Local chimney waterproofing in Springfield
Product chosen on a free inspection, cure times kept, glass protected. That is chimney waterproofing in Springfield.
- Family owned and operated
- Free inspection and estimate
- Same-day service available
- Upfront pricing, no hidden fees
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
or call (904) 920-5495
Why Choose Us
Local waterproofing experts for Springfield brick
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off when you book today
We use breathable repellents, so moisture already inside the brick can still dry out.
- Free inspection and estimateWe splash test your Springfield chimney at no charge and tell you if the brick needs treatment at all.
- No hidden feesRepairs and repellent are separate lines, and nothing is added once the spraying starts.
- 100% satisfaction guaranteedIf treated brick still soaks up water where we sprayed, we come back and put it right.
An old sealer gone cloudy or peeling
Some chimneys were coated in the past with a clear product that formed a film: a gloss on the brick that later clouded, whitened or began to peel. That film slows drying and can hold water behind it, and new penetrating repellents do not bond well over it. We look for signs of an old coating on Springfield brick before any product is chosen, and test a small area if it is hard to tell. If the film has to come off first, the removal is priced with its method, following the old coating maker's directions where they are known. Call (904) 920-5495 and our waterproofing pros will test your Springfield brick for free.
Hogan's Creek park system can be found in Springfield. About 6 miles, as the crow flies, separate Springfield from Jacksonville.
What's Included
Test, repair, then treat
- Open joints and cracked brick repaired before treatment
- Windows, skylights and shingles covered before spraying
- Painted or glazed brick left out, as the maker directs
- Treatment day at your Springfield home set for dry weather
How It Works
Splash, repair, patch test, flood
-
Water test on brick and joints
We wet the faces and watch where the brick drinks, and check the crown, cap and flashing for openings.
-
Openings repaired, then cured
Joints, brick, crown and flashing are fixed first, and the data sheet's cure time runs before any treatment.
-
Test patch, then a flood coat
A patch shows how your brick takes the product. Then it goes on from the bottom up with a low-pressure sprayer, wet on wet.
-
Splash test and paperwork
Treated brick should bead water and stay light. You get the product, the faces treated and the cure time in writing.
Local Conditions
Silane or siloxane for Springfield brick
Silanes have small molecules that get into dense surfaces. Siloxanes are larger and bond to the silica in fired brick and mortar, which suits most clay brick chimneys.
The estimate for your chimney in Springfield names the product type and why it fits your brick.
10% off your first service when you book today
Brick staying dark after rain? Book today and 10% comes off your first service.
Absorption through the faces versus water through openings
Masonry takes on water in two distinct ways. Rain can soak slowly through the faces of brick and mortar, spreading as a dark, damp patch across a whole wall. Or it can run in through a specific opening: a crack, an open joint, a failed crown or a gap along the flashing. The Brick Industry Association treats clear repellents as a tool for the first problem, reducing how much the faces absorb, and says little can be expected of them against the second.
So on a chimney we sort the two before anything is proposed. Openings are repaired with mortar, brick or metal. Absorption through sound faces is what a treatment is for.
How a film sealer holds water in brick
Clear products that sit on top of the brick, such as acrylics, stearates, waxes and urethanes, dry into a continuous skin. The skin can span a hairline crack, which sounds like an advantage, but it also chokes the vapor that has to leave the wall when it dries. On a chimney, water arrives from above, from the flue side and through joints as well as through the faces.
If that water cannot escape outward at its normal pace, it stays in the brick longer, and BIA warns that salts can collect under such a skin and harm the face. For that reason we do not use film sealers on chimney masonry.
Protecting windows, skylights and shingles
Silane and siloxane products react with unprotected glass as well as brick, as BIA's note points out, and the note adds that these chemicals can etch glass. The maker of the product we apply adds paint, plants and asphalt-based materials such as roof shingles to the list of things to keep clear. So before any spraying, the glass in windows, skylights and doors close to the stack is covered, the roof surface around it is shielded, and plants below are protected as the directions describe. Any overspray that reaches an uncovered surface is washed off with soap and water straight away.
Free Inspection
Repairs and treatment, priced apart
- Test patch location, and when it will be checked after curing
- Faces treated, and surfaces left out such as the crown top
- Existing sealer or paint identified before any product is chosen
- Efflorescence brushed off dry, with its water source dealt with first
FAQ
Waterproofing questions from Springfield
Is chimney sealing the same as waterproofing?
People use both words for the same job. What matters is the product: we use penetrating repellents that let the brick breathe. Film sealers and paint stay off.
Can the treatment be done the same day as repointing?
No. Fresh joints need at least 72 hours to cure first, according to BIA and the product's data sheet, so treatment is a second visit.
Our Services
More services in Springfield
-
-
-
-
-
-
Learn more about chimney waterproofingAll services in Springfield
Keep rain out of your Springfield chimney
A simple splash test shows whether your brick in Springfield soaks up rain. Call (904) 920-5495 to have our masonry experts run it.
Free Inspection