Stone veneer chimney repair for Hilliard homes
A local family business for stone chimneys in Hilliard, with 10% off stone work you book inside three days of the inspection.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Local stone masons who match mortar and joints in Hilliard
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Joints are raked to sound mortar and filled in layers, never skimmed over.
- Free inspection and estimateWhether your Hilliard chimney is full stone or veneer is settled on a free visit, before any price.
- Upfront pricing, no hidden feesStones, joints and veneer area are priced in writing one line at a time.
- Family owned and operatedOur family-owned masons approve the mortar sample with you before the first joint is filled.
Soil and mulch piled against the base
A veneer chimney drains at its base through a screed or flashing that lets water out from behind the stone. Soil, mulch or a raised patio built against that base blocks the exit, and water backs up behind the veneer. Mulch and soil against the veneer also keep the lowest course damp.
We check the base of stone chimneys in Hilliard for a working drainage exit and note anything burying it. Clearing it may be a small job, and the estimate says whether the base detail itself needs repair.
Hilliard lies within Nassau County. The 2020 Census counted 2,967 residents in Hilliard.
Stone chimney repairs we handle in Hilliard
- Loose adhered veneer taken off and reinstalled
- Bulging anchored veneer secured or rebuilt
- Veneer cut back from the roof surface
- Stone cleaned by tested, gentle methods
From the first loose stone to the last tooled joint in Hilliard
-
Describe what moved
Tell us what has shifted or fallen, and the free visit comes equipped for it.
-
Build and backing confirmed
Corners, joints and the base show the build, and a loose piece shows what is behind the veneer.
-
Reset, repoint or reinstall
Stones go back on fresh beds, joints fill in layers, and veneer returns to a repaired backing.
-
Matched and cured
An approved mortar sample and the old joint profile guide the finish, and the cure time is written down.
Storm season and stone chimneys in Hilliard
From June 1 to November 30, the Atlantic hurricane season as the National Hurricane Center defines it, strong wind can loosen top stones or crack a crown far from the shore. In Hilliard, a stone out of line at the top is worth a look before the next storm.
The top courses and the crown get a look after each storm.
10% off any service booked within 72 hours of inspection
Say yes to the stone work within 72 hours of the inspection and save 10%.
The cap on top of a stone chimney
The top of a stone chimney follows R1003.9.1 like any masonry chimney: a cap of concrete, metal or stone that slopes water away, overhangs to a drip, and meets the flue liner at a sealed joint that lets the two move apart. A flat mortar wash across the top stones meets none of that.
Water that leaves the top the wrong way runs down the stone and into the joints below. We check the cap on every stone chimney we work on and price crown work separately, in the order that keeps the new stone work dry. A stone cap made from a single slab or a few large pieces also needs a drip edge cut or formed underneath it.
Ties behind anchored stone veneer
Anchored veneer is held to the chimney behind it by metal ties set in the joints. When those ties corrode or were never placed, sections of stone can bulge away from the backing even though the joints look fine.
We check for bulging and movement by sight and by tapping, and look at a tie where a joint can be opened. Where ties have failed, retrofit anchors can be drilled in through the joints, or the section can be taken down and rebuilt. The estimate explains the choice. Retrofit anchors are placed in a pattern the maker specifies, and their count is written on the estimate.
Repairing dry-stack veneer
Dry-stack veneer is set with pieces fitted tight together and no mortar joint showing, so the look depends on fit. A repair has to reproduce that fit, which means trimming pieces to close the gaps and keeping mortar back from the face.
Because there is no visible joint to repoint, loose pieces are found by sound and by pressing. We count the loose pieces, reset them with the setting mortar the maker specifies and trim replacements so the pattern closes up. A dry-stack repair is slower per square foot than a grouted one, and the estimate prices it that way.
Stone, joints, backing and base, in writing
- Base drainage exit checked and opened where buried
- Veneer gap above the roof corrected to the maker's guide
- Crown and flashing findings priced as separate lines
- Access equipment and roof protection listed on the estimate
Stone chimney questions from Hilliard
Could you come out today for a loose stone in Hilliard?
If a slot is open that day, yes. If a stone has already fallen, keep people clear of the base until we arrive.
Will the new mortar look different?
It starts darker and dries lighter, which is why we cure test samples and compare them before work begins. The joint style is matched as well as the color.
More services in Hilliard
-
-
-
-
-
-
Learn more about stone chimney repairAll services in Hilliard
Loose stones or failing veneer in Hilliard?
Our masons identify the build, check the joints and price each stone in Hilliard before work starts. Call (904) 920-5495.
Free Inspection