Fireplace hearth repair for homes in Hilliard
From one cracked tile to a new slab, a family-owned crew handles hearth work in Hilliard and backs it with our guarantee.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Hearth experts who measure before they tile
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Heights at the firebox, the doors and the floor are checked before the slab is set.
- Free inspection and estimateYour hearth in Hilliard is sounded, leveled and measured on a free visit before any price is written.
- 100% satisfaction guaranteedA tile or stone we set that comes loose is ours to fix, and we return to reset it.
- Family owned and operatedA family-owned local crew explains each layer of the repair, from the support to the grout line.
A hearth that sounds hollow underfoot
Tap a hearth tile with the handle of a screwdriver and listen. A tile stuck fast to its bed gives a dull click, and one that has let go of its bed gives a hollow rattle, even while it still looks flat and tight. Hollow tiles are the next ones to crack, because they bridge a gap instead of sitting on mortar.
Our hearth specialists sound the whole surface in Hilliard and mark each hollow tile on a sketch, so the written estimate counts the units that need resetting. If the hollow area follows a line, the slab gets checked as well.
The coastline lies beyond Hilliard. Hilliard is in Nassau County.
Hearth repair work we take on in Hilliard
- Undersized extensions enlarged to the code size
- Stone slabs rebedded, glued or replaced
- Factory-built hearth pads checked against the listing
- Your hearth in Hilliard measured and sketched before work
The order of a hearth repair
-
Describe the hearth on the call
Cracked, hollow, sunken or too small, a short description sets up the free visit and what we bring.
-
Sounding and measuring
Each tile is tapped, the slab's level is read and the extension is measured against the opening.
-
Support first, surface second
A moving slab or missing support is fixed before tile or stone goes back on a full bed of the named mortar.
-
Cured before heat, then handed back
The bed cures before grout and fire, and we show you the finished edge and where the clear zone ends.
What wears a hearth in Hilliard
Hilliard is inland, so salt corrosion is not the concern for the metal at the hearth. What wears a hearth here is inside the house: heat at the opening, dropped logs, cleaning products and a support that moves.
The repair plan in Hilliard follows those causes, starting with the base and ending with a finish chosen for the heat.
10% off any service booked within 72 hours of inspection
Cracked or loose hearth? Approve the repair inside 72 hours of our look and save 10%.
Reading the line a hearth crack takes
The path of a crack says where the stress came from. A crack parallel to the firebox, right at the joint, points to the extension and the fireplace moving apart. A diagonal from a front corner points to a slab that lost support at that corner. A web of fine lines inside one tile points to the tile itself or its glaze.
We sketch the cracks before anything is lifted and record their width. That sketch is how we choose between resetting a few units, recasting a slab and supporting what is underneath, and it stays with the ticket for the next visit.
Full contact under every tile
Tile on a hearth is only as strong as the bed under it. A tile set on dabs of adhesive at its corners carries its load on those dabs, and a dropped log cracks it across the gaps. The American National Standards for tile, A108 for installation and A118 for setting materials, set coverage requirements for the mortar under each unit.
On a hearth, that means back-buttering tile and stone, pressing each unit into the bed and lifting one now and then to check the contact. Larger stone pieces get a full mortar bed. It is slower than spot-setting, and it is why tile we set stays solid under a tap.
Relaying loose brick on a hearth
A brick hearth surface fails at its joints. Once mortar erodes or cracks, the units loosen and rock, and water from cleaning reaches the bed. Relaying means lifting the loose brick, cleaning old mortar off each unit and off the bed, and setting them back on fresh mortar with full joints.
Brick in front of the opening sees heat and wear, so we reuse sound units where we can and replace cracked ones with brick matched for size and color. Joints are tooled to match the rest of the surface. The number of units relaid is on the ticket, so the invoice matches what you saw.
What we check on a hearth in Hilliard before pricing
- Hearth and extension measured against the opening size and R1001.10
- Slab level checked across the front and at both corners
- Water source above the hearth named and priced as its own line
- Room and floors covered, with dust kept to the work area
Before your hearth is lifted
Is the hearth inspection in Hilliard really free?
Yes. We measure and check the hearth, show you what we found and leave a written estimate at no charge. You decide afterward, with no pressure from us.
Do you work on hearths for factory-built fireplaces?
Yes. We follow the unit's listing and manual for the pad size and material, and use listed products where the maker calls for them. Have the model number ready when you call if you can find it.
More services in Hilliard
-
-
-
-
-
-
Learn more about fireplace hearth repairAll services in Hilliard
Cracked hearth in Hilliard? Get it measured
From a few loose tiles to a new extension, our pros in Hilliard give you the options and the price in writing.
Free Inspection