
Local chimney crown repair for Springfield homes
For Springfield chimneys, a crown that sheds water, sloped and overhanging, with a drip edge and a bond break at the flue. The inspection is free.
- Family owned and operated
- Free inspection and estimate
- Same-day service available
- Upfront pricing, no hidden fees
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
or call (904) 920-5495
Why Choose Us
Chimney crown pros who check before they seal or recast
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off when you book today
Hairline cracks on a sound slab get sealed, which keeps the job smaller and the price lower.
- Free inspection and estimateWe map the cracks on your Springfield crown and check the brick under it at no charge.
- Upfront pricing, no hidden feesCoating and recasting are both priced on paper, so you see the difference before choosing.
- 100% satisfaction guaranteedIf the finished crown is not right, tell us and we come back to put it right.
Starting with what is actually up there
The first job on a crown call in Springfield is finding out what the top of the chimney actually is. It may be a mortar wash troweled around the flue, a concrete crown cast in place, or a precast slab set on a mortar bed. From the roof we can tell which, and the answer shapes everything that follows.
A wash and a cast crown fail differently and are repaired differently. So the first line of the estimate names the type, the second maps the cracks, and only then does it propose a coating, a patch or a new crown. Cracks on top of the chimney in Springfield? Our masons tell you coat or recast after one look, so call (904) 920-5495.
Springfield lies roughly 6 miles from Jacksonville, measured directly rather than by road. Springfield is a neighborhood inside Jacksonville city limits.
What's Included
Crown repair jobs we handle in Springfield
- Forms set with an overhang past every face of the brick
- Drip groove cast under the overhang
- Chimney cap refastened once the new crown can hold it
- Coat or recast decision for your Springfield crown in writing
How It Works
From crack map to cured crown in Springfield
-
Crown checked from the roof
We look at the slab, the brick right under it and the seal around each flue, then write down the option that fits with its price.
-
Old top cleaned or torn off
For a coating, the crown is cleaned and the wider cracks filled. For a recast, the old top comes off down to sound brick.
-
Coating brushed on or crown poured
A coating goes on in dry weather inside the maker's temperature range. A recast is formed with a slope, an overhang, a drip groove and a sealed joint at every flue.
-
Curing, then the cap goes back
New concrete stays covered and damp while it cures. The cap is refastened once the crown can hold it, and we show you the finished top.
Local Conditions
What cracks crowns in Springfield
Crowns in Springfield sit inland, away from most of the salt. Water and heat do the damage. Rain sits on a flat top and finds each hairline crack, and the flue tile expands against a crown poured tight around it.
The repair answers both: slope and a drip edge for the water, a sealed bond break at the flue for the heat.
10% off your first service when you book today
Cracked chimney crown? Call today and your first service is 10% off.
How far the flue tile stands above the crown
Once the crown is finished, the flue tile should stand clear above it. The BIA's chimney note has the liner stand 2 inches or more proud of the cap, which keeps water running across the crown from spilling over the rim into the flue.
A tile cut flush with the crown, or buried in it, fails that test. When a tile is too short, the options are a new top tile or a crown shaped lower around it, and the tile's condition decides which applies. Tile height is measured from the finished crown surface instead of the old top that came off.
Fastening the cap to a new crown
A chimney cap has to be held down against wind, and how it is held matters to the crown. Screws driven down through the crown make holes that need sealing and can let water into the core of the chimney.
Where the cap design allows, its mount grips the flue tile instead, leaving the concrete with no holes in it. Where a cap must be fixed to the crown, the fasteners go in only after the concrete can take them, into sealed holes, and how the cap is attached is recorded. A cap that has worked loose before is checked for why.
Why crowns are cast in concrete
Crowns are concrete elements, and they should be made from concrete: cement, sand and coarse aggregate in proportions made for strength and durability. Bricklaying mortar is a different material, designed to be weaker than the brick so joints fail first, which is the opposite of what a crown needs.
We use a concrete mix suited to a thin cast element with reinforcement, and we name it. Mortar washes built from leftover mortar at the end of a chimney job are one reason crowns crack early. The mix is placed in one pour so there are no cold joints across the top.
Free Inspection
Coat or recast, and the reasons
- Repair method chosen, coating, patch or recast, with the reason
- Coating product class and the data sheet's weather window
- Overhang, drip groove and slope for the new crown
- Reinforcement and concrete mix for a cast crown
FAQ
Crown repair questions from Springfield
Can I tell from the ground whether my crown is a mortar wash?
Sometimes. A thin gray layer that tapers to the edge with no overhang is likely a wash, while a thicker slab that projects past the brick is likely a cast crown. We confirm it from the roof.
Does crown work mean the chimney cap comes off?
For a recast, yes. For a coating, it depends on how the cap is mounted. The estimate says which applies to your chimney.
Our Services
More services in Springfield
-
Chimney Masonry Repair Cracks, open joints and damaged brick repaired with matched mortar.
-
Chimney Cap Installation and Replacement Rain, animals and embers kept out of the flue by a fitted cap.
-
Chimney Repair Any failed part of the chimney, found, named and fixed in a sensible order.
-
Fireplace Installation New and replacement fireplaces, factory-built or masonry, with their chimneys.
-
Chimney Chase Cover Replacement A rusted or ponding chase top replaced with one that drains.
-
Gas Fireplace Installation Direct-vent and B-vent gas fireplaces, framed and vented to the manual.
Learn more about chimney crown repairAll services in Springfield
Cracked crown, free check
Crown work waits for dry weather, so call (904) 920-5495 early and the job in Springfield is set around the forecast.
Free Inspection