
Local chimney rebuild for Oceanway homes
Planned before the first brick comes off, your Oceanway rebuild has its take-down line, flue, height and crown set during a free inspection.
- Family owned and operated
- Free inspection and estimate
- Same-day service available
- Upfront pricing, no hidden fees
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
or call (904) 920-5495
Why Choose Us
Local rebuild experts for Oceanway chimneys
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off when you book today
The take-down line, the flue plan and the finished height for your Oceanway chimney are written down.
- Family owned and operatedOur family business takes your Oceanway chimney down by hand and lays it back up itself.
- Upfront pricing, no hidden feesThe take-down line, flue plan and crown are priced before the first brick comes off.
- Workmanship warrantyFrom the new courses to the counterflashing, the rebuilt stack carries our workmanship warranty.
Cure, cap and first fire after the rebuild
New mortar and a cast crown need time to cure before they carry weight, heat or water, and the product data sheets set that time. The cap and any liner top plate go on after the crown has cured, so their fasteners do not crack green concrete.
The first fire comes last: a small one, watched, to confirm the draw through the rebuilt flue. You know in advance the date your Oceanway chimney can be used again, and the written record lists what was built. Keep that record with the house papers for the next inspection. Chimney leaning in Oceanway? Our masons mark where sound brick starts, and it takes one call to (904) 920-5495.
The county for Oceanway is Duval County. Oceanway sits inland, more than about six miles from the coast.
What's Included
Rebuild work around Oceanway
- Counterflashing let into the new joints as the stack rises
- Crown cast with an overhang, drip edge and bond break
- Cap anchored once the crown has cured
- Take-down line for your Oceanway chimney stated in courses
How It Works
From take-down line to cured crown in Oceanway
-
Take-down line marked
We test each row of brick from the top down and mark where sound brick starts.
-
Old brick taken down by hand
The flue is covered and the roof protected, then brick comes off a row at a time, with sound brick saved to relay.
-
Relaid plumb around the flue
Brick goes back in matched mortar with tooled joints, around new clay tile or ready for a listed liner, and is flashed into the roof.
-
Crown cast, cap on last
A new crown with an overhang and a drip edge cures before the cap goes on and the first fire is lit.
Local Conditions
Counterflashing set as the stack rises in Oceanway
A rebuild passes the roof line course by course, which is the moment to set counterflashing into the bed joints or cut a clean reglet once the masonry cures.
On rebuilds in Oceanway, the counterflashing is part of the masonry work.
10% off your first service when you book today
A rebuild booked today for your Oceanway home comes with 10% off a first service.
Brick size and the line of the courses
Bricks are made in more than one size, and an older chimney may have been built with brick that differs from sizes sold today. If new brick is taller or shorter than the old, the courses drift out of line with the masonry that stays, and the joint at the junction shows.
So new brick is matched by height and length before color. Where an exact size cannot be found, joint thickness is adjusted within reason to bring the courses back into line. The sizes are checked with a tape on the roof before any brick is bought.
Setting new clay tile in a rebuilt stack
When the rebuild uses clay flue tile, each section is set in medium-duty, water-insoluble refractory mortar to ASTM C199, with tight joints struck smooth on the inside so they do not catch deposit. The tile is supported on all sides.
It is not mortared solid to the brick around it. The code calls for an airspace, or insulation no thicker than the tile itself, between the tile and the inner face of the chimney wall (FBC R1003.12), so the tile can expand with heat without cracking the masonry. Each tile is checked for plumb and a clean joint before the next course of brick rises around it.
Measuring the finished height
Before the crown is cast, the rebuilt stack's height is checked against FBC R1003.9: a minimum of 3 feet above its highest roof penetration, and a minimum of 2 feet above anything on the house inside a 10-foot circle.
The 10-foot measurement is taken around the chimney in every direction, including toward dormers, a steeper roof section or an addition. A tape and a level from the roof deck give the numbers; nothing is judged by eye.
If the old top was short, the extra courses go on before the crown is cast, so the new height is built in rather than added later. The measurement and the reference point used are recorded.
Free Inspection
Take-down line, flue and crown plan
- Replacement brick chosen for size, then for color and surface
- Mortar type chosen from ASTM C270 to suit the brick and exposure
- New clay tile in refractory mortar, or space left for a listed liner
- Clearance to framing and fireblocking checked where the stack passes through
FAQ
Rebuild questions from Oceanway
How long does a chimney rebuild take?
It depends on how far down the take-down goes, the flue work and the weather, plus cure time before the cap and first fire. The estimate gives a schedule with the working days marked.
Will a roofer be involved in the rebuild?
Sometimes. The rebuild includes counterflashing set into the new joints, but base flashing woven into the roofing, a cricket, or roofing repairs may need a roofer; each is assigned on the estimate.
Our Services
More services in Oceanway
-
Chimney Animal Removal Animals and nests cleared from the flue, debris cleaned out, entry closed off.
-
Chimney Cap Installation and Replacement Rain, animals and embers kept out of the flue by a fitted cap.
-
Chimney Liner Installation and Relining A listed stainless liner sized to the appliance and run the full flue height.
-
Chimney Crown Repair The concrete top of the chimney, sealed or recast so it sheds water again.
-
Chimney Masonry Repair Cracks, open joints and damaged brick repaired with matched mortar.
-
Chimney Sweep and Chimney Cleaning Soot and early creosote brushed out of the flue, smoke chamber and firebox.
Leaning top, free check
A leaning or loose top should not wait for the next storm. Call (904) 920-5495 and our rebuild experts come out to Oceanway.
Free Inspection