Chimney cap replacement in Northside by local cap pros
Rain, birds and sparks kept out of your flue in Northside, with a free inspection before any cap is chosen.
- Family owned and operated
- Free inspection and estimate
- Same-day service available
- Upfront pricing, no hidden fees
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
or call (904) 920-5495
Why Choose Us
Local cap experts for Northside chimneys
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off when you book today
Factory-built chimneys get the cap their maker lists, which keeps the fireplace in its tested setup.
- Free inspection and estimateWe measure every flue on your Northside chimney at no charge before any cap is ordered.
- Upfront pricing, no hidden feesThe cap model, its metal and the fastening are priced together, so the total is clear.
- Workmanship warrantyOur fitting and fastening carry the workmanship warranty, with the cap maker's terms in writing.
Starting with a tape measure
Replacing a chimney cap in Northside starts on the roof with a tape measure. The new cap has to fit the tile it sits on, clear that tile by the height its maker lists, and carry a screen that keeps embers and animals in check without slowing the draft.
We measure each flue, look over the crown underneath, and write down which cap fits and why. The model, the metal and the way it fastens are settled before anything is ordered. If the old cap was the wrong size, that goes in writing too, because refitting the same wrong size would repeat the failure. Cap missing or rusted on your Northside chimney? Our cap pros measure the flue for free; just call (904) 920-5495.
Northside is one of the named neighborhoods of Jacksonville. Northside falls within Duval County.
What's Included
Cap replacement work for Northside homes
- Old or rusted cap removed and hauled away
- Fasteners in a metal that matches the cap
- Two-flue chimneys fitted with two caps or one cover
- Crown condition noted under a full-crown cap
How It Works
How chimney cap replacement runs
-
Every flue tile measured
On the free visit we measure each tile inside and out, and how far it stands above the crown.
-
Cap picked from the maker's chart
Model, metal grade and screen come from the sizing chart and our own numbers, never from the old cap.
-
Old cap off, new cap fastened
Set screws, a clamp band or masonry anchors are tightened to the maker's instructions, firm enough for a hard blow without cracking the clay.
-
Screen checked, debris hauled off
We check the mesh along every edge, clear out any nest material, haul away the old cap and show you the finished top.
Local Conditions
What wears out caps in Northside
At more than about six miles from the coast, Northside is far enough inland that salt does less to caps here. Rain, soot and wind do the work: mesh rusts where water lingers, soot clogs the screen, and set screws loosen.
The fix is a cap sized to the tile, in a metal that suits the roof, fastened by the maker's method.
10% off your first service when you book today
Say you are new to us when you book the cap, and 10% comes off.
Band-mount caps for tiles with rough edges
Band-mount caps clamp around the outside of the flue tile instead of reaching inside it. A metal band or a set of screws draws the cap's base against the tile's outer faces. This style suits tiles whose inside edge is chipped or out of square, and tiles slightly larger than a slip-in model allows. It still needs the tile to stand clear of the crown by enough height to give the band something to grip.
We tighten the band evenly on every side, because uneven pressure on clay tile concentrates stress at one corner, and a cracked tile turns a cap job into a flue repair. The band's metal matches the cap's, so the two do not corrode against each other.
Why a screen needs four times the flue's open area
Beyond the opening size, the code sets how much total open space the screen must have. After the wire and frame are subtracted, the screen's clear area has to reach at least four times the clear area of the flue outlet under it. Wire takes up part of every square inch of mesh, so the screen's overall size must be well beyond the flue opening to leave that much air path. The rule explains why a cap for a large flue is noticeably taller or wider than one for a small flue. A cap that looks generous from the yard can still fall short once the wire is counted, which is why we size from the maker's data rather than from appearance.
What to look for from the yard after a storm
Binoculars and a clear day are enough for a first look after bad weather. Stand where you can see the top of the chimney and check four things. Is the cap still square on the tile, or leaning? Is the lid flat, or lifted at one corner? Is the screen continuous all the way around, or is there a dark gap? Are there fresh rust streaks, screws or metal pieces on the roof below?
Any one of those is a reason to call before the next storm, and none of them needs you on a ladder. If you can, take note of which side of the chimney the damage faces, since it helps us plan the visit.
Free Inspection
Tile sizes we take in Northside before ordering
- Metal and grade named: galvanized, a stainless type, or copper
- Old cap and its fasteners taken off the roof
- Which appliance each flue serves, confirmed before a cap is chosen
- Fastener metal matched to the cap to avoid galvanic corrosion
FAQ
Before a new cap is ordered
Will you need to get inside the house?
Not for the roof work itself, as long as we can reach the roof safely. If the flue needs clearing from below, or an animal is involved, someone needs to let us in to the fireplace.
Can a cap go on if the crown is cracked?
A single-flue cap can, if the tile itself is sound, though the crown still lets water in around it. A full-crown cap needs sound concrete to anchor into, so the crown is repaired first.
Our Services
More services in Northside
-
-
-
-
-
-
Learn more about chimney cap installation and replacementAll services in Northside
Get your Northside chimney capped properly
Family-owned chimney professionals fit the cap in Northside themselves, and the first look is free.
Free Inspection