Chimney cap replacement in Keystone Heights by local cap pros
Rain, birds and sparks kept out of your flue in Keystone Heights, with a free inspection before any cap is chosen.
- Family owned and operated
- Free inspection and estimate
- Same-day service available
- Upfront pricing, no hidden fees
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
or call (904) 920-5495
Why Choose Us
Local cap experts for Keystone Heights chimneys
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off when you book today
Every screen we fit comes off for the sweep, so the flue can still be cleaned from the top.
- Free inspection and estimateWe measure every flue on your Keystone Heights chimney at no charge before any cap is ordered.
- Upfront pricing, no hidden feesThe cap model, its metal and the fastening are priced together, so the total is clear.
- Workmanship warrantyOur fitting and fastening carry the workmanship warranty, with the cap maker's terms in writing.
Measured on the roof, tile by tile
Sizing a cap from the ground is guesswork. Flue tiles vary in size, shape and height above the crown, and the old cap tells you only what someone picked last time. On our visits in Keystone Heights we get onto the roof, take the inside and outside dimensions of every tile, check how far each one stands proud of the crown, and look closely at the crown surface a full-crown cap would anchor into. Those figures go on the estimate beside the model we propose, so the fit can be checked against the maker's chart by you or by anyone else you ask for a second opinion. The flue gets measured on the free visit in Keystone Heights, before any cap is ordered; call (904) 920-5495.
The direct distance from Jacksonville to Keystone Heights is about 43 miles. Keystone Heights sits in Clay County.
What's Included
Cap replacement work for Keystone Heights homes
- Tile height above the crown checked for a secure fit
- Screen open area sized so the fire still draws
- Hood height taken from the maker's chart
- Cap on your Keystone Heights home fastened to hold in a storm
How It Works
Measure, match, clear, fasten
-
Every flue tile measured
On the free visit we measure each tile inside and out, and how far it stands above the crown.
-
Cap picked from the maker's chart
Model, metal grade and screen come from the sizing chart and our own numbers, never from the old cap.
-
Old cap off, new cap fastened
Set screws, a clamp band or masonry anchors are tightened to the maker's instructions, firm enough for a hard blow without cracking the clay.
-
Screen checked, debris hauled off
We check the mesh along every edge, clear out any nest material, haul away the old cap and show you the finished top.
Local Conditions
Birds and animals in Keystone Heights flues
An open flue is a good nesting spot. Chimney swifts, other birds and small animals find their way into uncapped chimneys in Keystone Heights, and their nests block the draft.
We clear the flue first, and where swifts are nesting, the cap waits until the season allows, as federal law requires.
10% off your first service when you book today
Take 10% off your first service by booking a new chimney cap in Keystone Heights today.
Slip-in caps and the inside of the tile
A slip-in cap has a lower section that drops inside the flue tile and holds with screws or spring clips against the tile wall. It suits a tile with a clean, square top edge and inside dimensions that match a standard size. The fit is measured right at the top of the tile, where old mortar, chips or a rough cut can make the opening smaller than the tile's nominal size.
A slip-in section forced into a tight tile can crack it, and one that sits loose will rattle and walk. When the inside of the tile does not measure true in both directions, a band-mount or outside-mount cap is the better choice, and we explain which and why.
A screen that comes off for the brush
Florida's code also expects the screen or cap to come off so the flue can be cleaned. So the lid should be hinged or bolted, or a screen panel held by screws that are reachable from the roof. Caps that were glued down, or screwed through the lid into the crown, defeat that expectation and turn a routine sweep into a repair job.
We fit caps whose lid or screen comes away with hand tools, and we show you which fasteners hold it in case another contractor needs to know. The same design lets the mesh be brushed clean on the roof, which is where soot deposits build first.
Reading the grade on a stainless cap
Stainless steel is a family of alloys. Cap makers state the grade in their literature, and the grade sets how the cap resists corrosion. Two caps that look alike in a catalog photo can differ in grade and in the gauge of the sheet, and the thinner one dents and flexes more in wind. Both get named before a cap is ordered: the grade the maker specifies and the gauge of the hood and frame. Knowing the grade also tells a future contractor which fasteners and sealants are compatible, which matters when the cap is serviced years from now by someone who was not there when it went on.
Free Inspection
What sets the cap on your estimate
- Height of each tile above the crown, and whether it can hold a cap
- Cap model and maker, chosen from the sizing chart for your tiles
- Nest, debris or animal removal needed before the cap goes on
- Hood height above the tallest tile, per the maker's drawing
FAQ
Cap questions we hear in Keystone Heights
Do you replace chimney caps in Keystone Heights?
We do. Call or send the form, tell us what you see at the top of the chimney, and we set a time to measure in Keystone Heights.
Can the old cap be repaired instead of replaced?
A sound cap that has only worked loose can be reseated and refastened. Rusted mesh, a split band or a bent hood mean replacement. We tell you which one you have before any work is priced.
Our Services
More services in Keystone Heights
-
-
-
-
-
-
Learn more about chimney cap installation and replacementAll services in Keystone Heights
Replace a missing or rusted cap in Keystone Heights
Single-flue or multi-flue, the new cap for your chimney in Keystone Heights is priced before it is ordered.
Free Inspection