Local chimney inspection in Northside
A free inspection in Northside that measures clearances, reads the flue end to end and flags any needed work.
- Family owned and operated
- Free inspection and estimate
- Same-day service available
- Upfront pricing, no hidden fees
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
or call (904) 920-5495
Why Choose Us
Local inspection experts for Northside homes
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off when you book today
Gas vents and stove connectors are followed end to end, since they share the chimney.
- Free inspection and estimateThe chimney inspection at your Northside home costs nothing, and a clean result is reported as clean.
- Locally owned and operatedA locally owned business shows you what it sees, so the findings are yours to check.
- No hidden feesAny repair that comes out of the inspection gets its own line and price before you decide.
Access and timing on inspection day
The inspection needs three kinds of access: the fireplace or stove, the roof where it can be walked safely, and the attic where the chimney passes through. Clear a path to the hearth, move anything stored against the chimney in the attic if you can, and point out the hatch. Pets are happier shut away while ladders move in and out.
Someone should be home for the last part, when the findings are walked through at the chimney. The middle of the visit runs without you, so the Northside appointment does not need your whole day. Keys, gate codes or alarm details are best shared when you book. Our inspection pros cover Northside; call (904) 920-5495 and the visit is free.
Northside sits in Duval County. Northside is inland, more than about six miles from the coast.
What's Included
Inspection work we handle in Northside
- Hearth extension measured against the opening
- Attic airspace and fireblocking checked where reachable
- Stove connectors and gas vents followed end to end
- Findings for your Northside home explained on site
How It Works
From firebox to cap in Northside
-
Firebox, damper and throat first
We start where the fire sits, checking the firebrick, the hearth, the damper and the chamber above it.
-
Flue checked end to end
A strong light and a mirror from below, and a look from the top where footing is safe, show the full run of tile.
-
Clearances, attic and roof
Gaps to framing are measured where we can reach them, then the crown, cap, flashing and height are checked up top.
-
Findings shown, repairs ranked
You see each finding on site, and any repair goes on a written estimate ranked by how soon it matters.
Local Conditions
Gas appliance vents in Northside chimneys
Gas appliances make no creosote, but their exhaust carries water vapor and carbon monoxide, so the vent has to stay clear, connected and sized for the appliance.
We follow any gas vent in your Northside chimney from the appliance to the top.
10% off your first service when you book today
First visit with us? The inspection is free and the first service is 10% off.
Wood trim and mantels near the opening
Wood around a fireplace opening has its own limits. The code sets how close combustible trim and a mantel may sit to the opening and, within a set distance, how far they may stick out for each inch they sit back from it (FBC R1001.11). Radiant heat can dry and darken nearby wood over the years.
The inspection measures what is there against those limits. A mantel added after the fireplace was built is worth measuring twice, since it came later than the design. Scorching, darkened paint or a surface too hot to touch after a fire are clues that trim sits too close even before the tape comes out.
The thimble in the chimney wall
A thimble is the sleeve a connector passes through to enter the chimney from the side. The code wants it made of fireclay, rigid refractory or metal, and fitted so the connector cannot pull out of the inlet or reach past the inner face of the liner (FBC R1003.16).
The inspection checks that the thimble is intact, tight in the masonry and at the right height for the stove. Cracked or crumbling thimbles, or a connector poking into the flue where it catches deposit, are noted, along with how close the thimble sits to any wood framing. An open thimble with no connector in it is noted too, since it lets room air into the flue.
Chimney height against the roof around it
Height is set by code: a chimney has to rise 3 feet or more above its roof penetration, and 2 feet or more above anything on the building within a 10-foot radius (FBC R1003.9). A stack that falls short can struggle to draw when wind crosses the roof or when a taller part of the house sits close by.
The inspection measures from the roof at the chimney and checks the circle around it, which is where an addition or a raised roof section can put a once-compliant chimney out of line. A short stack is recorded with the height it lacks.
Free Inspection
Firebox, flue, roof and attic
- Damper opened and closed through its travel, with seal and frame noted
- Stove connector support, joints, pitch and thimble condition recorded
- Factory-built listing label read and parts compared with the manual
- A plain list of anything that could not be reached, and why
FAQ
Inspection questions from Northside
Do you inspect chimneys in Northside?
We do inspections in Northside. Tell us why you want one and what the fireplace burns, and we plan the visit around that.
Will you need to get into the attic?
If the chimney passes through an attic, yes, because the attic is where clearances to framing and fireblocking can be seen. If there is no safe access, the findings say what could not be checked.
Our Services
More services in Northside
-
-
-
-
-
-
Learn more about chimney and fireplace inspectionAll services in Northside
Firebox to cap, free
Every finding on your chimney in Northside is written down and ranked, safety items first.
Free Inspection