Local chimney masonry repair for Lakeside homes

Stair-step cracks and sandy joints on a chimney in Lakeside, inspected free and repaired once the movement has stopped.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Brick and mortar pros for Lakeside chimneys

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

Masonry on your Lakeside chimney is repaired with mortar no harder than the wall, so the brick stays the part that lasts.

Locally ownedA locally owned business answers for the brick and mortar work on your Lakeside chimney.
Upfront pricing, no hidden feesEach area of the stack is priced on its own line, so you can see what each repair costs.
100% satisfaction guaranteedIf the repair does not look or hold the way we agreed, we come back and make it right.

Call (904) 920-5495 Free Inspection

Deciding between repair and rebuild

Repair makes sense while damage is scattered across a sound stack. It stops making sense when no sound mortar is left behind the face, the top courses rock under a hand on every face, or the flue tiles stand loose inside a stack that no longer holds them. At that point the better repair is to take the upper courses down and lay them again. We write the reasons for the call on the estimate, and when both options are close, we price both, so the decision for your Lakeside chimney is made with the evidence on the page rather than on a hunch from the driveway. Loose brick or crumbling joints in Lakeside? Ask for mortar samples when you call (904) 920-5495.

Lakeside is an inland community. Lakeside is in Clay County.

Mortar, brick and the water behind them

Mortar type picked to be no harder than the wall
Cured test batch checked against the old color
Salvaged or matched brick sized to the old coursing
Mortar smears cleaned off without raw acid

Call (904) 920-5495 Free Inspection

How our masonry specialists repair a chimney in Lakeside

Damage mapped by type
Soft joints, cracks, flaking faces and loose courses are marked on the stack, along with the water path behind them.
Mortar and brick matched
The mortar type is picked to suit the old wall, a test batch cures against the brick, and replacement units are sized to the coursing.
Rake, repoint and replace
Joints are raked to sound mortar and packed in layers, and damaged brick is cut out and reset.
Tooling, cleanup and cover
New joints are tooled to the old profile, smears come off without raw acid, and fresh work is covered from rain.

Curing fresh mortar in Lakeside

New mortar needs time to cure, and a heavy shower on a fresh joint can wash its surface out. Hot sun can dry it too fast.

We cover finished work in Lakeside at the end of each day and schedule around rain on the forecast.

10% off any service booked within 72 hours of inspection

Brick, block or stucco over masonry, the discount covers the repair either way.

Call (904) 920-5495 Free Inspection

Matching brick size to the old coursing

Brick sizes have changed over the years, and a modern unit may be slightly longer, shorter or thicker than the brick in an older chimney. A mismatch of even a fraction of an inch shows as joints that do not line up with the courses beside them.

Before ordering, we measure several existing units and the joint widths, and match both. If a close size cannot be found new, salvaged brick of the right size is an option. We name the brick we plan to use and where it comes from, so the match is agreed before work begins. Where a perfect match is not possible, the closest brick is placed where it shows least.

The key test for soft mortar

A house key or a small screwdriver is enough to test a mortar joint. Drag it along the joint with firm pressure. Sound mortar resists and leaves a shallow scratch; spent mortar crumbles, and sand runs out onto your hand. The test is useful from inside an attic or at the base of a chimney you can reach safely.

Joints that fail it need raking and repointing, and the pattern of where they fail, all over or just on one face or near the top, tells us where water has been getting in. Telling us what you found when you call helps us plan the visit.

Brick under paint or a coating

Paint and some coatings on brick form a film that slows the escape of moisture. Water that gets into the brick through a crack or open joint then dries out more slowly behind the film, and the face can peel, blister or crumble under it.

When we repair a painted chimney, the damaged area is opened up, the brick and joints are repaired, and the question of the coating is raised with you. Repainting over the repair seals the same problem back in, so options such as removing the coating are laid out for you to decide on. If the coating stays, the repair is primed and painted only once the new mortar has cured.

Mapped on the brick in Lakeside

Map of each damaged area on the stack, with its size
Crack readings: width, direction, and whether it is still moving
Shoulder and wash condition, with the repair for each
Roof protection, ladder or scaffold access, and clean-up

Before the joints are repointed

My Lakeside chimney has loose brick. Can you help?

Yes. Masonry repair is part of our work in Lakeside, and a visit starts with a look at every face of the stack. Book by phone or through the form.

Can you repair only the damaged part of the chimney?

Yes, where the rest of the stack is sound. We repair the areas that have failed and close the water path that caused them. The estimate shows each area separately, which makes it clear what is included.