Local chimney repointing in Hilliard

Every face of your Hilliard chimney mapped for free, then a written price for each side.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Masons who survey every face first

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

The color is matched from a cured test batch before a single joint is filled.

Free inspection and estimateEvery face of your Hilliard chimney is scratch-tested and sketched at no charge.
100% satisfaction guaranteedIf the new joints are not sound, full and matched as agreed, we come back and fix them.
Family owned and operatedA family masonry crew does the survey and the work, so the person who priced a face is the one who repoints it.

Call (904) 920-5495 Free Inspection

White crust on the joints

White, powdery crust on a chimney's joints and brick is often efflorescence, the residue salts leave once water has brought them out of the wall and dried off. Where it forms, water has been travelling inside the masonry.

The crust itself brushes off. What matters is where the water gets in, and open joints are one path. We look at the joints, the top of the chimney and the metal where it meets the roof before deciding what the repointing should cover. White deposits on your Hilliard chimney? Call (904) 920-5495 for a free inspection.

Census takers counted 2,967 people in Hilliard in 2020. Hilliard sits away from the coastline.

Repointing work we do in Hilliard

Deep joints filled in layers, not one pass
Mortar type chosen to suit the brick
Old caulk and skim patches cut out
Brick faces brushed clean as we go

Call (904) 920-5495 Free Inspection

Survey, rake, fill, tool

Every face surveyed
Joints are scratch-tested at several heights and the failed courses marked on a sketch.
Joints raked and cleaned
Old mortar comes out to sound depth, head joints by hand, then joints are cleaned and dampened.
Filled in layers and tooled
Matched mortar goes in stage by stage, then is tooled to the original profile.
Cured and cleaned up
Fresh joints are protected while they cure, the faces brushed and the roof cleared.

Before a new roof in Hilliard

Roof replacements disturb the metal at the base of the chimney, which is often set into mortar joints.

Repointing those joints before the roofers arrive in Hilliard gives the new metal sound mortar to seat into.

10% off any service booked within 72 hours of inspection

Repointing earns the discount whether or not you have used our masons before.

Call (904) 920-5495 Free Inspection

Tooling the joint to shed water

Once the final layer has firmed, the joint is tooled: pressed and shaped with a jointer to compact the surface and match the profile of the old joints. Tooling closes tiny gaps at the brick edge where water could enter.

For exterior walls, the Brick Industry Association's water penetration note prefers concave and V profiles made with a jointer, since tooling compacts the mortar and the shape sheds rain. Where the original joints are a different profile, we match them so the wall reads as one. The profile used is written on the estimate. A joint tooled too early smears, and one tooled too late crumbles at the edge, so timing is watched face by face.

Protecting fresh joints from the weather

Fresh mortar is vulnerable for its first days. A heavy rain can wash the surface out of a new joint, and strong sun or wind can dry it too fast.

We watch the forecast when scheduling, cover fresh work when rain is likely and shade sun-facing sides as needed. If the weather turns partway through, work stops at a clean edge rather than leaving half-filled joints. These pauses are part of doing repointing properly, and the estimate allows for them without surprise charges. Covers stay on until the joints have firmed enough to take a shower without losing their surface.

Lime-rich mortar in older chimneys

Chimneys built generations ago often used mortar with much more lime and less cement than modern mixes. Lime mortar is softer and more vapor permeable, and the soft old brick around it was built to work with it.

Preservation Brief 2 advises matching the old mortar's properties when repointing historic masonry. On an older chimney we look at the existing mortar before choosing a mix, and where it is lime-rich, the new mortar follows suit rather than jumping to a strong cement mix. The estimate names the mix chosen. A lime-rich mix also cures more slowly, and the schedule on the estimate allows for that.

Joint findings written down before pricing

Mortar type under ASTM C270 and the reason for it
Loose top courses that need relaying rather than repointing
Interior or attic joints, with their own access and cleanup
Roof protection, debris collection and gutter cleanup

Repointing questions from Hilliard

Do you repoint chimneys in Hilliard?

Yes. Our masons repoint chimneys across Nassau County, Hilliard included. Mention the sandy sides on the phone, and those faces are surveyed first, at no charge.

What does the repointing survey in Hilliard cost?

The survey and estimate are free. Book the repointing within 72 hours of the survey and 10% comes off.