Local chimney cap replacement for Springfield homes
Bent, rusted or missing cap in Springfield? Local pros inspect it free, replace it and check the crown it sits on.
- Family owned and operated
- Free inspection and estimate
- Same-day service available
- Upfront pricing, no hidden fees
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
or call (904) 920-5495
Why Choose Us
Chimney cap specialists who measure in Springfield first
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off when you book today
Birds, rain and embers are all kept out by one cap, and it still leaves room for the fire to draw.
- Free inspection and estimateWe measure every flue on your Springfield chimney at no charge before any cap is ordered.
- Upfront pricing, no hidden feesThe cap model, its metal and the fastening are priced together, so the total is clear.
- Workmanship warrantyOur fitting and fastening carry the workmanship warranty, with the cap maker's terms in writing.
The cap, seen during a sweep
Sweeping a flue means lifting the cap's lid or screen, which makes a sweep visit in Springfield a natural moment to look at the cap closely. Fasteners rusted solid, mesh that crumbles under a fingertip, or a lid that no longer seats flat all show up once the cap is handled. If yours needs replacing, we measure the tile while we are already on the roof and price the cap as a separate line. You decide whether it happens that day or on a later visit, and the sweep is finished either way with the old cap refastened securely in the meantime. Tell us at (904) 920-5495 what the cap on your Springfield chimney looks like now.
Springfield is about 6 miles from Jacksonville in a straight line. Springfield is a neighborhood within the City of Jacksonville.
What's Included
Cap replacement work for Springfield homes
- Every flue tile measured inside and out
- Old or rusted cap removed and hauled away
- Cap on your Springfield home fastened to hold in a storm
- Two-flue chimneys fitted with two caps or one cover
How It Works
Measure, match, clear, fasten
-
Every flue tile measured
On the free visit we measure each tile inside and out, and how far it stands above the crown.
-
Cap picked from the maker's chart
Model, metal grade and screen come from the sizing chart and our own numbers, never from the old cap.
-
Old cap off, new cap fastened
Set screws, a clamp band or masonry anchors are tightened to the maker's instructions, firm enough for a hard blow without cracking the clay.
-
Screen checked, debris hauled off
We check the mesh along every edge, clear out any nest material, haul away the old cap and show you the finished top.
Local Conditions
Two flues on one chimney in Springfield
Chimneys with a fireplace flue and a second flue need a cap for each opening or one cover over both. Separate caps keep each flue independent when one is serviced.
We measure both tiles on your Springfield chimney and put both options in writing.
10% off your first service when you book today
Cap missing or rusted? Book today and save 10% on your first service.
Reading the grade on a stainless cap
Stainless steel is a family of alloys. Cap makers state the grade in their literature, and the grade sets how the cap resists corrosion. Two caps that look alike in a catalog photo can differ in grade and in the gauge of the sheet, and the thinner one dents and flexes more in wind. Both get named before a cap is ordered: the grade the maker specifies and the gauge of the hood and frame. Knowing the grade also tells a future contractor which fasteners and sealants are compatible, which matters when the cap is serviced years from now by someone who was not there when it went on.
What to look for from the yard after a storm
Binoculars and a clear day are enough for a first look after bad weather. Stand where you can see the top of the chimney and check four things. Is the cap still square on the tile, or leaning? Is the lid flat, or lifted at one corner? Is the screen continuous all the way around, or is there a dark gap? Are there fresh rust streaks, screws or metal pieces on the roof below?
Any one of those is a reason to call before the next storm, and none of them needs you on a ladder. If you can, take note of which side of the chimney the damage faces, since it helps us plan the visit.
A flue tile cut level with the crown
Some crowns were poured up to the top of the flue tile, or the tile was cut off level with the concrete. Most single-flue caps need tile standing above the crown to clamp around or seat on, so a flush tile leaves them little to hold. The practical answers are an outside-mount cap that fastens to the crown itself, or a crown repair that re-forms the top with the tile standing proud and a caulked joint around it. We explain both, since the second also corrects a crown detail the chimney design note from BIA treats as standard: the tile standing at least 2 inches above the crown.
Free Inspection
What sets the cap on your estimate
- Fastening method: set screws, clamp band or anchors into the crown
- Crown condition under a full-crown cap, written as its own line
- Hood height above the tallest tile, per the maker's drawing
- Clean-up of old metal, screws and debris from the roof and yard
FAQ
Cap questions we hear in Springfield
Can you tell me which cap I need over the phone?
Not reliably. Tile size, tile height and crown condition decide the cap, and those are measured on the roof. What you describe on the phone helps us bring the right ladder and sizing kit.
Do you install caps on metal chimneys?
Metal chimneys from a fireplace maker take the cap that maker lists for the system, so a replacement comes from the same maker. We identify the model before ordering anything.
Our Services
More services in Springfield
-
-
-
-
-
-
Learn more about chimney cap installation and replacementAll services in Springfield
Replace a missing or rusted cap in Springfield
A cap that fits is ordered to the flue tile, so the first visit in Springfield is for measuring. Book it at (904) 920-5495.
Free Inspection