Local chimney liner installation for Keystone Heights homes
Stainless liners fitted in Keystone Heights chimneys with a clean-out at the bottom and a screened cap at the top. The flue inspection is free.
- Family owned and operated
- Free inspection and estimate
- Same-day service available
- Upfront pricing, no hidden fees
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
or call (904) 920-5495
Why Choose Us
Relining pros who prove the flue in Keystone Heights first
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off when you book today
The flue is proved with a test piece first, so the liner and its insulation are sure to pass.
- Free inspection and estimateWe sweep and measure the flue in Keystone Heights at no charge before any liner is ordered.
- Upfront pricing, no hidden feesLiner size, alloy, insulation and cap are one written price, set before the order goes in.
- Workmanship warrantyHow we install the liner is covered by our workmanship warranty, and the maker's terms come in writing.
Two flues, one new appliance
When a chimney carries two flues and only one is being relined, the job has to respect the other. The liner goes into the flue that serves the new appliance, the second flue is checked and swept, and the masonry wythe between them is looked at wherever it shows.
Up top, a single cap may have covered both flues. With a liner cap now on one of them, the old cap on your Keystone Heights chimney may no longer fit, so we check whether it can be refitted or needs a new arrangement. If the second flue sits idle, a screened cap or a cover keeps it from collecting debris. Call (904) 920-5495 and a liner specialist will measure your Keystone Heights flue for free.
The 2020 Census counted 1,446 residents in Keystone Heights. Keystone Heights sits inland, more than about six miles from the coast.
What's Included
What relining covers in Keystone Heights
- Flue proved with a test piece or guide cone
- Stainless alloy picked for the fuel you burn
- Round liner pressed oval where the tile is narrow
- Broken tile cleared out of the liner's way
How It Works
From proof run to capped liner in Keystone Heights
-
Flue swept and proved
The old flue is cleaned and checked, and a test length or cone is lowered to confirm the liner will pass.
-
Liner sized to the appliance
The diameter comes from the stove collar, the insert or the fireplace opening, with insulation where the listing calls for it.
-
Liner lowered and connected
The liner goes down full height and joins a tee with a clean-out, or an adapter on the insert.
-
Top plate, clamp and cap
The top plate is fastened to the crown, the liner is clamped and trimmed, and a screened cap goes on.
Local Conditions
Sizing a liner for an open fireplace in Keystone Heights
An open fireplace has no collar to size from, so the liner is sized from the fireplace opening, with the code's minimum flue area tied to that opening.
We measure the opening in your Keystone Heights home and show the math on the estimate.
10% off your first service when you book today
New customers save 10% on a first relining job.
When the chimney's clearances cannot be confirmed
A liner's zero-clearance rating depends on its listing and, for some systems, on insulation. Liner makers say that if the chimney's own airspace to combustibles cannot be confirmed, the liner must be installed with an approved insulation wrap.
Clearances can be hard to confirm: the chimney sits behind drywall, the attic side is packed with insulation, or framing was built tight to the brick. In those cases the insulated system is what the listing requires. We say whether insulation is required for that reason or recommended for draft and condensation. The insulation also takes up room, which the flue proof has to allow for.
Joining a liner to a fireplace insert
An insert sits inside the fireplace with its flue collar pointing up into the smoke chamber. A stove adapter from the liner maker fits onto that collar and clamps to the bottom of the liner, giving a sealed connection from insert to cap.
Where the collar and the flue do not line up, a listed elbow at 30, 45 or 90 degrees carries the liner across. The insert's own manual sets any extra rules for its connection, and those come first. The damper frame may need to be cut back to let the liner through, which is listed as its own step. The insert is then set back in place and its surround refitted.
One liner, one kind of fuel
Oil and wood do not share a liner. Makers bar connecting an appliance that burns liquid fuel, such as oil, to a liner that vents a solid-fuel appliance like a wood stove. For sizing, the same instructions send an oil appliance to NFPA 31, the oil-burning standard, rather than to the rules for wood.
Gas appliances have their own common-venting rules under NFPA 54, and the appliance manuals say whether sharing is allowed. Where a chimney serves two different appliances, we plan two flues or two liners, each sized to its appliance. The record says which appliance each liner serves, so nobody connects the wrong one later.
Free Inspection
Size, alloy and listing on paper
- Flue proved with a test piece or guide cone before ordering
- Insulating blanket or poured mix wherever the listing calls for it
- Sweep of the old flue and smoke chamber before installation starts
- Permit need and who files it, stated in writing up front
FAQ
Relining questions from Keystone Heights
Do you install chimney liners in Keystone Heights?
We do. Describe the fireplace or stove and the reason relining came up, and the Keystone Heights estimate visit is planned around it.
Does a wood stove need a stainless liner?
The code requires the flue lining to suit the appliance, and a stove set into an existing masonry chimney needs a flue sized to its collar. Our answer is a listed stainless liner from the stove collar to the top, sized from the stove's manual.
Our Services
More services in Keystone Heights
-
-
-
-
-
-
Learn more about chimney liner installation and reliningAll services in Keystone Heights
Free flue check before relining
Our relining pros sweep and prove your Keystone Heights flue before sizing a liner. Call (904) 920-5495.
Free Inspection