Local storm damage chimney repair in Oakleaf Plantation

Storm debris in the flue, a torn spark screen or lifted flashing, fixed in Oakleaf Plantation by local chimney specialists.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Local chimney pros who make it safe first in Oakleaf Plantation

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

Impact damage is kept separate from wear the chimney already had.

Free inspection and estimateAfter a storm, your chimney in Oakleaf Plantation is checked from the top down at no charge.
24/7 emergency lineThe 24/7 line is answered when the storm damage cannot wait for business hours.
100% satisfaction guaranteedIf a permanent repair we made does not hold the way we said, we come back and fix it.

Call (904) 920-5495 Free Inspection

An antenna mount that pulled on the brick

Antenna and dish mounts strapped or bolted to a chimney act like a lever in wind. After a storm, the mount may have twisted, pulled its anchors out of the mortar or cracked the top courses it was fixed to. A mount that has shifted can also crack the crown if its straps were anchored there.

We check the chimney in Oakleaf Plantation where the mount was attached and recommend moving it off the chimney when the masonry cannot take the load. Removing a mount and repairing the brick under it are priced as separate lines.

The coastline lies beyond Oakleaf Plantation. Oakleaf Plantation is part of Clay County.

Storm damage repairs we handle in Oakleaf Plantation

Open flues covered until the permanent repair
Cracked crowns sealed or recast
Wind-loosened brick at the top relaid in fresh mortar
Storm debris cleared from the flue

Call (904) 920-5495 Free Inspection

The order of a storm repair

Hazards first, then the call
Utility and 911 hazards come first. Then describe what you see from the ground and we set the visit.
Top closed to the weather
An open flue, a broken chase top or loose courses are covered or made stable the same visit where safe.
Chimney checked top to bottom
Cap, crown, flashing, masonry and every flue are checked, and each finding is written down in order.
Permanent repairs in dry weather
Water-stopping work goes first, then structure, then finishes, each on its own line.

Drying out an inland chimney in Oakleaf Plantation

A chimney that took water through an open top needs time to dry before some repairs go on, inland or not. In Oakleaf Plantation, we close the top first and let the masonry dry before coatings or parging.

The wait is written on the estimate.

10% off any service booked within 72 hours of inspection

Homeowners in Oakleaf Plantation get the same 10% discount on storm work as on any other job.

Call (904) 920-5495 Free Inspection

What comes before looking at the chimney

Once the wind drops, the chimney waits behind bigger hazards. Downed power lines, a gas smell and structural damage to the house come first, and each has its own authority: the power company, the gas utility or 911, and emergency services.

Nobody should climb onto a wet roof, or one the storm has damaged, just to see a chimney. What can be seen safely from the ground, a missing cap, a leaning stack or bricks on the roof, is enough to describe on the phone. The close inspection follows when the roof is safe to walk. A description from the ground also tells us what to bring, so the first visit can close the chimney to the weather.

Temporary covers and their limits

A temporary cover over an open flue or a broken chase top keeps rain out until the permanent repair. It can be a fitted cover strapped in place, sheeting over a chase or a cap set on without its final fasteners.

A covered flue cannot be used. Any fireplace or appliance that vents through it stays off until the cover comes off, and we tag the fireplace so nobody lights it by mistake. The cover and its removal are written on the estimate as their own line. A cover left on too long traps moisture in the flue, so its removal date is agreed when it goes on.

How a replacement cap is fastened

Caps come off in wind when they were fastened weakly: a few screws into a crumbling wash, a friction fit on the tile, or clamps that were never tightened. The cap maker's instructions say how their product is attached, whether by clamping to the flue tile, screwing to the crown or anchoring into masonry.

We follow those instructions and fasten into sound material, which may mean repairing the crown first. The cap matches the flue size, and how it is fastened is written on the ticket for whoever works on it later. Stainless fasteners are used with stainless caps, since mixing metals invites corrosion at the joint.

What we check after a storm in Oakleaf Plantation

Hazards from the ground noted first, before anyone goes up
Chase top fabricated to measure with collar and storm collar
Damper worked free and checked after the soaking
Roofing work named for the roofer where it is needed

Before the fireplace is used again

Is a fire safe if the chimney looks fine from the yard?

Not until it has been checked. A cracked crown, a shifted tile or debris in the flue may not show from the yard, and a fire is a poor way to discover them.

Is the roofing around the chimney part of your repair?

We handle the flashing that belongs to the chimney. Damaged roofing itself is a roofer's work, and we coordinate so the two are done in the right order.