insulating value, that the existing hearth does not meet. Checking that before the insert arrives saves a second job.

If you are planning an insert for your fireplace in Lakeside, we measure the hearth against the insert's manual and the code on the same free visit, and price any extension work on its own line.

Lakeside sits away from the coastline. Lakeside sits in Clay County.

Hearth repair work we take on in Lakeside

Sunken or tilted extensions leveled on new support
Stone slabs rebedded, glued or replaced
Crumbling grout raked out and renewed
Your hearth in Lakeside measured and sketched before work

Call (904) 920-5495 Free Inspection

Sound, measure, rebed, cure

Describe the hearth on the call
Cracked, hollow, sunken or too small, a short description sets up the free visit and what we bring.
Sounding and measuring
Each tile is tapped, the slab's level is read and the extension is measured against the opening.
Support first, surface second
A moving slab or missing support is fixed before tile or stone goes back on a full bed of the named mortar.
Cured before heat, then handed back
The bed cures before grout and fire, and we show you the finished edge and where the clear zone ends.

Plain steel parts at an inland hearth in Lakeside

Inland, as Lakeside is, the cast-iron and steel parts of a hearth are not fighting salt air. They still rust where water from the flue sits on them, and a lid that stays damp swells with rust until it will not seat.

The ash dump lid and the screen track are checked for water marks, and we refit the parts so they close.

10% off any service booked within 72 hours of inspection

Tile, stone or slab, hearth repair in Lakeside comes 10% off.

Call (904) 920-5495 Free Inspection

Grout that suits the joint and the heat

Hearth grout joints do more than fill space. They lock the edges of each tile, keep water and ash out of the bed, and take the small movement between units. Joint width follows the tile, with sanded grout for wider joints and unsanded for tight ones, as grout makers describe their products.

Epoxy grouts resist stains but list a service temperature limit on their data sheets, so they are chosen with the distance from the opening in mind. Near the firebox we reach for a cementitious grout, sealed where its maker allows. The color is matched from a cured sample, since wet grout dries lighter.

Keeping the ember zone clear

The extension exists to catch sparks, embers and a rolling log on a floor that will not burn. A rug, a wood box or a stack of newspaper set on it puts fuel back in that zone. Fireplace screens and doors help, but they do not change what the floor in front is for.

At the walk-through we point out the full required extension so you can see where the clear zone ends. Tools with wooden handles and a log holder belong beside it rather than on it. A strip of painter's tape along the line for the first few fires helps everyone in the house learn it.

Resetting an ash dump frame

An ash dump is a cast-iron frame and lid set in the inner hearth, with a pit or chute below. The frame is held by mortar, and heat and ash loosen it over time. A loose frame rocks, lets the lid sit crooked and leaves an open seam at its edge.

We chip the frame loose, clean the seat and reset it in refractory mortar, or fit a new frame and lid if the old ones are cracked. The cleanout door at the base of the pit gets checked too, since a door that will not close lets air and pests in. Both parts are priced separately.