Local top sealing damper installation in Hilliard
Throat damper rusted or leaking in Hilliard? We fit a gasketed damper at the top of the flue after a free inspection.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Local pros who fit chimney top dampers in Hilliard
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
The lid is adjusted until it closes evenly on its gasket.
- Free inspection and estimateYour flue tile in Hilliard is measured and the crown checked on a free visit before any damper is ordered.
- Upfront pricing, no hidden feesThe model, the handle position and any tile or crown work are priced in writing up front.
- 100% satisfaction guaranteedIf the lid does not seal or open the way we showed you, we return and adjust it.
A top damper instead of a separate cap
Sitting where a chimney cap would, a top sealing damper's lid sheds rain the way a cap does whenever it is open. On a single fireplace flue, it can take the place of a separate cap. One fitting instead of two also means less metal at the top to maintain.
For a chimney in Hilliard, we explain whether the damper model suits your flue as the only top fitting or whether a cap is still needed, for example where a spark screen is wanted. The estimate prices what the chimney needs.
Hilliard lies inland. Hilliard falls within Nassau County.
What our crew fits and fixes at the flue top in Hilliard
- Top sealing dampers set in the maker's adhesive
- Lids adjusted to seal on their gaskets
- Owners shown how to open, close and lock the lid
- Make and model of your Hilliard damper written down
How our crew fits a top damper in Hilliard
-
Tile measured on the roof
The flue tile's outside size, height and rim are checked on a free visit, with the crown around it.
-
Model ordered to fit
The damper is chosen from the maker's size chart for your tile and approved on the estimate first.
-
Frame set, cable run
The frame is set in the maker's adhesive, the old plate made safe and the cable run to the handle.
-
Adjusted and demonstrated
The lid is adjusted to seal, and you try the handle before we leave, with the cure time written down.
The crown under an inland damper in Hilliard
The tile and crown under a damper decide how secure it is. In Hilliard, a crown cracked by years of rain and heat can loosen the tile the damper is fixed to.
The crown is checked first and repaired where needed.
10% off any service booked within 72 hours of inspection
Leaky throat damper? A top damper ordered within three days of the inspection is 10% off.
Measuring the flue tile
Top dampers are sized to the outside dimensions of the flue tile, since the frame sits over or on its top edge. Clay tiles come in several square and rectangular sizes, and round flues need a model made for round openings.
On the roof, the tile's outside dimensions are measured and its top edge checked for level and soundness. The model is chosen from that measurement and the maker's size chart, and both go on the estimate. A multi-flue chimney is measured flue by flue, since tiles on the same chimney can differ in size.
Factory-built chimneys and added parts
A factory-built fireplace and its metal chimney are listed as a system, and parts added to the top must be listed for that chimney. R1005.2 keeps unlisted decorative tops off factory-built chimneys, and the same logic applies to other add-ons.
Top dampers made for clay flue tiles are not fitted to listed metal chimneys. If the fireplace maker offers a listed damper accessory, we can price it; otherwise the estimate explains the options within the listing. Where the maker offers no listed option, the answer may simply be a tight-fitting listed cap and a well-kept firebox damper.
Top dampers and chimney plugs compared
An inflatable plug or a draft stopper closes the flue from below and has to be taken out before a fire. A top damper closes the flue from above and opens with its handle. Either can be left closed by mistake, and neither should be.
A top damper's handle sits in the firebox, where it is hard to miss before lighting, and it seals the whole flue from the weather. We explain both options, and fit the damper where it suits how you use the fireplace. Some owners keep a plug as well as a top damper; the plug still has to come out before a fire.
What we check before fitting a top damper in Hilliard
- Frame set in the maker's adhesive, with the cure time written down
- Lid adjusted to close evenly on its gasket
- Round flue or liner top matched with the maker's adapter
- Existing top damper serviced with the maker's parts
Before the damper is ordered
Can a top damper go on any chimney?
It needs a masonry fireplace flue with a sound tile standing high enough above the crown. Flues for other appliances and listed metal chimneys are handled differently, and we tell you which applies.
Is the top damper install guaranteed in Hilliard?
Yes, the installation we quote is covered by our satisfaction guarantee. If the lid does not seal or open the way we showed you, we come back and set it right.
More services in Hilliard
-
-
-
-
-
-
Learn more about top-sealing damper installationAll services in Hilliard
Measure, order, set, adjust, done
A lid at the top, a handle in the firebox, and your chimney in Hilliard closed between fires. Call (904) 920-5495.
Free Inspection