Call(904) 920-5495

Local hearth repair in Sawgrass

Hearth repair in Sawgrass built on a sound base, with grout, setting mortar and cure time named in writing.

  • Fully licensed and insured
  • Locally owned
  • Family owned and operated
  • Same-day service

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Local hearth repair pros for Sawgrass homes

  • Locally owned in Jacksonville
  • Family owned and operated
  • 100% satisfaction guaranteed
  • Free inspection and estimate
  • Same-day service available
  • 10% off any service

Your estimate in Sawgrass names the setting mortar, the grout and the cure time.

  • Free inspection and estimateYour hearth in Sawgrass is sounded, leveled and measured on a free visit before any price is written.
  • 100% satisfaction guaranteedA tile or stone we set that comes loose is ours to fix, and we return to reset it.
  • Family owned and operatedA family-owned local crew explains each layer of the repair, from the support to the grout line.

Tile cracking along the front edge

When a crack starts at the front edge of the hearth and runs back toward the opening, we look at the slab before the tile. Tile cracks straight through when the bed under it moves or was never full, so new tile on the same bed tends to crack along the same line.

On a hearth in Sawgrass, we tap every tile, check the slab for level and measure the extension before writing anything down. The estimate says whether the fix is a few tiles on a sound slab or a new slab first. Local, family owned and free to inspect, so call (904) 920-5495.

Sawgrass borders the coast. Sawgrass is part of St. Johns County.

From loose tile to a new slab

  • Sunken or tilted extensions leveled on new support
  • Raised hearth caps reset on a sound base
  • Ash dump frames and lids reset or replaced
  • Heat-cracked tile near the opening rebedded

How our hearth pros repair a hearth in Sawgrass

  1. Describe the hearth on the call

    Cracked, hollow, sunken or too small, a short description sets up the free visit and what we bring.

  2. Sounding and measuring

    Each tile is tapped, the slab's level is read and the extension is measured against the opening.

  3. Support first, surface second

    A moving slab or missing support is fixed before tile or stone goes back on a full bed of the named mortar.

  4. Cured before heat, then handed back

    The bed cures before grout and fire, and we show you the finished edge and where the clear zone ends.

Rain at the flue top and stains on a hearth in Sawgrass

Wind-driven rain can enter an open flue top, and on a coastal chimney in Sawgrass the cap and its screen take that exposure first. Water that gets past them lands on the inner hearth.

When a hearth in Sawgrass shows staining at the back, we look up the flue before resetting anything, and the cap or top repair is written as its own line.

10% off any service booked within 72 hours of inspection

A hearth repair booked the same day as the inspection comes 10% off too.

What holds the extension up

An extension has to rest on noncombustible support. Depending on how the house was built, that can be the fireplace foundation carried forward, a slab on the ground, or a masonry or concrete support reaching out over a framed floor. Each fails in its own way: a slab on grade can settle, and support over framing depends on the framing staying put.

Before we price a rebuild, we find out which support your hearth has, from below where a crawlspace allows or by opening the edge. The support type decides whether the new extension can sit on what is there or needs a base of its own.

Matching tile that is no longer made

Hearth tile from a few decades back may be discontinued. A close match from a supplier is one option. Another is to take matching tile from a spot nobody sees, such as under a raised platform, and put the new tile there instead. A third is a deliberate contrast, like a border row in a different tile.

We lay out those choices before any tile is removed, because the wrong order can leave a patch that stands out. If the whole surface has to come up for the slab anyway, a full new finish may be simpler than matching. The estimate prices the options you ask about.

The seam between the inner hearth and the extension

The line where the firebox floor meets the extension separates two parts that heat differently and may rest on different support. A rigid, mortar-filled joint there cracks sooner or later. Some movement is expected, and the joint has to be sized and filled with that in mind.

We clean the joint out, check that neither side has dropped, and fill it with a material suited to the heat on the firebox side. If one side has dropped, the joint is not the repair, and the support below goes on the estimate instead. A filled crack over a moving slab is only cosmetic.

What we check on a hearth in Sawgrass before pricing

  1. Loose units reset on a full bed of the named setting mortar
  2. Grout raked and renewed, product and color written down
  3. Water source above the hearth named and priced as its own line
  4. Hearth pad on a factory-built unit checked against its manual

Before your hearth is lifted

Do you replace only the cracked tiles or the whole hearth?

Only the cracked ones when the slab under them is sound and the tile can be matched. If the slab has moved or the extension is too small, we explain why a bigger repair makes sense and price both.

When can I light a fire on the repaired hearth?

That depends on the setting materials, and each product's data sheet gives a cure time before heat. We write that time on your ticket along with the date the work was finished.

Hearth repair from local specialists in Sawgrass

From a few loose tiles to a new extension, our pros in Sawgrass give you the options and the price in writing.

Free Inspection

Call the chimney and fireplace experts

(904) 920-5495

Free inspection and written estimate

Call (904) 920-5495