Local chimney inspection in San Jose
The yearly check under NFPA 211, done free in San Jose without a sales pitch and without skipping the parts you cannot see.
- Family owned and operated
- Free inspection and estimate
- Same-day service available
- Upfront pricing, no hidden fees
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
or call (904) 920-5495
Why Choose Us
Inspection pros who explain every finding in San Jose
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off when you book today
Gas vents and stove connectors are followed end to end, since they share the chimney.
- Free inspection and estimateThe chimney inspection at your San Jose home costs nothing, and a clean result is reported as clean.
- Locally owned and operatedA locally owned business shows you what it sees, so the findings are yours to check.
- No hidden feesAny repair that comes out of the inspection gets its own line and price before you decide.
What an inspection leaves out
An inspection observes and records. It leaves the flue unbrushed unless a sweep was booked, and it repairs nothing, even small items, so the findings stay separate from any sale. It does not judge the roof covering beyond the chimney's own flashing, which is a roofer's field.
A gas appliance itself is serviced separately, to the maker's manual, and nothing sealed is opened without your go-ahead. If a finding needs a specialist outside chimney work, it is flagged as such. Knowing the edges of the job helps you read the San Jose findings for what they are. Our inspection pros cover San Jose; call (904) 920-5495 and the visit is free.
San Jose sits in Duval County. San Jose is inland, more than about six miles from the coast.
What's Included
The whole system, firebox to cap
- Hearth extension measured against the opening
- Damper worked through its full travel
- Brick and joints above the roofline looked over
- Attic airspace and fireblocking checked where reachable
How It Works
From firebox to cap in San Jose
-
Firebox, damper and throat first
We start where the fire sits, checking the firebrick, the hearth, the damper and the chamber above it.
-
Flue checked end to end
A strong light and a mirror from below, and a look from the top where footing is safe, show the full run of tile.
-
Clearances, attic and roof
Gaps to framing are measured where we can reach them, then the crown, cap, flashing and height are checked up top.
-
Findings shown, repairs ranked
You see each finding on site, and any repair goes on a written estimate ranked by how soon it matters.
Local Conditions
A fireplace unused for years in San Jose
A fireplace that has not been lit in years may hide nests, fallen tile or a damper rusted shut.
Before the first fire in a home like that in San Jose, the inspection checks every part from the firebox to the cap.
10% off your first service when you book today
Your free inspection in San Jose comes with 10% off the first job we do.
Open joints between flue tiles
Clay flue tiles are set end to end in refractory mortar, and the code wants those joints tight and smooth inside (FBC R1003.12). Over time the mortar erodes and a gap opens. Through it, heat reaches the brick behind the tile, and flue gases and condensate soak into the masonry.
Gaps show as dark rings around the tile, or as missing mortar when the flue is viewed with a strong light. A single open joint near the top is a different finding from open joints along the whole flue, and the finding states which one this is. Joints just above the smoke chamber get extra attention, since they meet the hottest gases.
Hairline or through-brick cracks in the firebox
Firebrick takes the direct heat of the fire, and fine crazing on its face is normal wear. What matters is a crack that runs through the brick, a joint that has opened, or a back wall that has bulged or loosened. Those let heat reach the masonry behind the firebox, and in some fireplaces the framing beyond it.
Each is noted by location and size. Loose or missing firebrick and failed refractory joints are recorded as firebox repair, and a gap that reaches through to the outer masonry goes to the top of the list. Crazing on its own is simply noted as wear.
Checking the hearth extension against the opening
The hearth extension is the noncombustible floor in front of and beside the fireplace, and its size follows the size of the opening. For an opening smaller than 6 square feet the code asks for 16 inches in front and 8 inches to each side; at 6 square feet or more, 20 inches in front and 12 to each side (FBC R1001.10).
The inspection measures the opening and the extension, and checks the extension for cracks or loose tiles that could let an ember reach wood below. A short extension is recorded with the amount it falls short by. Raised hearths are measured the same way, at floor level in front.
Free Inspection
Firebox, flue, roof and attic
- Firebrick, mortar joints and back wall checked for cracks that pass through
- Flue tiles and joints viewed from both ends where access allows
- Cap fit, fasteners and screen condition checked on each flue
- Written estimate listing each finding, its repair and its urgency
FAQ
Inspection questions from San Jose
Do you inspect chimneys in San Jose?
We do inspections in San Jose. Tell us why you want one and what the fireplace burns, and we plan the visit around that.
Do I get the findings in writing?
Yes. After they are explained on site, anything that needs work is written up on an estimate, one finding per line, with its repair and its urgency.
Our Services
More services in San Jose
-
-
-
-
-
-
Learn more about chimney and fireplace inspectionAll services in San Jose
Firebox to cap, free
Every finding on your chimney in San Jose is written down and ranked, safety items first.
Free Inspection