Metal fireplace repair in Yulee, done to the listing
Read us the model on the rating label, and our Yulee prefab pros can check parts before they arrive.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Local zero-clearance fireplace pros in Yulee
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Part numbers go on your ticket, so a future repair begins with the correct parts.
- Free inspection and estimateThe firebox and the pipe run in Yulee are checked at no charge, from the panels up to the cap.
- Upfront pricing, no hidden feesEach part goes on the estimate by the maker's number and price, and you approve it before anything is ordered.
- 100% satisfaction guaranteedA listed part we install that fails to do the job we described is ours to correct.
A maker that no longer exists
Brands of factory-built fireplaces have merged, been bought and been renamed, so the name on the face may not be the company that supports it today. The new owner may still supply parts for an older line. For others, the listed parts are gone.
We look up the lineage of your fireplace in Yulee before quoting and tell you straight whether a listed repair exists. If it does not, the estimate says so and shows what a replacement unit involves, so you are not paying for a repair that cannot be done right.
The 2020 Census counted 14,195 residents in Yulee. Yulee does not reach the coast.
From the panels to the cap on top
- Panel cracks measured against your model's limit
- Prefab damper plates and linkages repaired
- Dented pipe sections replaced within the same series
- Storm collars reset at the chase top
From the rating label to the first fire in Yulee
-
Read us the label
The model and series on the rating label let us check parts before the free visit.
-
Firebox and pipe traced
Panels, steel, damper and each reachable joint, firestop and shield are checked and noted.
-
Listed parts ordered
Parts are ordered by the maker's number for your model once you approve the estimate.
-
Fitted, cured, explained
Parts go in by the diagram, and you get the cure schedule and the part numbers in writing.
Rust on an inland prefab firebox in Yulee
Rust on a firebox floor in inland Yulee is not a salt problem. It is water: rain getting past the chase top, a missing cap or a storm collar that slid down the pipe.
We find the path first, then decide whether the steel in your Yulee fireplace is sound enough to keep.
10% off any service booked within 72 hours of inspection
Refractory panels, a damper or the pipe run, each repair comes 10% off.
Damper parts on a factory-built unit
The damper in a prefab fireplace is built into the unit, with a plate, a frame and a linkage the maker designed. Plates rust to their seats, springs lose tension and linkages break at their pins. Dampers made for masonry throats do not fit these units and are not part of their listing.
We order the damper parts by the model number and fit them so the plate opens fully and closes square. On units where the damper parts are no longer made, we tell you what that means for using the fireplace before anything is ordered.
A cap listed for the chimney it sits on
The cap on top of a metal chimney is not a generic rain cap. It is part of the chimney system, listed with it, and the manual names the cap models that may be used. R1005.2 also keeps decorative shrouds off factory-built chimneys unless they are listed for that chimney system.
When a cap has rusted, blown off or clogged, we replace it with a cap listed for that chimney. A decorative shroud added later without a listing is noted as its own item, with what removing it involves, so you can see the reason and the cost before deciding.
Heaters that cannot go into a prefab firebox
R1004.4 bars unvented heaters built to look like logs from factory-built fireplaces unless the fireplace carries a listing for that use. The prefab box and its chimney were tested for wood fires vented outdoors, not for an appliance that releases what it burns into the room.
If one is already sitting in your fireplace, we check the fireplace label for that listing and write down what we found. Where it is not listed, the estimate explains the options, including returning the fireplace to wood use or replacing it with a unit built for the purpose.
Label, panels, pipe and cap, in writing
- Refractory panels ordered by the maker's part number
- Firebox floor and back checked for rust with the grate out
- Firestop spacers checked at each ceiling the pipe crosses
- Fan kit parts replaced by model, electrician named for any circuit
Prefab fireplace questions from Yulee
Could a mason line my metal fireplace with firebrick?
Not without taking it out of its listing. Replacement panels are the ones the maker lists for your model, ordered by number.
Do you fix the fan on a circulating fireplace?
Yes, with the fan kit parts listed for the model. If the fan needs a new outlet or circuit, an electrician handles that part, and we name it on the estimate.
More services in Yulee
-
-
-
-
-
-
Learn more about prefab and zero-clearance fireplace repairAll services in Yulee
Cracked panels or loose pipe in Yulee?
Keep the rating label in view while you call (904) 920-5495, so parts for your fireplace in Yulee are looked up before the visit.
Free Inspection