Gas fireplace inserts installed in Sandalwood homes
A cleaned chimney, listed liners and a sealed firebox: gas insert installation in Sandalwood done by the manual.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Gas insert experts for Sandalwood homes
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
The barrier screen goes on before the first light.
- Free inspection and estimateThe opening, flue and mantel of your Sandalwood fireplace are measured against the insert's plate at no charge.
- Upfront pricing, no hidden feesInsert, vent kit, surround, cleaning and repairs are priced line by line, and the gas and power trades are named.
- 100% satisfaction guaranteedIf the insert does not light, burn or seal the way its manual describes after our installation, we come back.
Who brings the gas line
The pipe that brings gas to the insert's valve is its own trade, governed by NFPA 54 and Florida's fuel gas rules, and it is done by a gas contractor, the gas company or whoever supplies the propane. It is sized to what the insert's rating plate calls for.
Their part goes on the estimate with its timing, and our connection and testing follow once gas reaches the valve, so nobody works outside their trade. Natural gas or propane at your Sandalwood house? Tell us when you call (904) 920-5495.
Sandalwood is inland. Sandalwood is a neighborhood inside Jacksonville city limits.
Liners, surround, gas and power
- Chimneys cleaned before any gas appliance connects
- Old gas inserts replaced, liners checked for reuse
- Power-outage behavior explained before you buy
- Yearly service set up from the first day
From wood fireplace to gas insert in Sandalwood
-
Measure against the plate
Opening, flue and mantel are checked against the insert's rating plate and manual.
-
Clean and check the chimney
The old flue is cleaned, examined and repaired if needed before the liners go up.
-
Liners, insert, surround
The vent kit runs to its termination, the insert is set and the surround fitted.
-
Hookups and first light
The gas and electrical hookups are made, then we light and test the insert with you.
Yearly service inland in Sandalwood
Well inland, a gas insert in Sandalwood still needs its yearly inspection: burner, liners, termination and glass seal.
We can set that up on install day.
10% off any service booked within 72 hours of inspection
Liner, insert and the light-up checks at your Sandalwood home are all discounted.
The opening the insert needs
Gas inserts list the smallest fireplace they fit. One maker's rating plate gives a minimum width of 28 5/8 inches, a height of 20 15/16 inches and a depth of 14 3/8 inches for its model.
Fireplaces taper toward the back and the top, so we measure at the narrowest points rather than only across the front. The measurements go on the estimate beside the figures for the model you like, and where one dimension falls short, we look for a model that fits rather than cutting into the fireplace to make room for it. A tape at the back corners tells more than one at the front.
The termination at the top
At the chimney top, a co-linear system ends in a termination listed for that vent kit, set in its own flashing over the old flue. The termination keeps intake and exhaust apart so the insert does not draw in its own exhaust.
We check the chimney top before ordering, since the termination and its flashing sit on it. A cracked or loose top is repaired first. Once installed, the termination is fixed as its instructions show, and the ticket records the kit used. A termination blocked by debris gets checked early on any later service call.
Pressure relief doors stay closed
Some gas inserts have pressure relief doors, which let the firebox vent a sudden pressure rise. One maker warns that these doors must be kept closed while the appliance runs, because exhaust containing carbon monoxide could otherwise enter the home, and the hot gases could overheat nearby materials.
On install day we check that relief doors seat properly and show you what they look like, so no one props one open or removes it. A relief door that will not stay closed is a reason to shut the insert off and call for service. They are part of the design, not a loose panel.
Opening, flue and mantel on paper
- Inside flue size and route checked for the liners
- Chimney examined and cleaned before any gas appliance connects
- Mantel height and projection measured against the plate
- Outlet position behind the surround, wired by an electrician where needed
Gas insert questions from Sandalwood
Can I keep my mantel?
Yes, when its height suits its depth under the insert's figures. Otherwise the choice is another model, a higher mantel or a noncombustible one, settled before ordering.
Does a gas insert need yearly service?
Yes. Makers want a yearly check of the insert and its venting by someone qualified, and we can put that on the calendar from the day it goes in.
More services in Sandalwood
-
-
-
-
-
-
Learn more about gas fireplace insert installationAll services in Sandalwood
Switch your Sandalwood fireplace to gas
Have the insert model ready when you ring (904) 920-5495, and our experts check it against your Sandalwood fireplace.
Free Inspection