Chimney masonry repair in Keystone Heights by local masons
The four-inch wall and the air gap to framing stay intact when our local masons repair your Keystone Heights chimney. Inspections are free.
- Family owned and operated
- Free inspection and estimate
- Same-day service available
- Upfront pricing, no hidden fees
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
or call (904) 920-5495
Why Choose Us
Chimney masonry experts who match the old wall
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off when you book today
Repair or rebuild, you get the reasons in writing and a price for each when both are reasonable.
- Locally owned and operatedA locally owned business answers for the brick and mortar work on your Keystone Heights chimney.
- Upfront pricing, no hidden feesEach area of the stack is priced on its own line, so you can see what each repair costs.
- 100% satisfaction guaranteedIf the repair does not look or hold the way we agreed, we come back and make it right.
Masonry work and the crown on top
The crown sits on the top course of brick, so masonry repair and crown work often meet. If the top courses are loose, the crown resting on them cannot be sound, and it is taken off while the brick is reset. If the crown is cracked, water from it may be what damaged the brick below.
In Keystone Heights, we plan the two together, price them apart, and do them in the order that leaves a solid base for the crown. The cap, if it anchors into the crown, comes off and goes back on as part of that sequence. A mason can look at your Keystone Heights chimney for free; ring (904) 920-5495 to set the day.
At the 2020 Census, Keystone Heights was home to 1,446 people. Keystone Heights is inland, more than about six miles from the coast.
What's Included
What our masonry work covers in Keystone Heights
- Every damaged area mapped on the stack by type
- Water path closed before any mortar is mixed
- Loose top courses relaid in fresh mortar
- Stair-step cracks marked and measured on your Keystone Heights chimney
How It Works
From damage map to cured joints in Keystone Heights
-
Water path traced first
We check the crown, the cap, the shoulders, the weather side and the flashing before pricing joints or brick.
-
Joints raked, bad brick cut out
Worn mortar is raked back to sound depth, and cracked or spalled units come out without thinning the wall.
-
Matched mortar packed and tooled
Pre-hydrated mortar of the type on your estimate goes in, with salvaged or new brick matched for size and color.
-
Brick cleaned the gentle way
Smears come off with a brush and water while they are fresh, and no harsh acid touches the brick.
Local Conditions
Cracks that climb the chimney in Keystone Heights
Stair-step cracks along the mortar joints are movement cracks. Some are old and stable; others are still opening as the chimney settles or pulls away from the house.
On chimneys in Keystone Heights we mark the ends and width with a date, and a crack that keeps moving points to ties or footing work.
10% off your first service when you book today
Tell us it is your first service when you book, and 10% comes off the brickwork.
Cracks that pass through the brick itself
When a crack runs straight through the brick units instead of around them through the mortar, the brick carried the stress. That can mean the mortar was harder than the brick, a heavy load or impact hit that spot, or rusting metal inside the wall pushed the brick apart.
A cracked unit does not heal with a surface fill. It is cut out, the pocket is cleaned, and a matched brick is set in fresh mortar. The cause is recorded as well, because replacing units without dealing with it can lead to new cracks nearby. The replacement is set flush with its neighbors and tooled to match.
Loose courses at the top of the stack
Brick in the uppermost courses is open to weather on every side and to whatever runs off the crown above it. Once the mortar holding those units has washed out, the bricks rock or lift when pushed, and water pours straight into the inside of the stack. Resetting works when only a handful are loose: each unit is lifted, cleaned of old mortar and bedded again.
When the rocking extends across several courses and through the wall, the section is dismantled to the first solid course and relaid. The crown and any cap are removed beforehand and set back on the finished brick.
White deposits as a map of the water
White deposits on chimney brick are salts carried out by water as it dries at the surface. BIA's efflorescence note explains that it takes three things together: soluble salts, water in contact with them long enough to dissolve them, and a path through the masonry to the surface. Because the deposit appears where water leaves the wall, its pattern shows where water has traveled.
A band under the crown, streaks below a shoulder, or a patch on one face each point to a different entry point. We read that map before planning the repair. The deposit itself can be brushed off dry once the water that carried it has been stopped.
Free Inspection
Mortar type, brick source and joint depth
- Mortar type under ASTM C270, and why it suits the wall
- Shoulder and wash condition, with the repair for each
- Water entry points found, and the repairs that close them
- Protection of fresh joints from rain while they cure
FAQ
Masonry questions from Keystone Heights
Can you repair only the damaged part of the chimney?
Yes, where the rest of the stack is sound. We repair the areas that have failed and close the water path that caused them. The estimate shows each area separately, which makes it clear what is included.
Can the masonry work go ahead while I am out?
Yes, for work on the outside of the chimney, as long as the roof is safe to reach. For a look from the attic or into the fireplace, someone needs to be there to let us in.
Our Services
More services in Keystone Heights
-
-
-
-
-
-
Learn more about chimney masonry repairAll services in Keystone Heights
Crumbling mortar, free look
Mortar that crumbles under a key is worth a call to (904) 920-5495, and our masonry experts check the joints on each side of the chimney in Keystone Heights.
Free Inspection