Local chimney crown repair in Palm Valley
Each new Palm Valley crown gets a proper bond break at the flue tile, so heat from the flue cannot crack it. Crown checks are free.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Crown repair experts for Palm Valley chimneys
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
The crack map for your Palm Valley crown and the reason for our choice go on the estimate.
- Free inspection and estimateWe map the cracks on your Palm Valley crown and check the brick under it at no charge.
- Upfront pricing, no hidden feesCoating and recasting are both priced on paper, so you see the difference before choosing.
- 100% satisfaction guaranteedIf the finished crown is not right, tell us and we come back to put it right.
Lining up other jobs with the crown
Other chimney jobs can line up with crown work. A new cap is easiest to fit on a new crown. A relined flue needs its top plate sealed to the crown. Flashing and repointing below the crown use the same access.
Several of those on one Palm Valley chimney get sequenced from the top down, so nothing is disturbed twice, and each is its own line. You can still choose to do only the crown, and we point out what that leaves open. A single set of access, ladders and roof protection serves every line. If you hold an item back, you also hear whether its access would have to be set up again later. Call (904) 920-5495 with your Palm Valley street, and we will book a dry-weather visit to the crown.
Palm Valley is part of St. Johns County. Palm Valley had 21,827 residents at the 2020 Census.
Crown repair jobs we handle in Palm Valley
- Flue tiles taped so the coating ends in a clean line
- Drip groove cast under the overhang
- Reinforcement placed inside the slab to control cracking
- Chimney cap refastened once the new crown can hold it
How crown repair runs
-
Crack map from the roof
We identify the type of top and sketch each crack with its width, so the choice between coating and recasting is based on what is there.
-
Prep for coating or removal
A sound crown is cleaned and its wider cracks filled; a failed one is broken out down to sound brick.
-
Coat, or form and pour
The coating is brushed on in dry weather, or new concrete goes into forms with an overhang, a drip groove and reinforcement.
-
Cure, seal and refit the cap
The bond break at each flue is sealed, the concrete cures under cover, and the cap goes back on.
Crowns and storm season in Palm Valley
From June 1 to November 30 a crown in Palm Valley takes wind and heavy rain near the coast. Cracks that were hairline in spring can open after a season of storms.
We check the crack map against the last one, and a crack that has grown is sealed or the crown is recast before the next season.
10% off any service booked within 72 hours of inspection
Seal or recast, crown repair in Palm Valley earns the 10% discount.
Hairline, open and through cracks
Crown cracks come in three broad kinds. Hairline cracks are surface lines you can see but not fit a fingernail into. Open cracks have width and depth, and water pools in them. Through cracks run the full thickness of the slab, so a piece moves when pressed or water drains straight into the chimney.
Hairline cracks on a sound crown are the case for a coating. Open cracks need filling first, and a coating after. Through cracks, especially several of them, mean the crown has become separate pieces, and the reliable repair is a new crown. The crack map records which kind each crack is.
Crowns around more than one flue
When a chimney has two or more flues, the crown has to drain between them as well as off the outside edges. The space between flue tiles is a natural low point, and a flat area there will hold water against both tiles.
Each tile needs its own bond break and its own check for height and cracks. Where the tiles are close together, forming the crown between them takes care so the concrete fills fully without voids. A cap that covers several flues sits on the finished crown, and its fastening is planned before the pour. Each flue's findings are recorded separately.
Fastening the cap to a new crown
A chimney cap has to be held down against wind, and how it is held matters to the crown. Screws driven down through the crown make holes that need sealing and can let water into the core of the chimney.
Where the cap design allows, its mount grips the flue tile instead, leaving the concrete with no holes in it. Where a cap must be fixed to the crown, the fasteners go in only after the concrete can take them, into sealed holes, and how the cap is attached is recorded. A cap that has worked loose before is checked for why.
Measured on the crown in Palm Valley before pricing
- Flue tile height above the finished crown
- Chimney cap removal and reinstallation, with how it is fastened
- Rain protection for fresh concrete while it sets
- Debris removal from the roof and gutters after the work
Before your crown is coated or recast
Can I tell from the ground whether my crown is a mortar wash?
Sometimes. A thin gray layer that tapers to the edge with no overhang is likely a wash, while a thicker slab that projects past the brick is likely a cast crown. We confirm it from the roof.
Does crown work mean the chimney cap comes off?
For a recast, yes. For a coating, it depends on how the cap is mounted. The estimate says which applies to your chimney.
More services in Palm Valley
-
-
-
-
-
-
Learn more about chimney crown repairAll services in Palm Valley
Have the crown on your Palm Valley chimney looked at
A local crown specialist climbs up, checks the slab in Palm Valley and leaves a written price the same visit.
Free Inspection