Chimney leak repair in Lakeside by local specialists
Attic first, then the roof, then the hose. That is how a free leak inspection in Lakeside finds the way in.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Chimney leak experts who test before they fix
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
We read the attic before the roof, because the stains there narrow the search.
- Free inspection and estimateThe first leak check at your Lakeside home is free, attic and roof included.
- Upfront pricing, no hidden feesThe repair is priced for the entry point the test proved, and nothing you do not need is added.
- 100% satisfaction guaranteedIf the stain comes back after the repair, tell us and we come back to find out why.
Leaks that began after other work on the house
Sometimes a chimney leak starts right after something else was done to the house. A satellite dish bracket screwed into the mortar, new gutters strapped to the brick, a re-roof that reused old flashing, or pressure washing that blasted open weak joints can all create a new way in.
When the timing lines up like that on a house in Lakeside, we look at that work first. It narrows the test and it can explain why a chimney that stayed dry for years suddenly did not. The finding then says what the earlier work changed and how we would put it right. Book the free leak inspection for your Lakeside home at (904) 920-5495, ideally before the next rain.
The 2020 Census count for Lakeside was 31,275 people. The coastline lies beyond Lakeside.
Chimney leak work we do in Lakeside
- Attic stains read to point at the likely side
- Each brick face sprayed the way driven rain hits it
- Old tar and sealer removed where they hide the entry
- Wet insulation and framing noted for drying
How chimney leak repair runs
-
Attic stains and readings
We read the stain pattern on the rafters and take moisture readings on the chimney breast before any water goes on.
-
Water test by zone
Flashing, faces, crown and flue are each wet on their own for a set time while someone watches inside.
-
Fix at the proven entry
The part that let water in gets the repair, whether that is flashing, a crown coating, a cap or repointed joints.
-
Dry-out and a storm check
Wet areas are noted for drying, and after the next heavy rain we check that the stain stays dry.
Old patches that hide the entry in Lakeside
Tar on flashing, silicone on crown cracks and paint on brick all get applied to stop leaks, and they hide where the water really enters.
On chimneys in Lakeside, patches that stand in the way of a test come off first, and that step is written on the estimate.
10% off any service booked within 72 hours of inspection
Tell us you want the 10% off when you book the leak repair.
Leaks through screws in the crown
Every chimney cap has to be fastened to something, and some are screwed straight down through the crown. Each screw is a hole in the slab that keeps rain out of the chimney. If the holes were not sealed, or the sealant has aged, water follows the screws into the core of the stack.
We check how the cap is fastened and whether the screw holes are sealed. The fix can be as simple as resealing them, or moving the cap's fixing onto the flue tile itself so the slab has no holes at all. The holes are then tested with the rest of the crown, before and after the fix.
The storm collar on a factory-built chimney
Where a factory-built chimney pipe comes up through the chase cover, a storm collar clamps around the pipe and sheds water over the joint. If the collar slips, loosens or its sealant fails, rain runs down the outside of the pipe into the chase.
That water can reach the fireplace unit and the framing without ever touching the chase cover itself, so a leak on a factory-built system is not automatically a cover problem. The collar and its sealant are listed parts of the chimney system, and repairs follow the chimney maker's instructions. We check the collar's fit and seal from the roof before any water goes on the cover.
Leaks through chase siding and trim
A framed chase is a small wall, with siding, trim and corner boards like any other wall of the house. Its joints fail in the same ways: caulk gives up at corners, siding laps open, trim boards rot at the bottom. Water that gets behind the siding runs down inside the chase and can appear on an interior wall or ceiling.
Testing a chase means wetting the siding in sections, just as we would brick faces. If the leak is in the siding rather than the chimney parts, the finding names the carpentry or siding work needed.
Recorded while tracing a leak in Lakeside
- Repair for the proven entry point, with materials named
- Follow-up check after the first heavy rain following the repair
- Temporary protection over the entry point until the permanent repair
- Test conditions recorded, including limits on reproducing wind-driven rain
Before the water test
Do you trace chimney leaks in Lakeside?
Yes. In Lakeside we read the attic and the firebox first, then water test the chimney one zone at a time and write down what we found. Call (904) 920-5495 to book.
Can you fix the leak on the same visit as the test?
Small repairs, such as resealing a fastener or resetting a loose counter flashing, can sometimes follow straight on if you approve them. Crown recasts, reflashing and masonry work are scheduled after the written estimate, in dry weather.
More services in Lakeside
-
-
-
-
-
-
Learn more about chimney leak repairAll services in Lakeside
Trace the chimney leak in your Lakeside home
A local leak specialist plans the water test around the stain in your Lakeside home and prices the fix.
Free Inspection