Hearth repair in Arlington, from the base up

A hearth that sounds hollow is next to crack. Local pros in Arlington find it by sound, for free.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Hearth experts who measure before they tile

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

We measure the extension against the code on every hearth job, not only when asked.

Free inspection and estimateYour hearth in Arlington is sounded, leveled and measured on a free visit before any price is written.
100% satisfaction guaranteedA tile or stone we set that comes loose is ours to fix, and we return to reset it.
Family owned and operatedA family-owned local crew explains each layer of the repair, from the support to the grout line.

Call (904) 920-5495 Free Inspection

Wood flooring that runs onto the hearth

A new floor sometimes gets laid right up to the firebox, or a strip of wood ends up inside the area the extension is supposed to cover. The code keeps that zone noncombustible because embers and rolling logs land there. Wood, carpet or vinyl inside it gets cut back, and the extension fills the space.

The estimate for a hearth in Arlington shows where the new edge falls, what closes the joint and whether the flooring cut is ours or your flooring installer's. Family owned, local and plain about who does what.

Arlington lies within Duval County. Arlington does not reach the coast.

What our hearth crew fixes in Arlington

Cracked hearth tile cut out and replaced
Crumbling grout raked out and renewed
Wood flooring cut back from the ember zone
Heat-cracked tile near the opening rebedded

Call (904) 920-5495 Free Inspection

From the first tap to the first fire in Arlington

Describe the hearth on the call
Cracked, hollow, sunken or too small, a short description sets up the free visit and what we bring.
Sounding and measuring
Each tile is tapped, the slab's level is read and the extension is measured against the opening.
Support first, surface second
A moving slab or missing support is fixed before tile or stone goes back on a full bed of the named mortar.
Cured before heat, then handed back
The bed cures before grout and fire, and we show you the finished edge and where the clear zone ends.

Inland hearths and water from above in Arlington

Being inland does not keep rain out of an open flue. In Arlington, a missing cap or a failed seal at the top still lets water run down to the inner hearth.

Water marks at the back of a hearth in Arlington send us up the flue before any tile is reset.

10% off any service booked within 72 hours of inspection

For your Arlington home, hearth work agreed within 72 hours of the visit comes 10% off.

Call (904) 920-5495 Free Inspection

When the firebox floor sits well above the room

A firebox whose floor stands 8 inches or more over the extension changes the thickness rule. At that height the code lets the extension shrink to a thin layer, no less than 3/8 inch, of an approved noncombustible surface such as tile or stone. The exception covers the thickness only.

It does not shrink the size. The extension still runs the distances R1001.10 sets in front and to the sides, measured from the opening. A raised hearth rebuilt with a thin tile surface is fine under the exception, as long as the 8 inches are really there and the tile rests on noncombustible support. We measure that height before choosing the build-up.

Relaying loose brick on a hearth

A brick hearth surface fails at its joints. Once mortar erodes or cracks, the units loosen and rock, and water from cleaning reaches the bed. Relaying means lifting the loose brick, cleaning old mortar off each unit and off the bed, and setting them back on fresh mortar with full joints.

Brick in front of the opening sees heat and wear, so we reuse sound units where we can and replace cracked ones with brick matched for size and color. Joints are tooled to match the rest of the surface. The number of units relaid is on the ticket, so the invoice matches what you saw.

Keeping the ember zone clear

The extension exists to catch sparks, embers and a rolling log on a floor that will not burn. A rug, a wood box or a stack of newspaper set on it puts fuel back in that zone. Fireplace screens and doors help, but they do not change what the floor in front is for.

At the walk-through we point out the full required extension so you can see where the clear zone ends. Tools with wooden handles and a log holder belong beside it rather than on it. A strip of painter's tape along the line for the first few fires helps everyone in the house learn it.

Tile, slab, support and size, in writing

Every tile sounded, with hollow units counted on a sketch
Slab level checked across the front and at both corners
Grout raked and renewed, product and color written down
Ash dump frame reset in refractory mortar and lid fit checked

Hearth repair questions from Arlington

Is a same-day hearth visit possible in Arlington?

Same-day visits happen when a slot is open that day. Describe the hearth on the call and we give you the earliest time we have.

Is the hearth inspection in Arlington really free?

Yes. We measure and check the hearth, show you what we found and leave a written estimate at no charge. You decide afterward, with no pressure from us.