
Local chimney masonry repair for Springfield homes
Stair-step cracks and sandy joints on a chimney in Springfield, inspected free and repaired once the movement has stopped.
- Family owned and operated
- Free inspection and estimate
- Same-day service available
- Upfront pricing, no hidden fees
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
or call (904) 920-5495
Why Choose Us
Brick and mortar specialists for Springfield chimneys
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off when you book today
Your Springfield estimate carries a map of each damaged area with its cause written beside it.
- Locally owned and operatedA locally owned business answers for the brick and mortar work on your Springfield chimney.
- Upfront pricing, no hidden feesEach area of the stack is priced on its own line, so you can see what each repair costs.
- 100% satisfaction guaranteedIf the repair does not look or hold the way we agreed, we come back and make it right.
How our masonry estimate is laid out
Each masonry estimate we write for your Springfield chimney follows the same order. First, what we found and where, with sizes. Second, the cause of each problem, and the repair that removes the cause. Third, the masonry work itself: joints, units, courses and shoulders, with the mortar type and the brick source. Fourth, what can wait and what to watch in the meantime.
Prices sit beside each line, so you can choose to do part of the work now and part later without losing track of what was found. Nothing is started until you have read it and agreed to it. We check Springfield brick and mortar at no charge; call (904) 920-5495 to book.
Springfield is about 6 miles from Jacksonville in a straight line. Springfield is a neighborhood inside Jacksonville city limits.
What's Included
Mortar, brick and the water behind them
- Spalled brick cut out and replaced unit by unit
- Salvaged or matched brick sized to the old coursing
- Racked shoulders washed or capped to shed rain
- Stair-step cracks marked and measured on your Springfield chimney
How It Works
From damage map to cured joints in Springfield
-
Water path traced first
We check the crown, the cap, the shoulders, the weather side and the flashing before pricing joints or brick.
-
Joints raked, bad brick cut out
Worn mortar is raked back to sound depth, and cracked or spalled units come out without thinning the wall.
-
Matched mortar packed and tooled
Pre-hydrated mortar of the type on your estimate goes in, with salvaged or new brick matched for size and color.
-
Brick cleaned the gentle way
Smears come off with a brush and water while they are fresh, and no harsh acid touches the brick.
Local Conditions
What loosens brick and mortar in Springfield
At more than about six miles from the coast, Springfield is far enough inland that salt spray does little to its chimneys. Rain is the main load. Water that runs off a failed crown or enters an open joint washes mortar out from the inside.
Repairs in Springfield close the water path first, then repoint and replace brick.
10% off your first service when you book today
Loose brick or crumbling mortar? Book today and save 10% on your first service.
Marking a crack to see if it is still moving
Some cracks are old and stable; others are still opening. Telling them apart can take time. A simple method is a pencil line and a date at both ends of the crack, plus a width reading at one marked point. On a later visit the marks show whether the crack has grown longer or wider.
A small plastic crack monitor fixed across the crack does the same job with a scale. A stable crack is repaired as a joint or unit repair. A moving one gets its cause found first, since mortar alone will not hold it. The readings are dated, so the next check compares like with like.
No raw muriatic acid on the finished wall
Mortar smeared on brick faces during repair has to come off, and what it comes off with can do more harm than the smear. The Brick Industry Association's stain note lists straight hydrochloric acid, the product sold as muriatic, and hydrofluoric acid among the causes of white silicate scum and of yellow or green vanadium stains on pale brick. Neither stain rinses away. So smears are brushed off with clean water while the mortar is still green, within the same working day. If a cleaner is needed after that, it is a product the brick maker's guidance allows, tried on a hidden spot first and rinsed off thoroughly.
Salvaged brick from the same chimney
The closest match to the brick in a chimney can be more of the same brick. When the top of a stack is relaid, sound units from the dismantled courses are cleaned of old mortar and reused. When only a few units are needed, brick can sometimes be taken from a part of the chimney that is hidden, such as inside the attic, and replaced there with a new unit where color does not matter. Salvaged brick has already weathered with the rest of the stack, so it blends in sooner than new brick does. Salvaged units are checked for cracks and soft faces before they are reused.
Free Inspection
Mortar type, brick source and joint depth
- Map of each damaged area on the stack, with its size
- Joint raking depth and the tool used at the head joints
- Number and location of brick units to cut out and replace
- Clearance to framing kept open where the chimney passes the attic
FAQ
Masonry questions from Springfield
Can you repair only the damaged part of the chimney?
Yes, where the rest of the stack is sound. We repair the areas that have failed and close the water path that caused them. The estimate shows each area separately, which makes it clear what is included.
Can masonry work be done in the rain?
Not well. Fresh mortar needs protection from heavy rain while it cures, so we schedule around the forecast and cover open work at the end of each day.
Our Services
More services in Springfield
-
Fireplace Installation New and replacement fireplaces, factory-built or masonry, with their chimneys.
-
Gas Fireplace Repair and Service Gas units that will not light, stay lit or burn right, plus service.
-
Gas Fireplace Installation Direct-vent and B-vent gas fireplaces, framed and vented to the manual.
-
Chimney Repair Any failed part of the chimney, found, named and fixed in a sensible order.
-
Chimney Sweep and Chimney Cleaning Soot and early creosote brushed out of the flue, smoke chamber and firebox.
-
Chimney Leak Repair Water coming in at the chimney, traced by testing and stopped where it enters.
Learn more about chimney masonry repairAll services in Springfield
Crumbling mortar, free look
New mortar is matched to your old brick in hardness and color, and the mix is named on the estimate for your home in Springfield.
Free Inspection