Chimney crown repair in Northside by local masons
A sound crown in Northside with hairline cracks gets sealed and stays in place. Local masons check it for free.
- Family owned and operated
- Free inspection and estimate
- Same-day service available
- Upfront pricing, no hidden fees
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
or call (904) 920-5495
Why Choose Us
Crown repair experts for Northside chimneys
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off when you book today
You get the cure time in writing, so you know when the fireplace in Northside can be used again.
- Free inspection and estimateWe map the cracks on your Northside crown and check the brick under it at no charge.
- Upfront pricing, no hidden feesCoating and recasting are both priced on paper, so you see the difference before choosing.
- 100% satisfaction guaranteedIf the finished crown is not right, tell us and we come back to put it right.
The brick under the crown
Months of water through a failed crown leave damage in the brick right under it. The top courses stay wettest, so their joints wash out and their faces flake first. Casting a new crown on top of loose or soft brick gives the new concrete a bad base.
Once the old crown is off, the top courses of your Northside chimney are checked by hand. Loose brick is relaid and open joints repointed before the forms go up, and that masonry work is priced separately with the reason beside it. Cracks on top of the chimney in Northside? Our masons tell you coat or recast after one look, so call (904) 920-5495.
Northside is one of the named neighborhoods of Jacksonville. Northside is part of Duval County.
What's Included
Crown work from crack map to cure
- Forms set with an overhang past every face of the brick
- Reinforcement placed inside the slab to control cracking
- Fresh concrete kept damp and covered while it cures
- Coat or recast decision for your Northside crown in writing
How It Works
How crown repair runs
-
Crown checked from the roof
We look at the slab, the brick right under it and the seal around each flue, then write down the option that fits with its price.
-
Old top cleaned or torn off
For a coating, the crown is cleaned and the wider cracks filled. For a recast, the old top comes off down to sound brick.
-
Coating brushed on or crown poured
A coating goes on in dry weather inside the maker's temperature range. A recast is formed with a slope, an overhang, a drip groove and a sealed joint at every flue.
-
Curing, then the cap goes back
New concrete stays covered and damp while it cures. The cap is refastened once the crown can hold it, and we show you the finished top.
Local Conditions
Standing water on flat crowns in Northside
A crown with no slope holds a puddle after every rain, and the concrete under it stays wet for days. That water carries grit into the cracks and keeps them growing as the slab heats and cools.
New crowns in Northside are sloped from the flue to the edge so rain leaves within minutes.
10% off your first service when you book today
Booking crown repair in Northside today? Your first service with us is 10% off.
The drip groove under the overhang
Water running off the edge of a crown wants to curl back along the underside and run down the brick face. A drip groove, a small channel cast into the underside of the overhang, breaks that film of water so it drops clear of the chimney.
The groove sits near the outer edge of the overhang, and it has to run continuously around all four sides. A groove that stops short at a corner lets water find its way around the end. A drip edge is one of the crown requirements in R1003.9.1, and the groove is how a cast crown provides it.
Fastening the cap to a new crown
A chimney cap has to be held down against wind, and how it is held matters to the crown. Screws driven down through the crown make holes that need sealing and can let water into the core of the chimney.
Where the cap design allows, its mount grips the flue tile instead, leaving the concrete with no holes in it. Where a cap must be fixed to the crown, the fasteners go in only after the concrete can take them, into sealed holes, and how the cap is attached is recorded. A cap that has worked loose before is checked for why.
Why a new crown does not go over a failed one
A thin layer of new concrete poured over a cracked mortar wash can look like a quick fix. It keeps the problems of the old top: the cracks underneath, the moisture trapped in the old material, and the missing bond break at the tile. Cracks in the old top tend to show through the new layer within a short time.
We take the failed top off and cast a full crown on sound masonry. It is more work on the day, and worth it, because an overlay that fails puts you back where you started with less to work with.
Free Inspection
Measured on the crown in Northside before pricing
- Crown type found: mortar wash, cast-in-place or precast
- Overhang, drip groove and slope for the new crown
- Chimney cap removal and reinstallation, with how it is fastened
- Cure time before the cap goes back and the fireplace is used
FAQ
Before your crown is coated or recast
Can I tell from the ground whether my crown is a mortar wash?
Sometimes. A thin gray layer that tapers to the edge with no overhang is likely a wash, while a thicker slab that projects past the brick is likely a cast crown. We confirm it from the roof.
Can a crown be repaired in the rain?
No. Coatings and fresh concrete both need dry conditions for a set time after they go on. Crown work is scheduled for dry weather, and rain protection is on hand in case a shower arrives early.
Our Services
More services in Northside
-
-
-
-
-
-
Learn more about chimney crown repairAll services in Northside
Have the crown on your Northside chimney looked at
Concrete bits on the roof in Northside? Our crown specialists find where they came from, free.
Free Inspection