Chimney chase cover replacement in San Jose by local pros
Ponding, rust or a lifted edge on a chase top in San Jose? Our local crew inspects it free and fits a cover made to measure.
- Family owned and operated
- Free inspection and estimate
- Same-day service available
- Upfront pricing, no hidden fees
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
or call (904) 920-5495
About Us
Chase cover pros San Jose neighbors can call direct
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off when you book today
One local team takes your San Jose chase from the tape measure to the hose test, with no hand-off to a subcontractor.
- Free inspection and estimateWe measure your San Jose chase and look under the old top at no charge before anything is quoted.
- Upfront pricing, no hidden feesMetal, gauge and any framing repair each get their own priced line, and that total is what you pay.
- Workmanship warrantyThe new top, its collars and its fasteners are covered by our workmanship warranty, written on the estimate.
Chase cover or chimney cap, which one failed
Two metal parts sit at the top of a framed chase. The chase cover is the flat sheet that closes the top of the box. The termination cap is the smaller hooded part on top of the chimney pipe, which is a listed component of the chimney system. Either can rust or leak, and they are replaced differently: the cover is made to measure, and the cap comes from the fireplace maker. We identify which part failed on the San Jose roof before writing anything, and the two are priced as separate lines, so the price of one is not tucked inside the other. A chase cover specialist can be up on your San Jose roof with a tape measure soon after you phone (904) 920-5495.
San Jose lies inland, over six miles from the coast. Counted as a direct line, Jacksonville and San Jose are roughly 2 miles apart.
Our Services
Your new chase top in San Jose, part by part
- New top pitched or cross-broken so rain runs to the edges
- Raised collar formed at every pipe hole
- Screws set through the skirt sides into the framing
- Garden hose test on the finished top where footing is safe
How It Works
How our chase cover pros replace a top in San Jose
-
Chase and pipe measured
On the free visit we measure the outside of the chase over the siding and read the fireplace model from its plate or manual.
-
A top made to your chase
The cover is formed with cross-breaks or a pitch, a skirt with a drip edge and a raised collar sized to your pipe.
-
Old top off, new top fastened
We pull the old cover and check the framing, then fasten the new top through its skirt and clamp a sealed storm collar at the pipe.
-
Hose test before we leave
Water run over the new top has to leave from every edge. If it puddles anywhere, we reshape it before the job is done.
Where We Work
Wet framing under San Jose chase tops
Summer storms soak whatever sits under a failing chase top, and wet framing dries slowly inside a closed box. By the time a stain shows indoors in San Jose, the top plates may have been wet for months.
When the old cover comes off, we probe the plates and sheathing, show you what we find, and price any framing repair separately.
10% off your first service when you book today
First job with us? Your new chase cover comes with 10% off.
Skirt depth and the drip that clears the wall
The skirt is the part of the cover that turns down over the sides of the chase. It needs enough depth to cover the joint between the top of the siding and the framing, and enough to take fasteners below that joint.
At its bottom edge it ends in a drip: a small outward kick that throws water clear of the wall instead of letting it run back underneath. Fireplace manuals call for a turndown and drip edge on the chase top for exactly that reason. A skirt that stops short, or ends flush against the siding, leaves the top of the wall to take the water.
Cross-breaks, the creases that move water
Cross-breaks are shallow creases pressed into the sheet from corner to corner, forming a low X. They do two things. They stiffen a flat panel so it does not sag between its edges, and they give the surface four gentle slopes that fall from the center toward the sides.
On a chase top that means water runs away from the pipe collar and off the drip instead of pooling. Cross-breaks suit tops with the pipe near the center. When the pipe sits off to one side, a top with a fabricated pitch can do the same job more evenly, and we say which shape we will build and why.
The gap that stays open around the pipe
Between the chimney pipe and the collar there is supposed to be a small gap. One manual specifies 1/8 inch, and it carries a fire-risk warning against filling it. The pipe of a factory-built chimney heats and cools, grows and shrinks, and relies on its air spaces to stay within its listed temperatures. Filling the gap ties the pipe to the sheet metal and can hold heat and water where neither belongs.
So the gap is left open, and the storm collar above it is what keeps rain out. If we find the gap filled on an old top, we clear it and note it.
Free Inspection
Measured and noted on San Jose chase tops
- Cross-breaks or a fabricated pitch, and the slope it gives
- Listed termination cap reused, or replaced with the maker's part
- Framing and sheathing condition under the old top, priced separately
- Water test of the new top where the roof allows safe footing
FAQ
Before you order a new chase top
Can you order a chase cover from my measurements?
We measure on the roof ourselves. The cover has to fit over the finished siding and match the pipe positions exactly, and small errors leave gaps where water gets in.
Why not just seal around the pipe?
Filling that ring ties a hot pipe to the sheet metal, and the manuals leave it open for that reason. Rain is kept out by the storm collar above the ring, which is sealed to the pipe itself.
Our Services
More services in San Jose
-
-
-
-
-
-
Learn more about chimney chase cover replacementAll services in San Jose
A drained, fitted chase top for San Jose
Talk to a local family team of chase cover pros about your San Jose chase. The inspection is free and the estimate is written on site.
Free Inspection