Family-owned top damper installation in Lakeside
Chimney top damper installation in Lakeside, with the throat damper made safe and the cable run clean.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Local pros who fit chimney top dampers in Lakeside
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
If fixing the throat damper is enough, that is the price you get.
- Free inspection and estimateYour flue tile in Lakeside is measured and the crown checked on a free visit before any damper is ordered.
- Upfront pricing, no hidden feesThe model, the handle position and any tile or crown work are priced in writing up front.
- 100% satisfaction guaranteedIf the lid does not seal or open the way we showed you, we return and adjust it.
A top damper instead of a separate cap
Sitting where a chimney cap would, a top sealing damper's lid sheds rain the way a cap does whenever it is open. On a single fireplace flue, it can take the place of a separate cap. One fitting instead of two also means less metal at the top to maintain.
For a chimney in Lakeside, we explain whether the damper model suits your flue as the only top fitting or whether a cap is still needed, for example where a spark screen is wanted. The estimate prices what the chimney needs.
Lakeside sits away from the coastline. The county for Lakeside is Clay County.
Top damper work we take on in Lakeside
- Flue tiles measured for the right damper size
- Handle brackets anchored where you can reach them
- Lids adjusted to seal on their gaskets
- Worn gaskets, springs and cables replaced
From the tile measurement to the first fire in Lakeside
-
Tile measured on the roof
The flue tile's outside size, height and rim are checked on a free visit, with the crown around it.
-
Model ordered to fit
The damper is chosen from the maker's size chart for your tile and approved on the estimate first.
-
Frame set, cable run
The frame is set in the maker's adhesive, the old plate made safe and the cable run to the handle.
-
Adjusted and demonstrated
The lid is adjusted to seal, and you try the handle before we leave, with the cure time written down.
Rain down an inland flue in Lakeside
An inland chimney in Lakeside still takes rain at its top. Without a cap or a closed damper, that rain reaches the smoke shelf and rusts the throat damper.
Closing the damper between fires keeps the flue dry.
10% off any service booked within 72 hours of inspection
The install comes 10% off when the damper is ordered no more than 72 hours after the inspection.
Top dampers and decorative gas appliances
Vented decorative gas appliances made for wood fireplaces are tested to ANSI Z21.60, and their installation instructions require the fireplace damper to be removed or permanently fixed open. The appliance vents through the flue and depends on it staying open.
Any damper that can be closed does not fit that rule unless it is locked permanently open, which defeats its purpose. Where such an appliance is in the firebox, we explain the conflict and the alternatives before anything is ordered. The appliance's own manual has the final word, and we read it before recommending anything.
Chimneys with more than one flue
On a chimney with several flues, each fireplace flue gets its own top damper and each appliance flue keeps its own cap. Flues of different heights, or flues set close together, affect which damper models fit.
We measure each flue and check the spacing between them before choosing models. Where a multi-flue cap already covers the top, we explain whether it has to be modified or replaced to make room for the damper. A drawing of the chimney top with each flue labeled goes on the estimate.
Fitting a damper to a round flue
A round flue, whether round clay tile or the top of a stainless liner, needs a damper made for a round opening or a round adapter from the damper's maker. The frame has to seat on the flue without blocking the liner's top plate or its termination.
On a relined chimney, we check the liner size and what its maker allows at the top before choosing a damper. The model and any adapter are named on the estimate. A stainless liner's top plate may also need to be sealed where the damper frame sits over it.
Tile, crown, throat and model, in writing
- Frame set in the maker's adhesive, with the cure time written down
- Cable routed clear of tile joints and old damper edges
- Handle bracket anchored in the firebox where you approve
- Make, model and flue size written down for your records
Top damper questions from Lakeside
What happens to my old damper?
It is removed or fixed fully open so it cannot close across the flue. The ticket records which.
Is the top damper install guaranteed in Lakeside?
Yes, the installation we quote is covered by our satisfaction guarantee. If the lid does not seal or open the way we showed you, we come back and set it right.
More services in Lakeside
-
-
-
-
-
-
Learn more about top-sealing damper installationAll services in Lakeside
Top sealing dampers fitted in Lakeside
Book the free top damper check in Lakeside; order within 72 hours of it and the install is 10% off.
Free Inspection