Local fireplace insert installation in Palm Valley
Your Palm Valley insert installation priced in writing, part by part, with repairs listed first and no hidden fees.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Wood insert experts for Palm Valley homes
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Our family business walks you through insert options for your Palm Valley fireplace before pricing anything.
- Free inspection and estimateYour Palm Valley firebox, chimney height and hearth are measured against the insert's manual at no charge, before anything is ordered.
- Upfront pricing, no hidden feesEvery part of the job is priced before ordering, from repairs to the rain cap, and nothing is added without your yes.
- 100% satisfaction guaranteedIf the insert smokes or draws poorly after installation to its manual, we come back and set it right.
Using the old ash door for outside air
Some masonry fireplaces have an ash door in the firebox floor with a chamber below it. Certain inserts can use that route to draw combustion air from outdoors, which keeps the fire from pulling air out of the room. It suits a tight house with strong exhaust fans in particular.
Whether your fireplace allows it depends on where that chamber leads and whether it is clear, which we check on the visit. Local codes can also have a say in combustion air. Fireplace with an ash door in Palm Valley? Ask us about outside air at (904) 920-5495.
The 2020 Census counted 21,827 residents in Palm Valley. Palm Valley is near the coast without touching it.
Liner, surround, clearances and hearth
- Listed wood inserts installed to their manuals
- Surrounds sealed or left open per the manual
- Older unlined inserts reconnected to a liner
- EPA Step 2 labels checked on every new insert
From tape measure to first fire in Palm Valley
-
Measure against the manual
Firebox, chimney height, hearth and clearances are checked against the insert's table before ordering.
-
Repair and clean first
Fireplace repairs are made and cured, and the flue is cleaned before the liner goes up.
-
Liner, plate and cap
A listed stainless liner runs to the top, closed with a top plate and a rain cap.
-
Set, seal and fire
The insert and surround go in as the manual directs, and the first fire is run with you.
Stainless near the water in Palm Valley
Insert liners are stainless, which suits a chimney within a few miles of the coast. The top plate, its sealant joint and the cap screen are still the parts we watch in Palm Valley.
Their condition goes on the ticket at each visit.
10% off any service booked within 72 hours of inspection
Insert measured through us in Palm Valley? Book it inside three days and 10% comes off.
What the UL 1482 listing covers
Wood-burning inserts go through UL 1482, the United States test for solid-fuel room heaters. The listing ties the unit to its installation instructions: the fireplaces it may go into, the clearances around it, the hearth protection in front and the chimney connection it needs.
That makes the manual part of the installation, not a leaflet in the box. We work from the manual of the exact model, and when a fireplace does not meet a figure in it, we say so rather than bending the figure. The listing label on the insert shows the model and serial number, and both go on the ticket.
The federal smoke limit on a new wood insert
Federal rules for wood heaters, 40 CFR Part 60, Subpart AAA, cover inserts. The Step 2 limit covers units made on or after May 15, 2020, and any sold at retail from that date: no more than 2.5 grams of particulate an hour in a cord wood test, or 2.0 grams in a crib wood test.
A permanent label on the insert states that it meets the limit, and we read it before an insert goes in. A unit that meets Step 2 burns cleaner than older designs, but it still needs dry wood and the right air setting to do so, which is part of the walk-through on install day.
The hearth and floor protection in front
Embers can fall when an insert's door opens, so its manual sets the protection in front. One maker calls for a noncombustible fireplace hearth raised 2 inches above a combustible floor projecting 16 inches toward the room and 8 inches to either side of the opening, allowed flush with the floor only if it reaches at least 23 1/2 inches out.
The same manual asks for noncombustible ember protection 16 inches to the firing side and 8 inches to the other sides of the insert. We measure your hearth and floor against your model's figures and price any extension or protection needed.
Fireplace, flue and hearth on paper first
- Top plate trimmed, seated and sealed, with a rain cap on the liner
- Damper locked open or removed, and what the manual lets us trim
- Hearth depth and ember protection checked against the manual
- Outside air through the ash chamber where the fireplace allows it
Wood insert questions from Palm Valley
Do I need a full liner for an insert?
Insert manuals allow a full liner or, where they permit it, a short positive connection. The full liner drafts better and is easier to clean, and it is what we recommend and price first.
Can I keep my mantel?
Often, if it clears the distance on the insert's label. When it does not, you pick a model with smaller clearances or rework the trim, and we measure before you order.
More services in Palm Valley
-
-
-
-
-
-
Learn more about wood-burning fireplace insert installationAll services in Palm Valley
A wood insert that fits your Palm Valley fireplace
Our insert pros measure your Palm Valley firebox and chimney against the manual before you buy. Call (904) 920-5495.
Free Inspection